GB/T 26286-2010Current-carrying copper profiled plate for electrolysis (English PDF)
电解用异型导电铜板
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26286-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
January 14, 2011
Implementation date
November 1, 2011
Scope
GB/T 26286-2010 is the English-translated version of 电解用异型导电铜板.
GB/T 26286-2010 is the Chinese standard "Current-carrying copper profiled plate for electrolysis".
Its scope clause reads: This standard specifies the electrolytic shaped conductive copper (hereinafter referred to as sheet) requirements, test methods, inspection rules and signs, packaging, transportation Transport, storage, quality certificates and contracts (or orders) and so on.
This standard applies to electrolysis industry Room profiled groove and the groove side conductive copper. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 26286-2010
National Standard of the People's Republic of China
- ICS
- 77.150.30
- Classification
- H 62
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Parallelism tolerance
1 Scope
This standard specifies the electrolytic shaped conductive copper (hereinafter referred to as sheet) requirements, test methods, inspection rules and signs, packaging, transportation
Transport, storage, quality certificates and contracts (or orders) and so on.
This standard applies to electrolysis industry Room profiled groove and the groove side conductive copper.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 228-2002 metallic materials at room temperature tensile test method
GB/T 351 metal material resistivity measurement method
GB/T 5121 (all parts) of copper and copper alloys -
GB/T 5231 Wrought copper and copper alloy chemical composition and shape of the product
GB/T 8888 heavy non-ferrous metal processing products, packaging, labeling, transportation and storage
GB/T 26303.3 copper and copper alloy processing material Dimensions detection methods - Part 3. plate and strip
3 Terms and Definitions
The following terms and definitions for use in the present standard.
3.1 Parallelism tolerance
Tolerance zone is the distance tolerance value t, and parallel to the plane of the area between the two parallel reference plane. see picture 1.
[GB/T 1182-1996, defined 18.7.4]
Figure 1 Figure 2 application parallelism tolerance parallelism tolerance example
NOTE. The standard application parallelism tolerance Example. parallelism t A side and C side is 3mm, indicating that the A side of the reference plane, C plane of the measured surface, C the surface
There measured points must be located at a distance of 3mm tolerance value between two parallel and parallel to the plane A plane, shown in Figure 2.
GB/T 27671-2023 | GB/T 26017-2020 | GB/T 26302-2020 | GB/T 13588-2026 | GB/T 26291-2020 | GB/T 26290-2010 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 26286-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 26286-2010
$225.00