GB/T 26804.6-2011Industrial control computer system - Function module - Part 6: Methods of evaluating the performance for digital input/output channel modules (English PDF)
工业控制计算机系统 功能模块模板 第6部分：数字量输入输出通道模板性能评定方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26804.6-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 29, 2011
Implementation date
December 1, 2011
Scope
GB/T 26804.6-2011 is the English-translated version of 工业控制计算机系统 功能模块模板 第6部分：数字量输入输出通道模板性能评定方法.
GB/T 26804.6-2011 is the Chinese standard "Industrial control computer system - Function module - Part 6: Methods of evaluating the performance for digital input/output channel modules".
Its scope clause reads: This section GB/T 26804 specifies the digital input and output channels of the template inspection test methods and inspection rules. This section applies to industrial control computer system for evaluating performance digital input output channel template. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 26804.6-2011
National Standard of the People's Republic of China
- ICS
- 25.040.40
- Classification
- N 18
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Test conditions
- 4.2 Power Condition
- 5 DI channel templates and basic performance test
- 5.1 Functional Check
- 5.2 performance test
- 6 DO channel templates and basic performance test
- 6.1 Functional Check
- 6.2 Performance test
- 7 structure size and appearance inspection
- 7.1 Size of inspection
- 7.2 appearance inspection
- 8 Power adaptability test
- 8.1 supply voltage sag test
- 8.2 Effect of the supply voltage short interruptions Test
- 8.3 supply voltage variations affect the test
- 9 common-mode immunity test
- 9.1 DI channel templates common-mode immunity test
- 9.2 DO channel template common mode interference Test
- 10 6 Environmental Impact test
- 10.1 Ambient Temperature Effect Test
- 10.2 Relative humidity test
- 10.3 Vibration Test
- 11 EMC immunity test
- 11.1 RFEMS Test
- 11.2 Power frequency magnetic field immunity test
- 11.3 Electrostatic discharge immunity test
- 11.4 Electrical fast transient burst immunity test
- 11.5 Surge (impact) immunity test
- 11.6 RF field immunity test conducted disturbances induced by
- 12 anti-shipping Environmental Impact Test
- 12.1 Effect of high temperature transport test
- 12.2 anti-impact test cryogenic transport
- 12.3 anti transport heat impact test
- 12.4 anti transport free drop impact test
- 13 special performance test certification
- 13.1 anti-corrosion and erosion performance test
- 13.2 7 explosion-proof performance test
- 13.3 Functional Safety Certification
- 15 long-running examination
- 16 7 Inspection Rules
- 16.1 type test
- 16.2 factory inspection
- 4 isolated DI channel resistance to common mode interference test circuits
1 Scope
This section GB/T 26804 specifies the digital input and output channels of the template inspection test methods and inspection rules.
This section applies to industrial control computer system for evaluating performance digital input output channel template.
2 Normative references
The following documents contain provisions which, through reference GB/T 26804 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 2423.4 Environmental testing for electric and electronic products Part 2. Test methods - Test Db Damp (12h 12h cycle
Ring) (GB/T 2423.4-2008, IEC 60068-2-30.2005, IDT)
GB/T 15479-1995 industrial automation instruments of insulation resistance, dielectric strength technical requirements and test methods
GB/T 17626.2 Electromagnetic compatibility Testing and measurement techniques - Electrostatic discharge immunity test (GB/T 17626.2-2006,
IEC 61000-4-2.2001, IDT)
GB/T 17626.3 electromagnetic compatibility test and measurement technology RFEMS test (GB/T 17626.3-
2006, IEC 61000-4-3.2002, IDT)
GB/T 17626.4 Electromagnetic compatibility Testing and measurement techniques - Electrical fast transient burst immunity test (GB/T 17626.4-
2008, IEC 61000-4-4.2004, IDT)
GB/T 17626.5 electromagnetic compatibility test and measurement technology surge (impact) immunity test (GB/T 17626.5-2008,
IEC 61000-4-5.2005, IDT)
GB/T 17626.6 Electromagnetic compatibility Testing and measurement techniques - conducted disturbances induced RF field immunity test (GB/T 17626.6-
2008, IEC 61000-4-6.2006, IDT)
GB/T 17626.8 Electromagnetic compatibility Testing and measurement techniques - Power frequency magnetic field immunity test (GB/T 17626.8-2006,
IEC 61000-4-8.2001, IDT)
GB/T 17626.11 Electromagnetic compatibility Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests (GB/T 17626.11-2008, IEC 61000-4-11.2004, IDT)
GB/T 18271.3-2000 Process measurement and control devices - General methods and procedures for evaluating performance - Part 3. effects of influence quantities
Test (idt IEC 61298-3.1998)
GB/T 26802.1-2011 industrial control computer system - Part 1 Generic specification. General requirements
GB/T 26804.5-2011 industrial control computer system function module template Part 5 digital input and output channels
General technical templates
3 Terms and Definitions
3.1 Definitions
GB/T 26802.1-2011 and GB/T 26804.5-2011 and established the following terms and definitions apply to this section.
GB/T 41251-2022 | GB/T 32828-2016 | DL/T 680-2015 | GB/T 26804.7-2017 | GB/T 26804.4-2011 | GB/T 26804.3-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 26804.6-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 26804.7-2017 — Industrial control computer system—Function module—Part 7: General technical conditions and evaluation methods for video capture module
GB/T 26804.5-2011 — Industrial control computer system - Function module - Part 5: General specification for digital input/output channel modules
GB/T 26804.4-2011 — Industrial control computer system - Function module - Part 4: Methods of evaluating the performance for analogue input/output channel module
Secure payment via Stripe
Payments accepted
GB/T 26804.6-2011
$195.00