GB/T 27757-2011Reference electrodes for the measurement of pH value (English PDF)
pH值测定用参比电极
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 27757-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2011
Implementation date
May 1, 2012
Scope
GB/T 27757-2011 is the English-translated version of pH值测定用参比电极.
GB/T 27757-2011 is the Chinese standard "Reference electrodes for the measurement of pH value". Its scope clause reads: This standard specifies the pH value determined by the reference electrode was classified, requirements, test methods, inspection rules, marking, packaging, transportation, storage and so on.
This standard applies to mercury/calomel, silver/silver chloride electrode material within the general type of saturated potassium chloride reference electrode, the other reference electrode Pole for implementation (hereinafter referred to as electrode). Its clauses include requirements.
Found what you need?
Document preview — GB/T 27757-2011
National Standard of the People's Republic of China
- ICS
- 71.040.01
- Classification
- N 53
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 4 Requirements
- 4.1 Electrode normal operating conditions
- 4.2 electrode potential bias
- 4.3 electrode stability
1 Scope
This standard specifies the pH value determined by the reference electrode was classified, requirements, test methods, inspection rules, marking, packaging, transportation, storage and so on.
This standard applies to mercury/calomel, silver/silver chloride electrode material within the general type of saturated potassium chloride reference electrode, the other reference electrode
Pole for implementation (hereinafter referred to as electrode).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191-2008 Packaging - Pictorial signs (ISO 780.1997, MOD)
GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample
Programme (ISO 2859-1.1999, IDT)
GB/T 2829-2002 periodic inspection Sampling procedures and tables (suitable for process stability test)
GB/T 11606-2007 analytical instruments environmental test methods
Category 3
Divided by the use of premises.
a) Laboratory;
b) line type.
4 Requirements
4.1 Electrode normal operating conditions
Electrode should be able to work under the following conditions.
a) Ambient temperature. 5 °C ~ 40 °C;
b) Relative humidity. <=90%;
c) the measured solution temperature. 0 °C ~ 70 °C;
d) The junction is no serious corrosion and contamination of water.
4.2 electrode potential bias
Electrode potential deviation shall not exceed ± 3mV.
4.3 electrode stability
Stability of the electrode should meet the following requirements.
a) Laboratory. ± 2mV/7h;
b) On-Line. ± 3mV/24h.
GB/T 17360-2020 | GB/T 25929-2010 | GB/T 25930-2010 | GB/T 21187-2026 | GB/T 21186-2026 | GB/T 27756-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 27757-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 27757-2011
$135.00