GB/T 26804.4-2011Industrial control computer system - Function module - Part 4: Methods of evaluating the performance for analogue input/output channel module (English PDF)
工业控制计算机系统 功能模块模板 第4部分：模拟量输入输出通道模板性能评定方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26804.4-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 29, 2011
Implementation date
December 1, 2011
Scope
GB/T 26804.4-2011 is the English-translated version of 工业控制计算机系统 功能模块模板 第4部分：模拟量输入输出通道模板性能评定方法.
GB/T 26804.4-2011 is the Chinese standard "Industrial control computer system - Function module - Part 4: Methods of evaluating the performance for analogue input/output channel module".
Its scope clause reads: This section GB/T 26804 provisions of industrial control computer system analog input and output channel template (hereinafter referred to as AI/AO Channel template) performance evaluation method, the main contents include test methods and inspection rules.
This section applies to industrial control computer system AI/AO channel template. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 26804.4-2011
National Standard of the People's Republic of China
- ICS
- 25.040.40
- Classification
- N 18
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Definitions
- 3.2 Abbreviations
- 4 Test conditions
- 4.2 Power Condition
- 4.3 Other Condition
- 4.4 Test preparations
- 5 AI channel function and basic performance test template
- 5.1 Basic function check
- 5.2 self-diagnostic function checks
- 5.3 The basic performance test
- 6 AO channel template functions and basic performance test
- 6.1 Basic function check
- 6.2 self-diagnostic function checks
- 6.3 The basic performance test
- 7 structure size and appearance inspection
- 7.1 Size of inspection
- 7.2 appearance inspection
- 8 Power adaptability test
- 8.1 supply voltage sag test
- 8.2 Effect of the supply voltage short interruptions Test
- 8.3 supply voltage variations affect the test
- 9 common mode immunity test series mode
- 9.1 common-mode immunity test
- 9.2 Immunity Test series mode
- 10 6 Environmental Impact test
- 10.1 Ambient Temperature Effect Test
- 10.2 Relative humidity test
- 10.3 Vibration Test
- 11 EMC immunity test
- 11.1 RFEMS Test
- 11.2 Power frequency magnetic field immunity test
- 11.3 electrostatic discharge test
- 11.4 Electrical fast transient burst immunity test
- 11.5 Surge (impact) immunity test
- 11.6 RF conducted disturbances induced immunity test
- 12 EMI Test
- 13 anti-environmental impacts of transportation test
- 13.1 Effect of high temperature transport test
- 13.2 anti-impact test cryogenic transport
- 13.3 anti transport heat impact test
- 13.4 anti transport free drop impact test
- 14 special performance test
- 14.1 anti-corrosion and erosion performance test
- 14.2 Explosion test
- 14.3 Security Inspection
- 15 7 Reliability Test
- 16 long-running examination
- 17 7 Inspection Rules
- 17.1 type test conditions
- 17.2 factory inspection
- 17.3 random inspection
1 Scope
This section GB/T 26804 provisions of industrial control computer system analog input and output channel template (hereinafter referred to as AI/AO Channel template) performance evaluation method, the main contents include test methods and inspection rules.
This section applies to industrial control computer system AI/AO channel template.
2 Normative references
The following documents contain provisions which, through reference GB/T 26804 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 15479 Industrial Automation Instrumentation insulation resistance, dielectric strength technical requirements and test methods
GB/T 17212-1998 industrial process measurement and control - Terms and definitions (idt IEC 902. 1987)
GB/T 17626.2 Electromagnetic compatibility Testing and measurement techniques - Electrostatic discharge immunity test (GB/T 17626.2-2006,
IEC 61000-4-2.2001, IDT)
GB/T 17626.3-2006 Electromagnetic compatibility - Testing and measurement techniques RFEMS test (IEC 61000-4-
3.2002, IDT)
GB/T 17626.4-2008 Electromagnetic compatibility - Testing and measurement techniques - Electrical fast transient burst immunity test (IEC 61000-
4-4.2005, IDT)
GB/T 17626.5-2008 Electromagnetic compatibility - Testing and measurement techniques - Surge (impact) immunity test (IEC 61000-4-5.
2005, IDT)
GB/T 17626.6-2008 Electromagnetic compatibility - Testing and measurement techniques - conducted disturbances induced by RF field immunity (IEC 61000-
4-6.2006, IDT)
GB/T 17626.8-2006 Electromagnetic compatibility - Testing and measurement techniques - Power frequency magnetic field immunity test (IEC 61000-4-8.2001,
IDT)
GB/T 17626.11-2008 Electromagnetic compatibility Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity
Test (IEC 61000-4-11.2004, IDT)
GB/T 18271.3-2000 Process measurement and control devices - General methods and procedures for evaluating performance - Part 3. effects of influence quantities
Test (idt IEC 61298-3.1998)
GB/T 26804.3-2011 industrial control computer system function module template - Part 3. analog input and output channels mode
General technical board
JB/T 9329-1999 instrumentation transportation, transportation, storage and basic environmental conditions and test methods
3 Terms and Definitions
3.1 Definitions
Terms and definitions GB/T 17212-1998 and GB/T 26804.3-2011 established applicable to this section.
GB/T 41251-2022 | GB/T 32828-2016 | DL/T 680-2015 | GB/T 26804.7-2017 | GB/T 26804.5-2011 | GB/T 26804.3-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 26804.4-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 26804.1-2011 — Industrial control computer system - Function module - Part 1: General specification for processor module
GB/T 26804.3-2011 — Industrial control computer system - Function module - Part 3: General specification for analogue input/output channel module
GB/T 26804.5-2011 — Industrial control computer system - Function module - Part 5: General specification for digital input/output channel modules
Secure payment via Stripe
Payments accepted
GB/T 26804.4-2011
$195.00