GB/T 27027-2008Guidelines for corrective action to be taken by a certification body in the event of misuse of its mark of conformity (English PDF)

Foreword

This standard is identical with ISO Guide 27. 1983 "certification bodies mistakenly take corrective action with its mark of conformity Implementation Guide." for the ease of use, this standard has been modified following editorial.

--- "The Guide" unified translated as the "standard";

--- According to the relationship context, removed the "1.1.1 ~ 1.1.5," the article number changed to "---";

--- Chapter 9, only the "9.1" does not follow the terms, deleted "9.1" bar number.

This standard certification and accreditation by the National Standardization Technical Committee (SAC/TC261) and focal points.

This standard was drafted. China Electronics Standardization Institute, the Certification and Accreditation Regulatory Commission, China National Conformity Assessment Accreditation center, Nanterre and Certification Center, China Building Materials Inspection and Certification Center, China Quality Certification Center, China Certification Center EMC, Japan Electric Information Systems (China) Co., Ltd. Dayong software limited liability company, Tongfang Co., Ltd.

1 Introduction

1.1 The purpose of the standard is to identify a set of procedures for certification bodies (non-governmental) into account when deciding how to address the following issues.

a) According to the report issued by the certification body conformity marking misuse 1); or

b) subsequently found certified products hazardous 2).

Measures taken by the certification body, as the case may be. For example, the misuse of the law conformity marking requirements; certification bodies and misuse mark the severity of misuse;; the nature of blogs organizations contract or agreement is unintentional misuse or intentional; the product is hazardous 3).

The manufacturer or seller of goods and misuse flag may have two distinct situations, namely as a misuse or later found with a logo Products hazardous discoverer.

Foresee all the potential misuse or any other form may result in products with the logo becomes harmful forms of use than prevent Ming Obvious and common mistake is more difficult to form. These hazards arising from different situations need to take corrective action, but in each case the responsibility any assessment needs to be completely different considerations.

Certification bodies in deciding what corrective measures, it is necessary to consider the production and marketing of products that a lot of problems, but also to protect their flag may Letter of help due to misuse flag misguided people, equal treatment of competitors to use the logo. In general, correct this Standard Measures need to meet the following prerequisites.

--- Certification schemes include the use of marks of conformity, the marks of conformity with the respective certified products.

--- CB has its own registered marks of conformity or at least use its logo certified agency headquarters where national law Protection.

--- Certification bodies and allowed to use the logo have signed between party conformity marking use or misuse of action in contract or legal effect Forces agreement.

--- Allowed to use the logo for certified products is competent to carry out continuous controls to ensure that all the provisions of the contract or agreement.

--- Unless authorization and control certification body shall not be applied to product conformity mark.

1.2 forge mark certification body or without any contract or agreement and the use of marks of conformity, the certification body shall normally take strong Corrective measures, can be taken in accordance with the relevant provisions of national law relating to forgery and misuse of flags.

1) "misuse" may take many forms, such as.

a) the use or misuse flag logo on defective products, defective products, such as. breach of contract and improper quality control and certification body or laboratory assessment Given is incorrect;

b) are not allowed to use the logo, for example, mark appears on the non-certified products.

2) subsequently found hazardous products causes.

a) Standard inappropriate;

b) unexpected end-use products;

c) manufacturing defects.

3) This standard only for the use of marks of conformity when corrective action; if necessary, the circumstances of the certificate of conformity may be considered at a later stage, this standard main If for non-governmental certification bodies, but the implementation of a similar certification system in government agencies may also be used.

2 Terms and definitions

Misuse who later found hazardous products producers or other parties responsible for providing the use of the product, received from the user, or distribution of the market place