GB/T 26428-2010Method for determination of Bacillus subtilis in feeds (English PDF)
饲用微生物制剂中枯草芽孢杆菌的检测
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26428-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
January 14, 2011
Implementation date
July 1, 2011
Scope
GB/T 26428-2010 is the English-translated version of 饲用微生物制剂中枯草芽孢杆菌的检测.
GB/T 26428-2010 is the Chinese standard "Method for determination of Bacillus subtilis in feeds". Its scope clause reads: This standard specifies the test method for Bacillus subtilis in feed microbial preparations.
This standard applies to the detection and counting of Bacillus subtilis in feed microbial preparations. Its clauses include diluent, culture medium and reagents; equipment and glassware; sampling; sample preparation; operating steps; result calculation and reporting.
It was issued by the General Administration of Quality Supervision, Inspection and Quarantine on JANUARY 14, 2011 and took effect on JULY 1, 2011.
Found what you need?
Document preview — GB/T 26428-2010
National Standard of the People's Republic of China
- ICS
- 65.120
- Classification
- B 46
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword3
- 1 Scope4
- 2 Normative references4
- 3 Diluent, culture medium and reagents4
- 4 Equipment and glassware5
- 5 Sampling5
- 6 Sample preparation5
- 7 Operating steps5
- 8 Result calculation and reporting9
- Appendix A (Informative) Culture media and reagents11
1 Scope
This standard specifies the test method for Bacillus subtilis in feed microbial preparations.
This standard applies to the detection and counting of Bacillus subtilis in feed microbial preparations.
2 Normative references
The following documents are essential for the application of this document. For any dated reference, only the version corresponding to that date applies to this document; for any undated reference, the latest version (including all amendments) applies to this document.
GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values
GB/T 14699.1 Animal Feeding Stuffs - Sampling (GB/T 14699.1-2005, ISO 6497:2002, IDT)
GB/T 20195 Animal feeding stuffs - Preparation of test samples (GB/T 20195-2006, ISO 6498:1998, IDT)
3 Diluent, culture medium and reagents
Unless otherwise specified, only reagents confirmed to be of analytical grade shall be used in the analysis, and distilled or deionized water or water of equivalent purity shall be used in the laboratory.
3.1 0.85% sterile physiological saline.
3.4 7% sodium chloride growth medium. See A.3 in Appendix A.
3.5 V-P test medium and reagents. See A.4 in Appendix A.
3.8 Propionate utilization medium. See A.7 in Appendix
3.7 D-Mannitol Fermentation Medium. See A.6 in Appendix
3.6 Nitrate reduction medium and reagents. See Appendix A, A.5
3.3 Gram staining solution. See A.2 in Appendix A
3.2 Nutrient agar (NA) medium. See A.1 in Appendix
4 Equipment and glassware
In addition to commonly used microbiology laboratory equipment, other equipment and glassware are as follows.
4.2 pH meter. with an accuracy of ±0.1 unit.
4.4 Graduated pipettes. The marked volumes are 1 mL and 10 mL, with the minimum graduations being 0.1 mL and 0.5 mL, respectively.
4.1 Constant temperature incubator. 37 °C±1 °C
4.3 Glass or plastic petri dishes
4.5 Glass or plastic spreader
4.6 Microscope. 1000x
5 Sampling
Laboratory samples shall be authentic and representative. Sampling tools, such as shovels, spoons, samplers, test tubes, wide-mouth bottles, and scissors, shall be sterilized.
Samples shall be delivered to the microbiology laboratory as soon as possible. The number of samples and the sampling method shall be in accordance with GB/T 14699.1.
6 Sample preparation
Samples shall be prepared in accordance with GB/T 20195, and shall be tested as soon as possible after preparation.
7 Operating steps
7.1 Sample preparation, initial suspension and tenfold dilution
Weigh 25 g (mL) of the sample aseptically, add 225 mL of 0.85% sterile physiological saline, and homogenize for 1~2 min to prepare an initial suspension of 1.10. Take 1 mL of the 1.10 initial suspension, add 9 mL of 0.85% sterile physiological saline, and mix thoroughly to prepare a 1.100 dilution. Perform further serial dilutions of 10-fold based on the bacterial content of the sample.
7.2 Inoculation and culture
Choose 2~3 suitable dilutions, incubate in a water bath at 80 °C±1 °C for 10 min, and use a sterile pipette to aspirate 0.1 mL onto two nutrient agar plates (3.2). Carefully and quickly spread the inoculum onto the agar surface using a spreader, ensuring the spreader does not touch the edge of the plate. Use one sterile spreader per plate. Cover the coated plate and incubate at room temperature for 15 min to allow the inoculum to be completely absorbed. Invert the above plates and incubate at 37 °C±1 °C for 48 h±2 h.
7.3 Colony counting and screening
After culturing, select plates with colony counts of 30~300 for counting. Plates with large, sheet-like colonies should not be used; if the sheet-like colonies cover less than half the plate, but the remaining half is evenly distributed, the count of half a plate can be multiplied by 2 to represent the total colony count of the plate. Typical Bacillus subtilis colonies have a rough, opaque, and non-glossy surface, with expanded edges, and are round or spread into wavy or irregular shapes, and are grayish-white or slightly yellow. Then, select 5 characteristic colonies for confirmatory testing.
7.4 Confirmatory test
7.4.1 Overview
Currently available commercial biochemical identification kits or tubes, if using the same culture medium as that used in this standard's confirmatory test, can be used to perform this confirmatory test according to the product instructions.
7.4.2 Strain preparation
Single colonies are picked from the plates and streaked onto nutrient agar plates, incubated at 37 °C±1 °C for 48 h±2 h. At least one well-isolated characteristic colony is selected from each plate, sub-cultured and preserved, and used for confirmatory testing.
7.4.3 Morphological observation
Selected and purified colonies are Gram-stained (3.3) and examined under a microscope.
Bacillus subtilis cells shall be rod-shaped with spores; spores shall be oval, central or near-central, and sporangia shall not be obviously enlarged.
7.4.4 Physiological and biochemical confirmatory tests
The selected and purified colonies are subjected to experiments including growth in 7% sodium chloride (3.4), V-P test (3.5), nitrate reduction (3.6), D-mannitol fermentation (3.7), and propionate utilization (3.8).
7.4.5 Confirmation results
If the following characteristics are met, it can be determined as Bacillus subtilis. The colonies have a rough, opaque surface, are grayish-white or slightly yellow, and consist of rod-shaped cells with spores. The spores are oval, centrally or nearly centrally located, and the sporangia are not significantly enlarged. It grows in 7% sodium chloride, is positive for V-P testing, and is positive for nitrate reduction. It can produce acid from D-mannitol, but does not utilize propionate. The distinguishing characteristics of Bacillus subtilis from similar Bacillus species are shown in Table 1. […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 26428-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 26428-2010
$195.00