GB/T 26556-2011Generic specification for online leak sealing sealant of pressure equipment (English PDF)
承压设备带压密封剂技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26556-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 16, 2011
Implementation date
December 1, 2011
Scope
GB/T 26556-2011 is the English-translated version of 承压设备带压密封剂技术条件.
GB/T 26556-2011 is the Chinese standard "Generic specification for online leak sealing sealant of pressure equipment".
Its scope clause reads: This standard specifies requirements for pressurized sealant, inspection rules, test methods, marking, packaging, transportation, storage and sealing construction selection The method of using the principles and injection agent operation.
This standard applies to all kinds of pressure sealing with the sealant. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 26556-2011
National Standard of the People's Republic of China
- ICS
- 23.020.30
- Classification
- J 74
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Sealing
- 3.2 Sealants
- 3.3 Injecting sealants
- 3.4 Fastening sealant
- 3.5 The initial injection pressure
- 3.6 Thermal curing heatingcure
- 3.7 Curing temperature
1 Scope
This standard specifies requirements for pressurized sealant, inspection rules, test methods, marking, packaging, transportation, storage and sealing construction selection
The method of using the principles and injection agent operation.
This standard applies to all kinds of pressure sealing with the sealant.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (excluding corrigenda) or revisions do not apply to this standard, however, encourage the parties to study whether according to the agreement
You can use the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 1690 vulcanized rubber or thermoplastic rubber Test method for resistance to liquids
GB/T 14837 Rubber and rubber products - Determination of composition thermal gravimetric analysis
GB/T 16584 Determination of rubber vulcanization characteristics with no rotor rheometer
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1 Sealing
In the fluid medium leaking state, effectively sealing techniques.
3.2 Sealants
Pressure collectively sealing technology used special sealing material. Including injecting sealants and fastening sealant.
3.3 Injecting sealants
For "injection gun" Injecting a general term used composite sealing material.
3.4 Fastening sealant
For fastening a special sealing method using the sealing material under pressure.
3.5 The initial injection pressure
Indicates injecting sealants rheology degree of difficulty of the technical indicators, the unit is MPa.
3.6 Thermal curing heatingcure
Sealants chemical reaction by absorbing heat from the plastic body is converted into an elastomer in the process.
3.7 Curing temperature
A plastic body sealant into the lowest temperature of the elastomer.
GB/T 24159-2022 | GB/T 24160-2022 | GB/T 24162-2022 | GB/T 32566.1-2026 | GB/T 20663-2026 | GB/T 17878-2026 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 26556-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 26556-2011
$105.00