GB/T 26696-2011Polymer board for furniture (English PDF)
家具用高分子材料台面板
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26696-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 16, 2011
Implementation date
December 1, 2011
Scope
GB/T 26696-2011 is the English-translated version of 家具用高分子材料台面板.
GB/T 26696-2011 is the Chinese standard "Polymer board for furniture". Its scope clause reads: This standard specifies the terms and definitions furniture pretreatment polymer materials Taiwan panel specimen conditions, requirements, test methods.
This standard applies to polymer materials for furniture countertops. Its clauses include terms and definitions; specimen pretreatment conditions; requirements.
Found what you need?
Document preview — GB/T 26696-2011
National Standard of the People's Republic of China
- ICS
- 97.140
- Classification
- Y 82
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 1 specimen pretreatment conditions
- 5 requires
- 6 Test Method
1 Scope
This standard specifies the terms and definitions furniture pretreatment polymer materials Taiwan panel specimen conditions, requirements, test methods.
This standard applies to polymer materials for furniture countertops.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 15102-2006 impregnated paper veneer plywood
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Methyl methacrylate (MMA) or unsaturated polyester resin (UPR), or an epoxy resin (EP) as the matrix, the powder (such as aluminum hydroxide,
Calcium carbonate, silica, etc.) as fillers, pigments and other adjuvants, by casting molding, vacuum model, molding for furniture
Polymer composite material.
3.2 Packing filer
To improve the processing properties of polymer materials Countertops, product mechanical properties of solid materials.
4 specimen pretreatment conditions
Can only be Unless otherwise specified, the specimen shall be at a temperature of (20 ± 2) °C, relative humidity of 60% to 70% of the conditions placed after 48h test.
5 Requirements
5.1 size requirements
5.1.1
Product dimensions shall comply with the labeling requirements express a thickness tolerance ± 2mm.
5.1.2
Edge straightness should be less than 0.5mm.
5.1.3
flatness should be less than 0.2mm.
5.1.4
Edge verticality should be less than 0.5mm.
5.2 Physical and Chemical Properties
Shall comply with the provisions in Table 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 26696-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 26696-2011
$295.00