Valid

GB/T 27571-2011Rubber hose and hose assemblies for conveying concrete (English PDF)

输送混凝土用橡胶软管及软管组合件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 27571-2011 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 5, 2011

Implementation date

May 1, 2012

Scope

GB/T 27571-2011 is the English-translated version of 输送混凝土用橡胶软管及软管组合件.

GB/T 27571-2011 is the Chinese standard "Rubber hose and hose assemblies for conveying concrete".

Its scope clause reads: This standard specifies the nominal inside diameter of 102 to 152 concrete delivery Classification Rubber hoses and hose assemblies, structure, size and Tolerance, requirements, test frequency, marking, packaging, transport and storage.

This standard applies at an ambient temperature of -30 °C ~ 70 °C to use positive and negative pressure conveying concrete, mud rubber hose (with Hereinafter referred to as hose) and hose assemblies (hereinafter referred to as the assembly). Its clauses include structure.

Found what you need?

Document preview — GB/T 27571-2011

National Standard of the People's Republic of China

ICS
83.140.40
Classification
G 42

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 4 Structure
  • 4.1 Hose
  • 4.2 assembly

1 Scope

This standard specifies the nominal inside diameter of 102 to 152 concrete delivery Classification Rubber hoses and hose assemblies, structure, size and

Tolerance, requirements, test frequency, marking, packaging, transport and storage.

This standard applies at an ambient temperature of -30 °C ~ 70 °C to use positive and negative pressure conveying concrete, mud rubber hose (with

Hereinafter referred to as hose) and hose assemblies (hereinafter referred to as the assembly).

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 1689 Determination of abrasion resistance of vulcanized rubber (in Akron machine)

GB/T 5563 Rubber and plastics hoses and hose assemblies - Hydrostatic testing

GB/T 5565 rubber or plastic tubing and non-reinforced hose bending test

GB/T 5567 Rubber and plastics hoses and hose assemblies - Determination of suction resistance flat performance

GB/T 9573 Rubber and plastics hoses and hose assemblies size measurement method

GB/T 9575 General Industrial Rubber and plastics hose diameters and tolerances, and tolerances on length

GB/T 9576 Rubber and plastics hoses and hose assemblies for selection, storage, use and maintenance guide

GB/T 9577 Rubber and plastics hoses and hose assemblies marking, packaging and transport rules

GB/T 14905 Determination of strength between adhesive layers of rubber and plastic hoses

HG/T 2185 Rubber hose appearance quality

Category 3

According to the structure and hose pressure capacity divided into the following typed.

- A type. the enhancement layer hose ply;

- B type. reinforced hose layer made of rope wound layers and ply;

- C and D. enhancement layer wire rope (or wire) wound hose.

4 Structure

4.1 Hose

Hose should wear rubber lining layer, reinforcing layer and wear-resistant rubber composition of the weathering of the outer cover.

4.2 assembly

Assembly shall be made in accordance with this standard hose and fittings assembly and permanent solid and reliable, the material should ensure that the pipe joint assembly

Function implementation. Recommended connection in the form of a flange.

Assembly should follow manufacturer instructions on the proper assembly of the assembly.

GB/T 30314-2021 | GB/T 28267.4-2015 | GB/T 28267.3-2015 | GB/T 16412-2026 | GB/T 15902-2026 | GB/T 10546-2026 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 27571-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 27571-2011

$135.00