GB/T 26700-2011Rigid polyurethane (PUR) cellular plastics used for doors filling (English PDF)
门体填充用硬质聚氨酯泡沫塑料
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26700-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 16, 2011
Implementation date
December 1, 2011
Scope
GB/T 26700-2011 is the English-translated version of 门体填充用硬质聚氨酯泡沫塑料.
GB/T 26700-2011 is the Chinese standard "Rigid polyurethane (PUR) cellular plastics used for doors filling". Its scope clause reads: This standard specifies the door filled with rigid polyurethane foam of classification, requirements, test methods and inspection rules.
This standard applies to polyol with a polyisocyanate as the main raw material for preparing the foam used to fill the security door, security door, entrance door, Garage doors and other door and similar uses rigid polyurethane foam.
This standard does not apply to the primary purpose of holding the door with a rigid polyurethane foam (such as cold storage doors, etc.). Its clauses include requirements.
Found what you need?
Document preview — GB/T 26700-2011
National Standard of the People's Republic of China
- ICS
- 83.100
- Classification
- G 30
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
1 Scope
This standard specifies the door filled with rigid polyurethane foam of classification, requirements, test methods and inspection rules.
This standard applies to polyol with a polyisocyanate as the main raw material for preparing the foam used to fill the security door, security door, entrance door,
Garage doors and other door and similar uses rigid polyurethane foam.
This standard does not apply to the primary purpose of holding the door with a rigid polyurethane foam (such as cold storage doors, etc.).
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 2918-1998 plastic sample conditioning and testing of the standard environment
GB/T 6343-2009 foam and rubber Determination of apparent density
GB/T 8811-2008 rigid foam dimensional stability test methods
Measuring performance GB/T 8813-2008 rigid foam compression
GB/T 10294-2008 steady insulation resistance and related properties - Guarded hot plate method
GB/T 10295-2008 steady insulation resistance and related properties - Heat flow meter
Determination of GB/T 10799-2008 rigid foam volume percentage of open and closed cells
GB J88-1985 standing wave tube sound absorption coefficient and acoustic impedance measurement specification
Category 3
Products by the foaming process divided into two categories.
--- I categories. foam front, which is to be rigid polyurethane foam blowing door body, after spraying paint and baking;
--- II class. After foaming, which is to paint spraying and baking, after rigid polyurethane foam blowing door body.
4 Requirements
Physical and mechanical properties 4.1 products should meet the requirements of Table 1.
Table 1 Physical and Mechanical Properties
Project Unit
Performance
I Class II Class
The apparent core density a <= kg/m3 25.0 40.0
Compressive strength or compressive stress by 10% deformation when >= kPa 50 100
Thermal conductivity <= W/(m · K) 0.038 0.027
Opening ratio >=% 80 -
Noise reduction coefficient b >= - 0.3 -
GB/T 24370-2021 | GB/T 24128-2018 | GB/T 25277-2010 | GB/Z 37664.3-2025 | GB/Z 37664.2-2025 | GB/T 26689-2024 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 26700-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 26700-2011
$85.00