GB/T 26414-2010Gadolinium-Magnesium alloy (English PDF)
钆镁合金
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26414-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
January 14, 2011
Implementation date
November 1, 2011
Scope
GB/T 26414-2010 is the English-translated version of 钆镁合金.
GB/T 26414-2010 is the Chinese standard "Gadolinium-Magnesium alloy". Its scope clause reads: This standard specifies the requirements, test methods, inspection rules and signs, packaging, transportation and storage of gadolinium magnesium alloy.
This standard applies to electrolysis, fused with the law and the reduction of production, made for magnesium automotive engine additives, such as magnesium alloy and high temperature with gadolinium alloy. Its clauses include requirements.
Found what you need?
Document preview — GB/T 26414-2010
National Standard of the People's Republic of China
- ICS
- 77.120.99
- Classification
- H 65
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Requirements
- 3.1 Chemical composition
- 3.2 Appearance
1 Scope
This standard specifies the requirements, test methods, inspection rules and signs, packaging, transportation and storage of gadolinium magnesium alloy.
This standard applies to electrolysis, fused with the law and the reduction of production, made for magnesium automotive engine additives, such as magnesium alloy and high temperature with gadolinium alloy.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 8170 repair value expressed about the rules and limit values and judgment
3 Requirements
3.1 Chemical composition
Gadolinium magnesium alloy chemical composition shall comply with the requirements of Table 1. Demand side, such products have special requirements, both parties can agree otherwise.
Table 1 product
Trademark
Chemical composition (mass fraction) /%
RE Mg
Gd/RE not less than
Impurity content of not more than
Rare earth impurities/RE Non-rare earth impurities
Si Fe Al Ca Cu Ni CO 085085A 85 ± 2 margin 99.9 0.1 0.02 0.10 0.10 0.05 0.03 0.01 0.05 0.1
085085B 85 ± 2 margin 99.5 0.5 0.05 0.20 0.10 0.10 0.05 0.05 0.08 0.1
085075A 75 ± 2 Balance 99.9 0.1 0.02 0.10 0.10 0.05 0.03 0.01 0.05 0.1
085075B 75 ± 2 Balance 99.5 0.5 0.05 0.20 0.10 0.10 0.05 0.05 0.08 0.1
085030A 30 ± 2 margin 99.9 0.1 0.02 0.10 0.02 0.05 0.03 0.01 0.03 0.05
085030B 30 ± 2 balance 99.5 0.05 0.5 0.20 0.05 0.10 0.05 0.05 0.05 0.05
085025A 25 ± 2 margin 99.9 0.1 0.02 0.10 0.02 0.05 0.03 0.01 0.03 0.05
085025B 25 ± 2 balance 99.5 0.05 0.5 0.20 0.05 0.10 0.05 0.05 0.05 0.05
085020A 20 ± 2 margin 99.9 0.1 0.02 0.10 0.02 0.05 0.03 0.01 0.03 0.05
085020B 20 ± 2 balance 99.5 0.05 0.5 0.20 0.05 0.10 0.05 0.05 0.05 0.05
3.2 Appearance
3.2.1
Products for the cast alloy.
GB/T 20892-2020 | GB/T 20168-2017 | GB/T 20169-2015 | GB/T 26415-2010 | GB/T 26413-2010 | GB/T 26412-2010 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 26414-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 26414-2010
$165.00