GB/T 26415-2010Dysprosium-Iron alloy (English PDF)
镝铁合金
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26415-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
January 14, 2011
Implementation date
November 1, 2011
Scope
GB/T 26415-2010 is the English-translated version of 镝铁合金.
GB/T 26415-2010 is the Chinese standard "Dysprosium-Iron alloy". Its scope clause reads: This standard specifies the Dy alloy requirements, test methods, inspection rules and signs, packaging, transportation and storage.
This standard applies to electrolysis, fused with the method of production, for the production of NdFeB, terbium, dysprosium iron magnetostrictive materials, rare earth functional materials Dy alloy material used. Its clauses include requirements.
Found what you need?
Document preview — GB/T 26415-2010
National Standard of the People's Republic of China
- ICS
- 77.120.99
- Classification
- H 65
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Requirements
- 3.1 Chemical composition
- 3.2 Appearance
1 Scope
This standard specifies the Dy alloy requirements, test methods, inspection rules and signs, packaging, transportation and storage.
This standard applies to electrolysis, fused with the method of production, for the production of NdFeB, terbium, dysprosium iron magnetostrictive materials, rare earth functional materials
Dy alloy material used.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 8170 repair value expressed about the rules and limit values and judgment
GB/T 26416 (all parts) Dy alloy chemical analysis method
3 Requirements
3.1 Chemical composition
Dy alloy chemical composition shall be in accordance with Table 1. Demand side, such products have special requirements, supply and demand sides can be negotiated, and in close
The same note.
Table 1 product
Trademark
Chemical composition (mass fraction) /%
RE Fe
Dy/RE not less than
Impurity content of not more than
Rare earth impurities/RE Non-rare earth impurities
C Si Ca Al Mg Ni O
105085 85.0 ± 1.0 margin 99.5 0.5 0.05 0.05 0.03 0.05 0.03 0.03 0.1
105080 80.0 ± 1.0 margin 99.5 0.5 0.05 0.05 0.03 0.05 0.03 0.03 0.1
105075 75.0 ± 1.0 margin 99.5 0.5 0.05 0.05 0.03 0.05 0.03 0.03 0.1
3.2 Appearance
3.2.1
Products for the cast alloy.
3.2.2
Products and fracture surface showed a silver-white, should be clean, no visible inclusions and oxide powder off.
Test Method 4
Analysis of the chemical composition according to the provisions of GB/T 26416 were 4.1 products.
4.2
rounding off according to the provisions of GB/T 8170 will be.
GB/T 20892-2020 | GB/T 20168-2017 | GB/T 20169-2015 | GB/T 26414-2010 | GB/T 26413-2010 | GB/T 26412-2010 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 26415-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 26415-2010
$85.00