GB/T 27663-2011Total station (English PDF)
全站仪
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for GB/T 27663-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2011
Implementation date
May 1, 2012
Scope
GB/T 27663-2011 is the English-translated version of 全站仪.
GB/T 27663-2011 is the Chinese standard "Total station". Its scope clause reads: This standard specifies the total station level and the basic parameters, requirements, test methods, inspection rules, marking, packaging, transportation, storage and so on.
This standard applies to the total station (hereinafter referred to as the instrument). Its clauses include requirements.
Found what you need?
Document preview — GB/T 27663-2011
National Standard of the People's Republic of China
- ICS
- 17.180.30
- Classification
- N 31
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 4 Requirements
- 6 Inspection Rules
- 7 signs, packaging, transportation and storage
- References
1 Scope
This standard specifies the total station level and the basic parameters, requirements, test methods, inspection rules, marking, packaging, transportation, storage and so on.
This standard applies to the total station (hereinafter referred to as the instrument).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 2829 periodic inspection Sampling procedures and tables (suitable for process stability test)
GB/T 3161 theodolite
GB 7247.1-2001 Safety of laser products - Part 1. Equipment Classification, Requirements and User's Guide
GB/T 13384 mechanical and electrical products packaging General technical conditions
GB/T 25480 Instrumentation transportation, storage and basic environmental conditions and test methods
Level 3 and the basic parameters
Instrument grade their nominal angle measurement standard deviation divided mbeta Table 1. Different levels of standard deviation ranging another phase
Corresponding to the requirements shown in Table 12.
Table 1
Level I II III IV mbeta range/( ") mbeta<=1.0 1.0 \u003cmbeta<=2.0 2.0\u003cmbeta<=6.0 6.0\u003cmbeta<=10.0
4 Requirements
4.1 Electronic angle measurement section requires
4.1.1 one measuring the horizontal standard deviation
One measuring the horizontal standard deviation shall not exceed the requirements in Table 2.
Table 2
Grade and the tolerances
I II III IV
0.5 "1.0" 2.0 "5.0" 10.0 "
One measuring the horizontal standard deviation/( ") 0.5 0.7 1.6 3.6 7.0
GB/T 22062-2020 | GB/T 4315.1-2009 | JY/T 011-1996 | GB/T 45410.7-2026 | GB/T 45410.5-2026 | GB/T 45410.1-2025 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
Referenced standards
Cited by
- JY/T 0598-2017Equipment specifications for the major of modern forestry technology in vocational schools
- JY/T 0599-2017Equipment specifications for the major of forestry technologyin vocational colleges
- JY/T 0600-2017Equipment specifications for the major of agricultural and rural water in vocational schools
- JY/T 0601-2017Equipment specifications for the major of hydraulic engineering in vocational colleges
Similar standards
How to Download GB/T 27663-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 27663-2011
$285.00