GB/T 27835-2011Test method for hazard classification of chemicals - 12m drop test (English PDF)
化学品危险性分类试验方法 12m跌落试验
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 27835-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2011
Implementation date
August 1, 2012
Scope
GB/T 27835-2011 is the English-translated version of 化学品危险性分类试验方法 12m跌落试验.
GB/T 27835-2011 is the Chinese standard "Test method for hazard classification of chemicals - 12m drop test". Its scope clause reads: This standard specifies the chemical hazard classification test 12m drop test required terms and definitions, equipment, and material testing methods, Test procedures, test results and report instances.
This standard applies to determine a test unit (article, packaged goods or in addition to a homogeneous liquid outer packaging material) can withstand under free Fall impact without obvious fire or explosion hazard.
This standard does not assess whether the package to withstand impact test is used. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 27835-2011
National Standard of the People's Republic of China
- Classification
- A 80
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Explosion
- 3.2 Deflagration
- 3.3 Mass explosion
- 3.4 Explosive substances
1 Scope
This standard specifies the chemical hazard classification test 12m drop test required terms and definitions, equipment, and material testing methods,
Test procedures, test results and report instances.
This standard applies to determine a test unit (article, packaged goods or in addition to a homogeneous liquid outer packaging material) can withstand under free
Fall impact without obvious fire or explosion hazard.
This standard does not assess whether the package to withstand impact test is used.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 14371 Transport of Dangerous Goods explosives acceptance and classification procedures and fitting requirements,
GB/T 14659 civilian blasting equipment term
United Nations "on the Recommendations on the Transport of Dangerous Goods Model Regulations" (sixteenth revised edition)
United Nations "on the Transport of Dangerous Goods Manual of Tests and Criteria Recommendations" (fifth revised edition)
3 Terms and Definitions
United Nations "on the Recommendations on the Transport of Dangerous Goods Model Regulations", "Transport of Dangerous Goods Recommendations Tests and Criteria hand
Book ", GB 14371 and GB/T 14659 and defined by the following terms and definitions apply to this document.
3.1 Explosion
In a very short time, high temperature and release a large amount of gas pressure resulting chemical reaction or state changes in the surrounding medium.
3.2 Deflagration
A quick burn, sometimes accompanied by flames, sparks or burning particles spattering. Substance in advance to speed the reaction zone unreacted
Less than the speed of sound in the unreacted substance.
3.3 Mass explosion
Instant response to an almost explosive load.
3.4 Explosive substances
Itself capable of generating gas by chemical reaction, the temperature, pressure and velocity high enough to cause damage to the surrounding material. That pyrotechnic substance
So do not evolve gases are also included.
GB 30000.1-2024 | GB/T 28577-2021 | GB 30000.10-2013 | GB/T 27825-2011 | GB 27834-2011 | GB 27833-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 27835-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 27835-2011
$85.00