GB/T 26630-2011Good manufacturing practice for rice processing enterprise (English PDF)
大米加工企业良好操作规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26630-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 16, 2011
Implementation date
November 1, 2011
Scope
GB/T 26630-2011 is the English-translated version of 大米加工企业良好操作规范.
GB/T 26630-2011 is the Chinese standard "Good manufacturing practice for rice processing enterprise".
Its scope clause reads: This standard specifies the rice processing enterprises factory environment, plant facilities, machinery and equipment, organization and personnel management, health management, production process Basic requirements management, quality control, labeling and the establishment of management systems assessment and good operation.
This standard applies to rice (including parboiled rice, sprouted brown rice, fortified rice, etc.) processing enterprises. Its clauses include terms and definitions; factory environment; plant facilities.
Found what you need?
Document preview — GB/T 26630-2011
National Standard of the People's Republic of China
- ICS
- 67.040
- Classification
- X 01
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Factory environment
- 5 plant facilities
1 Scope
This standard specifies the rice processing enterprises factory environment, plant facilities, machinery and equipment, organization and personnel management, health management, production process
Basic requirements management, quality control, labeling and the establishment of management systems assessment and good operation.
This standard applies to rice (including parboiled rice, sprouted brown rice, fortified rice, etc.) processing enterprises.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB 5749 drinking water health standards
GB 7718 pre-packaged food labels General
GB 8978 Integrated Wastewater Discharge Standard
GB 13271 boiler air pollutant emission standards
GB/T 13277 ships with compressed air quality classes
GB 14881 food companies General hygienic practices
GB 14930.1 food tools and detergent hygiene standards
GB/T 15091 food industry basic terminology
GB 15179 Food Machinery Grease
GB/T 17109 Food sales package
GB/T 22515 OILS terminology grain, oil and processed products
3 Terms and Definitions
Terms and definitions GB/T 22515 and GB/T 15091 apply to this standard established.
4 Factory environment
4.1
potential field around the plant should not have dust, harmful gases, radioactive substances and other diffusion sources, may not have a lot of insect breeding
The. Plant the surrounding environment should be kept clean, the floor may not have serious water, muddy, dirty, etc., roads, open space should be concrete and other hard
Laying material, to prevent dust and water.
4.2
fences around the plant should be set up, in part at least 30cm from the ground should be sealed construction material.
4.3
plant in the region may not have adverse odors, harmful gases, soot or other health hazards in the facility.
4.3.1
factory district prohibits the keeping of animals.
4.3.2
Plant drainage system should be kept smooth, there should be no serious water leakage, silt or contamination.
4.3.3
Living Area shall be separated from production areas. Production areas should be under the direction of the living area.
4.3.4
Production areas should be non-smoking.
5 plant facilities
5.1 Design
New construction, expansion, renovation design and construction of the project, shall comply with the requirements of the standard.
GB/T 43812-2024 | GB/T 29471-2020 | SN/T 3644-2013 | GB/T 17237-2026 | GB/T 26629-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 26630-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 26630-2011
$195.00