GB/T 26804.5-2011Industrial control computer system - Function module - Part 5: General specification for digital input/output channel modules (English PDF)
工业控制计算机系统 功能模块模板 第5部分：数字量输入输出通道模板通用技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26804.5-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 29, 2011
Implementation date
December 1, 2011
Scope
GB/T 26804.5-2011 is the English-translated version of 工业控制计算机系统 功能模块模板 第5部分：数字量输入输出通道模板通用技术条件.
GB/T 26804.5-2011 is the Chinese standard "Industrial control computer system - Function module - Part 5: General specification for digital input/output channel modules".
Its scope clause reads: This section GB/T 26804 specifies the digital input and output channels of the template design requirements, technical requirements and product logos, packaging, Storage.
This section applies to industrial control computer system's digital input and output channel template. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 26804.5-2011
National Standard of the People's Republic of China
- ICS
- 25.040.40
- Classification
- N 18
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Definitions
- 3.2 Abbreviations
- 4 design requirements
- 4.1 Hardware design requirements
- 4.2 Software design requirements
- 4.3 Design Requirements
- 4.4 2 safety design requirements
- 4.5 Documentation Requirements
- 5 DI/DO channels templates Category
- 5.1 Category 2 according to the input and output signals
- 5.2 by Function
- 5.3 Category 2 according to the input and output capacity
- 6 3 Technical requirements
- 6.1 DI/DO channels templates
- 6.2 DI channel template basic performance
- 6.3 DO channel template basic performance
- 6.4 size and appearance of the structure
- 6.5 Power adaptability
- 6.6 common-mode immunity
- 6.7 Environmental Impact
- 6.8 EMC immunity
- 6.10 Special Features
- 6.12 long-running examination
- 7 signs, packaging, and storage instructions
- 7.1 marks
- 7.2 Packaging
- 7.3 Manual
- 7.4 Storage
1 Scope
This section GB/T 26804 specifies the digital input and output channels of the template design requirements, technical requirements and product logos, packaging,
Storage.
This section applies to industrial control computer system's digital input and output channel template.
2 Normative references
The following documents contain provisions which, through reference GB/T 26804 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 9969 General Instructions industrial products
GB/T 13384 mechanical and electrical products packaging General technical conditions
GB/T 15479-1995 industrial automation instruments of insulation resistance, dielectric strength technical requirements and test methods
GB/T 17214.3-2000 working conditions in industrial process measurement and control equipment Part 3. Mechanical influences (idt IEC 60654-
3. 1983)
GB/T 17626.4-2008 Electromagnetic compatibility - Testing and measurement techniques - Electrical fast transient burst immunity test (IEC 61000-
4-4.2004, IDT)
GB/T 17626.5-2008 Electromagnetic compatibility - Testing and measurement techniques - Surge (impact) immunity test (IEC 61000-4-5.
2005, IDT)
GB/T 17626.6-2008 Electromagnetic compatibility - Testing and measurement techniques - conducted disturbances induced by RF field immunity (IEC 61000-
4-6.2006, IDT)
GB/T 17626.8-2006 Electromagnetic compatibility - Testing and measurement techniques - Power frequency magnetic field immunity test (IEC 61000-4-8.2001,
IDT)
GB/T 26802.1-2011 industrial control computer system - Part 1 Generic specification. General requirements
3 Terms and Definitions
3.1 Definitions
GB/T 26802.1-2011 established, and the following terms and definitions apply to GB/T 26804 in this section.
3.1.1 Digital input and output channels template digitalI/Omodules
Will be converted with the corresponding parameter measurement and control switches, frequency, pulse and other input signals into digital signals that can be received by industrial control computer,
And/or general industrial control computer converts the digital signal into an output corresponding to the switching frequency of the pulse signal output from the functional unit (Referred to as the DI/DO channels templates).
GB/T 41251-2022 | GB/T 32828-2016 | DL/T 680-2015 | GB/T 26804.7-2017 | GB/T 26804.4-2011 | GB/T 26804.3-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 26804.5-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 26804.1-2011 — Industrial control computer system - Function module - Part 1: General specification for processor module
GB/T 26804.3-2011 — Industrial control computer system - Function module - Part 3: General specification for analogue input/output channel module
GB/T 26804.4-2011 — Industrial control computer system - Function module - Part 4: Methods of evaluating the performance for analogue input/output channel module
Secure payment via Stripe
Payments accepted
GB/T 26804.5-2011
$135.00