GB/T 28456-2012Testing specification for applications of IPsec protocol (English PDF)
IPsec协议应用测试规范
This is a limited preview
Buy now to download the full PDF (70 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28456-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 29, 2012
Implementation date
October 1, 2012
Scope
GB/T 28456-2012 is the English-translated version of IPsec协议应用测试规范.
GB/T 28456-2012 is the Chinese standard "Testing specification for applications of IPsec protocol". Its scope clause reads: This standard test content and test procedures were applied IPsec protocol specification.
This standard applies to measuring application IPsec protocol application development unit, third-party testing and certification bodies authorized user of IPsec and other protocols Reference used again. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 28456-2012
National Standard of the People's Republic of China
- ICS
- 35.020
- Classification
- L 80
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Abbreviations
- 5.1 Test Object Description
- 5.2 Test Description
- 5.3 Test Environment Note
- 6 test content
- 6.1 AH transport mode test content
- 6.2 AH tunnel mode test content
- 6.3 ESP transport mode test content
- 6.4 ESP tunnel mode test content
- 6.5 Transfer mode adjacent test content
- 6.6 Iterative tunnel mode test content
- 6.7 IKEv1 main mode test content
- 6.8 IKEv1 aggressive mode test content
- 6.9 IKEv1 quick mode test content
- 6.10 IKEv2 Initial Exchanges test content
- 6.11 IKEv2 create sub SA exchange test content
- 6.12 IKEv2 information exchange test content
- 7 Test Procedure
- 7.1 AH transport mode test step
- 7.2 AH tunnel mode test step
- 7.3 ESP transport mode test step
- 7.4 ESP tunnel mode test step
- 7.5 Transfer adjacent mode test step
- 7.6 Iterative tunnel mode test step
- 7.7 IKEv1 Main Mode Test Procedure
- 7.8 IKEv1 Aggressive Mode Test Procedure
- 7.9 IKEv1 quick mode test step
- 7.10 IKEv2 Initial Exchanges test step
- 7.11 IKEv2 create sub SA exchange test step
- 7.12 IKEv2 information exchange test step
- Appendix A (Informative Appendix) IPsec protocol specification
- Appendix B (Informative Appendix) IKEv1 key exchange mechanism
- Appendix C (Informative Appendix) IKEv2 key exchange mechanism
- References
1 Scope
This standard test content and test procedures were applied IPsec protocol specification.
This standard applies to measuring application IPsec protocol application development unit, third-party testing and certification bodies authorized user of IPsec and other protocols
Reference used again.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 5271.8-2001 Information technology - Vocabulary - Part 8. Security
GB/T 17178.1-1997 Information technology - OSI conformance testing methodology and framework - Part 1. Basic Concepts
3 Terms and Definitions
GB/T 5271.8-2001 defined and the following terms and definitions apply to this document.
3.1 IP Security Protocol IPsecurity
A set of security protocols for protecting IP communications. It is a series of optional protocol to IPv4, IPv6 is one of the components,
It is a network layer protocol. It provides authentication and encryption two security mechanisms. authentication mechanism so that the data recipient can confirm the number of IP communication
According to the sender's identity and whether the data during transmission has been tampered with; encryption mechanisms by encoding data to ensure data
Confidentiality, prevent data from being intercepted during transmission and compromised.
3.2 IPsec protocol application applicationoftheIPsecprotocol
Product or function module in accordance with the IPsec protocol standard to achieve.
3.3 Security Association
One kind of agreement between the two communicating entities set up in consultation, which describes how to use the Entity security services to communicate securely.
Security association includes information to perform a variety of network security services required.
3.4 Associated Internet Security and Key Management Protocol
Defines establish, negotiate, modify and delete security associations process and packet formats, exchange and defines key generation and authentication data
Payload format. The format for the transfer key and authentication information provides a consistent framework.
3.5 Load payload
ISAKMP traffic exchanged form of transmission of information, it is the basic unit structure ISAKMP message.
3.6 Authentication Header
A protocol belonging IPsec for providing data integrity IP datagram, data origin authentication and anti-replay service attack.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 70 pages — is available in the English PDF.
Similar standards
How to Download GB/T 28456-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 28456-2012
$1,160.00