Valid

GB/T 27408-2010Quality control in laboratories evaluating validity of non-standard test method practice for a linear relationship (English PDF)

实验室质量控制 非标准测试方法的有效性评价 线性关系

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 27408-2010 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

January 14, 2011

Implementation date

July 1, 2011

Scope

GB/T 27408-2010 is the English-translated version of 实验室质量控制 非标准测试方法的有效性评价 线性关系.

GB/T 27408-2010 is the Chinese standard "Quality control in laboratories evaluating validity of non-standard test method practice for a linear relationship".

Its scope clause reads: This standard specifies the test method between a non-standard (hereinafter referred to as X method) and the corresponding standard test method (hereinafter referred to as Y method) results Evaluation of linear relationship, the method used to further improve the overall operation of X range consistency.

This standard specifies the method of X-based inter-constant, proportional or linear bias correction methods and Y method reproducibility. This standard applies to uniform and stable materials to produce a continuous measurement of the numerical results and stable measurement system.

This standard applies to evaluate the type and characteristics of the material within the range studied correlation. This standard applies to measure system performance in a state of statistical control under the assumption of normality models to describe and predict.

This standard applies to the same material characteristics are the same or different measuring principle method of X and Y method consistency between the expected results of the evaluation. Its clauses include terms, definitions and symbols.

Found what you need?

Document preview — GB/T 27408-2010

National Standard of the People's Republic of China

ICS
03.120.30
Classification
A 41

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms, definitions and symbols
  • 3.1 Terms and Definitions

1 Scope

This standard specifies the test method between a non-standard (hereinafter referred to as X method) and the corresponding standard test method (hereinafter referred to as Y method) results

Evaluation of linear relationship, the method used to further improve the overall operation of X range consistency.

This standard specifies the method of X-based inter-constant, proportional or linear bias correction methods and Y method reproducibility.

This standard applies to uniform and stable materials to produce a continuous measurement of the numerical results and stable measurement system.

This standard applies to evaluate the type and characteristics of the material within the range studied correlation.

This standard applies to measure system performance in a state of statistical control under the assumption of normality models to describe and predict.

This standard applies to the same material characteristics are the same or different measuring principle method of X and Y method consistency between the expected results of the evaluation.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 3358.2-2009 Statistics Vocabulary and symbols - Part 2. Applied Statistics

Assessed and treated in GB /statistical processing and interpretation of normal sample outliers T 4883 data

GB/T 4889 Statistical processing and interpretation of the normal distribution with mean and variance estimation test

GB/T 27407 laboratory quality control use performance statistics for quality assurance and control chart technical evaluation and analysis of the measurement system

3 Terms, definitions and symbols

GB/T 3358.2-2009 established in the following terms, definitions and symbols apply to this standard.

3.1 Terms and Definitions

3.1.1 Intermediate precision conditions

Under certain conditions different basic observation, according to the same test method, the same test/measurement object to obtain an independent test/measurement results

Observing conditions.

Note. The four basic viewing conditions are. time, calibration, operator and equipment.

[Adapted from GB/T 3358.2-2009]

3.1.2 Intermediate precision

Precision under intermediate precision conditions.

[Quoted from GB/T 3358.2-2009]

3.1.3 Intermediate precision standard deviation

Standard deviation of test results or measurement results obtained under intermediate precision conditions.

[Quoted from GB/T 3358.2-2009]

GB/T 2829-2025 | GB/T 6379.6-2009 | GB/T 2828.2-2008 | GB/T 40681.7-2026 | GB/T 16307-2026 | GB/T 27407-2010 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 27408-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 27408-2010

$195.00