Valid

GB/T 26828-2011Specication for multispectral antireflection coatings (English PDF)

多光谱减反射膜规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 26828-2011 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 29, 2011

Implementation date

December 1, 2011

Scope

GB/T 26828-2011 is the English-translated version of 多光谱减反射膜规范.

GB/T 26828-2011 is the Chinese standard "Specication for multispectral antireflection coatings". Its scope clause reads: This standard specifies the application in the optical system of the multi-spectral antireflection coating film classification, requirements, test methods and inspection rules.

This standard applies to the zinc selenide, zinc sulfide crystal plating multi-spectral infrared antireflection coating. Its clauses include requirements.

Found what you need?

Document preview — GB/T 26828-2011

National Standard of the People's Republic of China

ICS
17.180.01
Classification
N 30

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 4 Requirements
  • 4.1 General
  • 4.2 Coating area

1 Scope

This standard specifies the application in the optical system of the multi-spectral antireflection coating film classification, requirements, test methods and inspection rules.

This standard applies to the zinc selenide, zinc sulfide crystal plating multi-spectral infrared antireflection coating.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (excluding corrections) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 1185 optical components surface flaws

GB/T 2423.1 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold

GB/T 2423.3 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat test

GB/T 2423.17 Environmental testing for electric and electronic products Part 2. Test methods - Test Ka. Salt

GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan (GB/T 2828.1-2003, ISO 2859-1.1999, IDT)

GB/T 2829 periodic inspection Sampling procedures and tables (suitable for process stability test)

Category 3 3.1 Near-infrared/infrared dual band antireflection coating.

3.2

Vis/NIR/IR tri-band antireflection coating.

4 Requirements

4.1 General

The film should comply with the relevant standards and design requirements. If the requirements of this standard is inconsistent with the relevant design requirements, should be related to the pattern

Seeking prevail.

4.2 Coating area

Aperture optical components should be consistent with design requirements, should the entire aperture surface coating. Aperture not specified, it can be non-plating

Film surface data are shown in Table 1.

Table 1

The diameter of the optical component

Or maximum diagonal dimension cm

Non-coated surface

Maximum width

<=5 1mm

> 5 1mm additional width, diameter each additional 1cm, additional width increases 0.15mm

The optical properties of the coating after 4.3 parts

Multispectral sided plating antireflection film optical properties are shown in Table 2.

GB/T 22062-2020 | GB/T 4315.1-2009 | GB/T 4315.2-2009 | GB/T 26332.4-2026 | GB/T 26829-2011 | GB/T 26827-2011 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 26828-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 26828-2011

$85.00