GB/T 27007-2011Conformity assessment -- Guidance for drafting normative documents suitable for use for conformity assessment (English PDF)

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

This standard is identical with ISO/IEC 17007:2009 "Conformity assessment with conformity assessment guidelines for the preparation of normative documents." ISO/IEC 17007 by the ISO Committee on conformity assessment (CASCO) developed to replace the ISO/IEC Guide 7.1994 "Drafting qualified Evaluation of guidelines for the preparation, "a standard.

For ease of use, the standard ISO/IEC 17007:2009 made the following editorial changes.

a) Remove the ISO foreword;

b) the text appears in all the "international standard" place, with all the "standard" replacement;

c) Appendix A "Conformity Assessment Toolbox" column corresponds to the addition of a "national standard number," and the current status.

This standard certification and accreditation by the National Standardization Technical Committee (SAC/TC261) and focal points.

This standard was drafted. Certification and Accreditation Regulatory Commission, China Electronics Standardization Institute, China National Conformity Assessment Accreditation center, Quality Mark Certification Group Co., Ltd., China National Institute of Standardization, China Quality Certification Center.

Introduction

This standard provides for the preparation of conformity assessment normative documents (such as standards, technical specifications, procedures and regulations) principles and guidelines in order to the corresponding conformity assessment activities are clear, clear understanding of these files.

Conformity assessment activities include testing, inspection and certification of various forms, such as the results of these activities to the statement, report, certificate of conformity Other signs and proof of license or authorization mode to be represented (see GB/T 27000).

The standard for users to use the following.

--- Do not use the ISO/IEC Guide standard-setters;

NOTE. The standard setters using ISO/IEC Guide refers to the ISO and IEC under the committee, they must follow the development of the standard ISO/IEC Guide Regulation Set, ISO/IEC Guide details the requirements for the preparation of standards, guidelines Part 2 6.7 with specific provisions for conformity assessment to prepare normative documents Seeking to make provisions. In China, the assessment of conformity with normative documents do not use the ISO/IEC Guide, but should follow the GB/T 1.1, and this standard Claim.

--- Industry associations and alliances;

---buyer;

---Regulatory Authority;

--- Consumers and non-governmental organizations;

--- Authorized institution;

--- Conformity assessment bodies;

--- Owner conformity assessment programs; and

--- Other interested parties, such as insurance organizations.

This standard is intended to help users develop the aforementioned specific normative documents, which may be mandatory or non-mandatory Nature.

This standard is also mentioned specific field of conformity assessment ISO/IEC standards and guidelines, known as the conformity assessment toolbox. These criteria and indicators South Main is the result of ISO Committee on conformity assessment (CASCO) and the International Electrotechnical Commission (IEC ) cooperation. These references in this standard Common standards and guidelines in order to stress that these standards include consensus about the conformity assessment activities in international terms, the application of these standards and guidelines will facilitate conformity assessment results worldwide reproducibility and mutual acceptance.

For ease of understanding, this standard as far as possible avoid the use of technical terms. However, in some cases, the use of technical terms is inevitable of. For example, the requirements of normative documents may be involved in many different areas, such as specific materials, products, services, installation, process, system, person or mechanism. In the text of conformity assessment, these areas are "object of conformity assessment" examples. In order to avoid repeated throughout the text, use the the term "object of conformity assessment" instead, in Chapter 3 gives a definition of the term.

This standard is part of the guide is divided into three chapters.

--- Chapter 4 sets out five principles as the basis for the subsequent two chapters of the guide;

--- Chapter 5 provides the performance requirements specified object of conformity assessment guidelines for the preparation of normative documents;

--- Chapter 6 provides a predetermined conformity assessment system requires that guidelines for the preparation of normative documents.

Conformity assessment with conformity assessment Guidelines for the preparation of normative documents

1 Scope

This standard provides principles and guidelines for the development of the content comprising the normative documents.

--- Object of conformity assessment requirements to be met;

--- Proved possible provision adopted when the requirements for conformity assessment systems object of conformity assessment meets the requirements.

The standard for users to use the following. Do not use ISO/IEC Guide standards makers, trade associations and unions, purchasers, regulators Institutions, consumers and non-government groups, accreditation bodies, conformity assessment bodies, conformity assessment scheme owners and other interested parties, such as insurance organization.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 27000-2006 Conformity assessment - Vocabulary and general principles (ISO/IEC 17000:2004, IDT)

3 Terms and Definitions

GB/T 27000-2006 define the following terms and definitions apply to this document. For ease of use, the following is given again definition.

Conformity assessment system Conformity assessment rules, procedures and conformity assessment of management.

NOTE. conformity assessment system can operate at the level of international, regional, national or sub-national.

[GB/T 27000-2006, the definition 2.7] 3.2 Conformity assessment programs conformityassessmentscheme; conformityassessmentprogramme the same provisions applicable requirements, the specific object of conformity assessment procedures and specific rules relating to the conformity assessment system.

Note. Conformity assessment scheme can operate at the level of international, regional, national or sub-national.

[GB/T 27000-2006, the definition 2.8] 3.3 Object of conformity assessment Acceptance of conformity assessment of a particular material, product (including service), installation, process, system, person or body.

Note. According to GB/T 27000-2006,2.1, Note 2 rewritten.

Requirements specifiedrequirement Express needs or expectations.

Note. in such regulations, standards and technical specifications so normative documents of the requirements to make a clear explanation.