GB/T 26270-2010Standard test signals for digital television receiving equipment (English PDF)
数字电视接收设备标准测试信号
This is a limited preview
Buy now to download the full PDF (35 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26270-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
January 14, 2011
Implementation date
June 1, 2011
Scope
GB/T 26270-2010 is the English-translated version of 数字电视接收设备标准测试信号.
GB/T 26270-2010 is the Chinese standard "Standard test signals for digital television receiving equipment". Its scope clause reads: This standard specifies the standard test signals for digital television receivers used for testing.
This standard applies to our terrestrial, cable and satellite digital TV broadcast receiving equipment testing. Digital TV projection displays and projectors Corresponding test signal can be implemented by reference. Its clauses include terms and definitions, abbreviations.
Found what you need?
Document preview — GB/T 26270-2010
National Standard of the People's Republic of China
- ICS
- 33.160.25
- Classification
- M 74
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions, abbreviations
- 3.1 Terms and definitions
- 3.2 Abbreviations
- 4 3 General requirements
- 4.1 digital video test signal
- 4.2 Digital audio test signal
- 4.3 Digital video elementary stream
- 4.4 digital audio elementary stream
- 4.5 4 transport stream
- 4.6 Business Information Flow
- 5 video test signal
- 5.1 Overview
- 5.2 Test Compound
- 5.3 7 color bar signal
- 5.4 brightness variable all-white field, all gray and black farm field signal
- 5.5 Limit eight gradation signal
- 5.6 white window signal
- 5.7 black window signal
- 5.8 10 black and white window signal
- 5.9 checkerboard signal
- 5.10 Graphics and white grid pattern signal 12 Haig
- 5.11 12 signal lines and windows
- 5.12 composite sine wave signal
- 5.14 sweep
- 5.15 2T pulse and bar signal
- 5.16 50Hz horizontal bar signal
- 5.17 ladder and signal average picture level (APL) variable staircase signal
- 5.18 brightness, color uniformity test signal
- 5.19 White narrow window signal
- 5.20 single-pixel signal
- 5.21 with A, all-white field area B, all gray and black farm field signal
- 5.23 Full Red Square, all green field and blue full-field signals
- 5.24 zone A, the whole Red Square area B, all green field and blue full-field signals
- 5.25 trailing time test signal
- 5.26 sync audio and video test signals
- 5.27 luminance and color difference signals coincide test signal
- 5.28 image format test signal
- 6 audio test signal
- 6.1 single audio signal
- 6.2 audio sweep signal
- 6.3 low-frequency enhancement channel sweep
- 6.4 mono single audio stream
- 6.5 pairs of single-channel audio stream
- 6.6 string left and right channel audio stream 19 single
- 6.7 Right single string left channel audio stream
- 6.8 mono audio sweep stream
- 6.9 pairs of channel audio sweep stream
- 6.12 mixed stereo (Lo/Ro) test stream
- 6.13 mixed stereo (Lt/Rt) test stream
- 7 test signal 20 business information
- 7.1 Business information table
- 7.2 program association table (PAT)
- 7.3 Program Map Table (PMT)
- 7.4 Network Information Table (NIT)
- 7.5 Service Description Table (SDT)
- 7.6 Event Information Table (EIT)
- 7.7 Time and Date Table (TDT)
- 7.8 Interval
- Appendix A (normative) paragraph (section)
- Appendix B (normative) descriptor (descriptor)
- Annex C (informative) composite sample test chart
- Annex D (informative) brightness, color uniformity test signal
- Annex E (informative) with A, all-white field area B, all gray and black farm field signal
- Annex F (informative) with A, the whole Red Square area B, all green field and blue full-field signals
- Annex G (informative) trailing time test signal sample
1 Scope
This standard specifies the standard test signals for digital television receivers used for testing.
This standard applies to our terrestrial, cable and satellite digital TV broadcast receiving equipment testing. Digital TV projection displays and projectors
Corresponding test signal can be implemented by reference.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 14857-1993 Studio encoding parameters of digital television specification (ITU-RBT.601-3.1992, EQV)
GB/T 14919-1994 for digital audio source coding specifications (ITU-RRS.646-1.1992, EQV)
Digital storage media moving image GB/T 17191.2-1997 Information technology 1.5Mbit/s data transfer rate and with
Coding Part 2 tone. Video (ISO /IEC 11172-2.1993, IDT)
Digital storage media moving image GB/T 17191.3-1997 Information technology 1.5Mbit/s data transfer rate and with
Coding of audio - Part 3. Audio (ISO /IEC 11172-3.1993, IDT)
GB/T 17975.1-2010 Information technology - Generic coding of moving pictures and associated audio information - Part 1. System (ISO /
IEC 13818-1.2007, MOD)
GB/T 17975.2-2000 Information technology - Generic coding of moving pictures and associated audio information - Part 2. Video (ITU-T
H.262.1995, IDT)
GB/T 17975.3-2002 Information technology - Generic coding of moving pictures and associated audio information - Part 3. Audio (ISO /
IEC 13818-3.1998, IDT)
GB/T 20090.2-2006 Information technology advanced audio and video coding - Part 2. Video
GB/T 22726-2008 multi-channel digital audio codec specification
GB/T 26271-2010 terrestrial digital television receiver device luminance and color difference signals overlap of technical requirements and methods of measurement
GB/T 26273-2010 terrestrial digital television receiving equipment audio and video synchronization technology requirements and methods of measurement
SJ/T 11180-1998 audio and audiovisual equipment - Digital audio characteristics of the basic methods of measurement
SJ/T 11324-2006 digital television receivers term
GY/T 155-2000 HDTV program production and exchange with the video parameters
GY/T 156-2000 studio digital audio parameters
GY/T 230-2008 digital television broadcast service information specification
3 Terms and definitions, abbreviations
3.1 Terms and Definitions
SJ/T 11324-2006 define the following terms and definitions apply to this standard.
3.1.1 Statistical multiplexing
Using statistical multiplexing features of the program itself and multiplexing between programs, within a certain range dynamically assigned and adjusted participation bitstream multiplexed
The bit rate of multiplex operation.
Note. The efficient use of statistical multiplexing is designed to channel bandwidth, the best and the brightest prospective program quality.
GB/T 19954.2-2016 | GB/T 26686-2011 | GB/T 26685-2011 | GB/T 26273-2010 | GB/T 26272-2010 | GB/T 26271-2010 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 35 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 43590.501-2024Laser display devices—Part 5-1: Measurement of optical performance for laser front projection
- GB/T 43590.503-2024Laser display devices—Part 5-3: Measuring methods of image quality for laser projection displays
- GB/T 33762-2017Method of measurement for display performance of organic light-emitting diode(OLED) television
- SJ/T 11546-2015Technical requirements and methods of measurement for integration of display wall
- GB/T 26684-2011Methods of measurement for digital terrestrial set-top box
- GB/T 26685-2011Methods of measurement for digital terrestrial television receiver
Similar standards
How to Download GB/T 26270-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 26270-2010
$530.00