Valid

GB/T 26931-2011Scraps of zirconium and zirconium alloy (English PDF)

锆及锆合金废料

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 26931-2011 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 19, 2011

Implementation date

May 1, 2012

Scope

GB/T 26931-2011 is the English-translated version of 锆及锆合金废料.

GB/T 26931-2011 is the Chinese standard "Scraps of zirconium and zirconium alloy".

Its scope clause reads: This standard specifies the zirconium and zirconium alloy waste (hereinafter referred to as waste) requirements, test methods, inspection rules, marking, packaging, transportation, storage Storage, quality certificate and contract (or purchase order) content.

This standard applies to a variety of renewable raw materials as zirconium and zirconium alloy scrap. This standard does not apply to zirconium wastes on the environment and human hazardous wastes zirconium and zirconium alloys, such as the nuclear industry waste produced by dismantling equipment. Its clauses include terms and definitions; requirements.

Found what you need?

Document preview — GB/T 26931-2011

National Standard of the People's Republic of China

ICS
77.150
Classification
H 63

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Requirements

1 Scope

This standard specifies the zirconium and zirconium alloy waste (hereinafter referred to as waste) requirements, test methods, inspection rules, marking, packaging, transportation, storage

Storage, quality certificate and contract (or purchase order) content.

This standard applies to a variety of renewable raw materials as zirconium and zirconium alloy scrap.

This standard does not apply to zirconium wastes on the environment and human hazardous wastes zirconium and zirconium alloys, such as the nuclear industry waste produced by dismantling equipment.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 13747 (all parts) zirconium and zirconium alloy chemical analysis method

GB 16487.7 imported solid wastes as raw materials Environmental protection control standard non-ferrous metal scrap

GB/T 20927 titanium and titanium alloy scrap

GB/T 26314 Zirconium and Zirconium alloy grades and chemical composition

3 Terms and Definitions

GB/T 20927 Terms and Definitions "titanium and titanium alloy wastes" applies in this document.

4 Requirements

4.1 Classification

4.1.1

scrap grades include GB/T 26314 in all grades, other grades of scrap refer to this standard.

4.1.2

pure zirconium various grades, including general-purpose waste produced zirconium Zr-1, Zr-3 grades and nuclear industry Zr-0 grades can be grouped into the same

Species, and in accordance with Table 1 were graded.

4.1.3

waste according to the shape into massive waste (I class) and crumb-like waste (II class) categories, nine constituencies; divided into three levels according to quality, and its name

It shall comply with the requirements of Table 1.

4.2 Chemical composition

4.2.1

in accordance with Table 1 requirements for primary and secondary waste (except castings) chemical composition shall comply with GB/T 26314 in the appropriate grade.

When different grades of pure zirconium mixed scrap, whose chemical composition should be attributed to the composition of impurities in the batch of mixed waste in the highest grades.

4.2.2

The implementation of the chemical composition of zirconium and zirconium alloy casting scrap reference to the provisions of 4.2.1, but also by the supply and demand sides negotiated and contracts (Or orders) are indicated.

4.3 appearance quality

4.3.1

should not waste a surface oxidation.

4.3.2

Primary and secondary waste surfaces should be clean and free of grease. Should remove surface lubricants, copper sheath, and a graphite coating layer.

GB/T 37204-2018 | GB/T 21183-2017 | GB/T 26283-2010 | GB/T 44327-2024 | GB/T 26038-2023 | GB/T 23271-2023 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 26931-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 26931-2011

$135.00