Valid

GB/T 26804.3-2011Industrial control computer system - Function module - Part 3: General specification for analogue input/output channel module (English PDF)

工业控制计算机系统功能模块模板第3部分：模拟量输入输出通道模板通用技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 26804.3-2011 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 29, 2011

Implementation date

December 1, 2011

Scope

GB/T 26804.3-2011 is the English-translated version of 工业控制计算机系统功能模块模板第3部分：模拟量输入输出通道模板通用技术条件.

GB/T 26804.3-2011 is the Chinese standard "Industrial control computer system - Function module - Part 3: General specification for analogue input/output channel module".

Its scope clause reads: This section GB/T 26804 provisions of industrial control computer system analog input and output channels of the template general technical conditions, The main contents include normative references, terminology, design requirements, technical requirements, labeling, packaging and storage.

This section applies to industrial control computer system for analog input and output channels templates. Its clauses include terms and definitions, abbreviations.

Found what you need?

Document preview — GB/T 26804.3-2011

National Standard of the People's Republic of China

ICS: 25.040.40
Classification: N 18

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

1 Scope
2 Normative references
3 Terms and definitions, abbreviations
3.1 Terms and definitions
3.2 Abbreviations
4 design requirements
4.1 Hardware design requirements
4.2 Software design requirements
4.3 Design Requirements
4.4 2 safety design requirements
4.5 Documentation Requirements
5 AI/AO channel template Category
5.1 Category 2 according to the input and output signals
5.2 Category 2 according to the input and output functions
6 2 Technical Requirements
6.1 AI/AO channel templates
6.2 AI channel template basic performance
6.3 AO channel template basic performance
6.4 size and appearance of the structure
6.5 Power adaptability
6.6 common mode, series mode immunity
6.7 Environmental Impact
6.8 EMC immunity
6.9 Electromagnetic Interference
6.10 6 anti-environmental impact of transport
6.11 Special Features
6.13 long-running examination
7 signs, packaging, and storage instructions
7.1 marks
7.2 Packaging
7.3 Manual
7.4 Storage

1 Scope

This section GB/T 26804 provisions of industrial control computer system analog input and output channels of the template general technical conditions,

The main contents include normative references, terminology, design requirements, technical requirements, labeling, packaging and storage.

This section applies to industrial control computer system for analog input and output channels templates.

2 Normative references

The following documents contain provisions which, through reference GB/T 26804 in this section constitute provisions of this section. For dated reference documents

Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section

Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.

GB/T 9969 General Instructions industrial products

GB/T 13384 mechanical and electrical products packaging General technical conditions

GB/T 15479-1995 industrial automation instruments of insulation resistance, dielectric strength technical requirements and test methods

GB/T 17214.3-2000 working conditions in industrial process measurement and control equipment Part 3. Mechanical influences (idt IEC 60654-

3. 1983)

GB/T 17626.2-2006 Electromagnetic compatibility - Testing and measurement techniques - Electrostatic discharge immunity test (IEC 61000-4-2.2001,

IDT)

GB/T 17626.4-2008 Electromagnetic compatibility - Testing and measurement techniques - Electrical fast transient burst immunity test (IEC 61000-

4-4.2004, IDT)

GB/T 17626.5-2008 Electromagnetic compatibility - Testing and measurement techniques - Surge (impact) immunity test (IEC 61000-4-5.

2005, IDT)

GB/T 17626.6-2008 Electromagnetic compatibility - Testing and measurement techniques - conducted disturbances induced by RF field immunity (IEC 61000-

4-6.2006, IDT)

GB/T 17626.8-2006 Electromagnetic compatibility - Testing and measurement techniques - Power frequency magnetic field immunity test (IEC 61000-4-8.2001, IDT)

GB/T 26802.1-2011 industrial control computer system - Part 1 Generic specification. General requirements

3 Terms and definitions, abbreviations

3.1 Terms and Definitions

GB/T 26802.1-2011 established, and the following terms and definitions apply to GB/T 26804 in this section.

3.1.1 Analog analogue

Continuously changing electrical signal over time.

3.1.2 Analog input channels

Will be converted into an analog channel computer can receive the signal.

GB/T 41251-2022 | GB/T 32828-2016 | DL/T 680-2015 | GB/T 26804.7-2017 | GB/T 26804.5-2011 | GB/T 26804.4-2011 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

GB/T 47230-2026|GB/T 47278-2026|GB/T 47695-2026|GB/T 45283.1-2025|GB/T 45283.2-2025|GB/T 45507-2025

How to Download GB/T 26804.3-2011

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.