GB/T 26342-2024International body transfer—Coffin (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting is required.

This document replaces GB/T 26342-2010 "International wooden coffins for the transport of human remains". Compared with GB/T 26342-2010, in addition to the structural adjustment In addition to editorial changes, the main technical changes are as follows.

--Changed the "Scope" chapter (see Chapter 1, Chapter 1 of the 2020 edition);

-- The term and definition of "International Transport of Corpses" (see Chapter 3 of the 2010 edition) have been deleted, and the terms "coffin lid", "coffin body", "panel", and "side panel" have been added.

5 terms and definitions including “handle” (see Chapter 3);

-- Deleted the material requirements (see 5.3 of the 2010 edition);

-- Deleted the appearance requirements for single board, plastic veneer, carving and branding (see 5.4.1.3 and 5.4.1.7 of the 2010 edition);

--The main dimensions and tolerances have been changed (see 4.2, 5.1 of the 2010 edition);

--Added content on load-bearing capacity, airtightness, environmental protection requirements, and weather resistance of coffins for international transfer of remains (see 4.3, 4.7, 4.9). and 4.10);

--Added the method for determining the limits of hazardous substances (see 5.9);

--Added product certificates, packaging, storage and transportation diagrams and labels (see 7.3 and 7.4).

Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.

This document is issued by the Ministry of Civil Affairs of the People's Republic of China.

This document is under the jurisdiction of the National Technical Committee for Standardization of Funeral and Interment (SAC/TC 354).

This document was drafted by: Gu'an County Minchuang Anticorrosion Technology Co., Ltd., Shanxi Linyi Lacquerware Craft Co., Ltd., Beijing Minchuang Tiandi Technology Co., Ltd., Xiamen Kaimu Management Consulting Co., Ltd., and China Funeral Association.

The main drafters of this document are: Sun Chaoying, Liu Kemin, Wen Xihua, Liang Qiangqiang, Sun Jiepeng, Sun Shuren, Wang Lishuan, Zeng Weipeng, and Kang Yuting.

The previous versions of this document and the documents it replaces are as follows.

--First published in 2010 as GB/T 26342-2010; --This is the first revision.

International transfer of coffins

1 Scope

This document specifies the technical requirements, inspection rules, marking, packaging, transportation and storage of coffins for international transfer of remains.

Experimental methods for transporting coffins for remains.

This document applies to the design, production, testing and acceptance of coffins for international transfer of remains.

2 Normative references

GB/T 191

GB/T 1634.1

GB/T 3324

GB/T 3325

GB/T 4857.20

GB/T 10357.1

GB/T 17344

GB/T 18584

3 Terms and Definitions

The following terms and definitions apply to this document.