Valid

GB/T 27341-2009Hazard analysis and critical control point (HACCP) system - General requirements for food processing plant (English PDF)

危害分析与关键控制点（HACCP）体系食品生产企业通用要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 27341-2009 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

February 17, 2009

Implementation date

June 1, 2009

Scope

GB/T 27341-2009 is the English-translated version of 危害分析与关键控制点（HACCP）体系食品生产企业通用要求.

GB/T 27341-2009 is the Chinese standard "Hazard analysis and critical control point (HACCP) system - General requirements for food processing plant".

Its scope clause reads: This standard specifies the general requirements of Hazard Analysis and Critical Control Point (HACCP) System for food processing plant, so as to make sure they are able to provide safe food complying with laws and regulations and the customer's requirements.

This standard is applicable to the establishment, implementation and assessment of HACCP system of food processing (catering) plant, including the purchasing, processing, packaging, storing and transporting of raw material and food packaging material. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 27341-2009

National Standard of the People's Republic of China

ICS: 67.040
Classification: X 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents
Foreword I
Introduction II
1 Scope
2 Normative References
3 Terms and Definitions
4 HACCP System of Plant
4.1 General Requirements
4.2 Document Requirements
5 Management Responsibilities
5.1 Management Commitment
5.2 Food Safety Guideline
5.3 Responsibility, Authority and Communication
5.4 Internal Review
5.5 Management Review
6 Prerequisite Plan
6.1 General
6.2 Human Resource Security Plan
6.3 Good Manufacture Practice (GMP)
6.4 Sanitation Standard Operation Procedure (SSOP)
6.5 Safety and Sanitation Security System of Raw Material and Food Packaging Material
6.6 Maintenance Plan
6.7 Marking and Tracing Plan and Product Recall Plan
6.8 Emergency Plan
7 Establishment and Implementation of HACCP Plan
7.1 General
7.2 Preliminary Steps
7.3 Hazard Analysis and Control Measures Preparation
7.4 Determination of Critical Control Point (CCP)
7.5 Determination of Critical Limit
7.6 CCP Monitoring
7.7 Correction Measures for Establishment of Critical Limit Deviation
7.8 Confirmation and Verification for HACCP Plan
7.9 Maintenance of HACCP Plan Record
Appendix A (Informative) Judgment Tree for CCPs

1 Scope

This standard specifies the general requirements of Hazard Analysis and Critical Control Point (HACCP) System for food processing plant, so as to make sure they are able to provide safe food complying with laws and regulations and the customer's requirements.

2 Normative References

The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending errors in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies.

GB/T 19538 Hazard Analysis and Critical Control Point (HACCP) System and Guidelines for Its Application

GB/T 22000 Food Safety Management Systems - Requirements for Any Organization in the Food Chain

3 Terms and Definitions

For the purposes of this standard, the terms and definitions specified in GB/T 22000 and GB/T 19538 and those listed below apply.

3.1 Raw material

All intended products articles or substances constituting food constituent or composition.

Note: including materials, auxiliary materials and additives contained in foods or all intended substances of other source.

3.2 Potential hazard

Food safety hazard which may occur in case of no precaution.

3.3 Significant hazard

Potential hazard which is much more likely to occur and may result in disease or injury in case of no control.

Note: "much more likely to occur" and "result in disease or injury" mean that the hazard has "probability" and "severity".

3.4 Operation limit

The operation index established in order to avoid deviation of monitoring index from critical limit.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Cited by

Similar standards

GB/T 15091.1-2026|GB/T 15091.2-2026|GB/T 18525.11-2026|GB/T 21304-2026|GB/T 21922-2026|GB/T 47138-2026

How to Download GB/T 27341-2009

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.