Valid

GB/T 27684-2011Seamless and welded fittings for titanium and titanium alloy (English PDF)

钛及钛合金无缝和焊接管件

Preview PDF

This is a limited preview

Buy now to download the full PDF (26 pages)

Need quotation for your management?

Get a formal quotation for GB/T 27684-2011 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 30, 2011

Implementation date

October 1, 2012

Scope

GB/T 27684-2011 is the English-translated version of 钛及钛合金无缝和焊接管件.

GB/T 27684-2011 is the Chinese standard "Seamless and welded fittings for titanium and titanium alloy".

Its scope clause reads: This standard specifies the titanium and titanium alloy seamless and welded pipe fittings (including elbow, reducer fittings, tee, loose flange lap joint) and symbols Definitions, requirements, test methods, inspection rules and signs, packaging, transportation, storage and quality certificate with the contract (or purchase order) content.

This standard applies to titanium and titanium alloy seamless and welded pipe manufacture. Its clauses include symbols and definitions.

Found what you need?

Document preview — GB/T 27684-2011

National Standard of the People's Republic of China

ICS
77.150
Classification
H 64

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions

1 Scope

This standard specifies the titanium and titanium alloy seamless and welded pipe fittings (including elbow, reducer fittings, tee, loose flange lap joint) and symbols

Definitions, requirements, test methods, inspection rules and signs, packaging, transportation, storage and quality certificate with the contract (or purchase order) content.

This standard applies to titanium and titanium alloy seamless and welded pipe manufacture.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the edition are not applicable to the present file. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 2965 Titanium and titanium alloy bars

GB/T 3620.1 titanium and titanium alloys and chemical composition

GB/T 3621 Titanium and titanium alloy sheet

GB/T 3623 titanium and titanium alloy wire

GB/T 3624 titanium and titanium alloy tube

GB/T 3625 heat exchangers and condensers with titanium and titanium alloy tube

GB/T 8180 Titanium and titanium alloy products, packaging, labeling, transportation and storage

GB/T 9118.1 sudden face welding neck collar with loose steel pipe flanges

GB/T 9118.2 ring connection with welding neck collar with loose steel pipe flanges

JB/T 4730 Pressure Equipment NDT JB/T 4745 Titanium welded vessels

ASMEB16.5-2003 pipe flanges and flanged fittings (PipeFlangesandFlangedFittings)

ASMEB16.9-2007 factory manufacturing forged pipe fittings (Factory-MadeWroughtButtweldingFittings)

ASMEB36.10M-2004 wrought steel welded and seamless pipe (WeldedandSeamlessWroughtSteelPipe)

ASMEB36.19M-2004 stainless steel tube (StainlessSteelPipe)

3 Symbols and Definitions

The following symbols and definitions apply to this document.

DN metric units pipe nominal size; piping system components for the combination of letters and numbers Size designation. It DN letters

And followed by a dimensionless integer numbers. This figure is connected with the end portion of the aperture member or outer diameter (expressed in mm) the size and other characteristics of the direct

Related.

PN and mechanical properties and dimensional characteristics of piping system components relevant for identifying a reference letter and number combinations. It consists of the letters

PN and dimensionless numbers.

NPS imperial units pipe nominal size.

A 90 ° bend from the center of one end face to another end face, 180 ° bend to the distance from the center of the end face of the center.

b 45 ° elbow to the center from the end face.

c three, four branch exit from the center axis to the end surface of the body.

GB/T 26008-2020 | GB/T 37520-2019 | GB/T 32185-2015 | GB/T 20927-2026 | GB/T 14845-2026 | GB/T 10575-2026 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 26 pages — is available in the English PDF.

Similar standards

How to Download GB/T 27684-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
26 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 27684-2011

$465.00