GB/T 26254-2023Household and similar healthful massage cushion (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting.

This document replaces GB/T 26254-2010 "Health Massage Cushion for Household and Similar Purposes". Compared with GB/T 26254-2010, except for In addition to structural adjustments and editorial changes, the main technical changes are as follows:

--- Changed the description of the scope (see Chapter 1, Chapter 1 of the 2010 edition);

--- Changed the definitions of swing (see 3.8, 3.7 of the 2010 edition) and vibration velocity (see 3.13, 3.12 of the 2010 edition);

--- Added some terms and definitions. flapping (see 3.7), standby mode (see 3.15), massage mechanism (see 3.16), guide rail (see 3.17), Finger pressure pneumatic massage (see 3.18), pushing pneumatic massage (see 3.19), compression pneumatic massage (see 3.20);

---Changed product classification (see 4.1, 4.1 of the 2010 edition) and naming (see Appendix B, 4.2 of the 2010 edition);

--- Changed the operating environment temperature (see 5.2, 5.2 of the 2010 edition);

--- Added requirements for power connectors (see 5.4.6);

--- Changed the noise requirements (see 5.5, 5.5 of the 2010 edition) and test methods (see 6.5, 6.4 of the 2010 edition);

--- Changed the massage cushion timing requirements (see 5.7, 5.7 of the 2010 edition) and test methods (see 6.7, 6.6 of the 2010 edition);

--- Changed the requirements for the immunity of massage cushions (see 5.8.2, 5.8.2 of the 2010 edition)

--- Added the requirements and test methods for the harmonic current of the massage mat (see 5.8.3, 6.8.3);

--- Added requirements and test methods for electromagnetic field radiation of massage cushions (see 5.8.4, 6.8.4);

--- Changed the requirements for the pneumatic pressure of massage cushions (see 5.9, 5.9 of the 2010 edition) and test methods (see 6.9, 6.8 of the 2010 edition);

--- Added requirements and test methods for power overvoltage resistance performance (see 5.10, 6.10);

--- Increased standby power requirements and test methods (see 5.11, 6.11);

--- Added requirements and test methods for mechanical damage (see 5.12, 6.12);

--- Increased the content requirements and test methods of toxic and hazardous substances (see 5.13, 6.13);

--- Increase the color fastness requirements and test methods of textile fabrics and leather (see 5.14, 6.14);

--- Added durability requirements and test methods for massage cushions (see 5.15, 6.15);

--- Added temperature requirements and test methods for massage cushions with heating function (see 5.16, 6.16);

--- Increased the requirements for the test environment of massage cushions (see 6.2);

--- Changed the requirements for test instruments, meters and equipment (see 6.3, 6.2 of the 2010 edition);

---Changed the appearance test method (see 6.4.1, 6.3.1 of the 2010 edition);

--- Added additional requirements for commercial massage cushions (see Appendix B);

--- Increased human sandbag model (see Appendix C).

1 Scope

This document specifies the classification, naming, requirements, test methods, inspection, Marking, packaging, transportation, storage, etc.

This document applies to the design, production, inspection and use of massage cushions driven by electric energy for household and similar occasions.

Note: Massage cushions in this document do not include massage cushions used in the medical field and used in motor vehicles

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references Only the version corresponding to that date applies to this document. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 191 Packaging, storage and transportation icon marks

GB/T 2828.1 Counting sampling inspection procedure Part 1: Batch-by-batch inspection sampling plan retrieved by acceptance quality limit (AQL)

GB/T 2829 Periodic inspection counting sampling procedure and table (applicable to the inspection of process stability)

GB/T 4208 enclosure protection level (IP code)

GB/T 4214.1-2017 General requirements for noise test methods of household and similar electrical appliances

GB 4343.1 Electromagnetic Compatibility Requirements for Household Appliances, Electric Tools and Similar Appliances Part 1: Emission

GB/T 4343.2-2020 Electromagnetic Compatibility Requirements for Household Appliances, Electric Tools and Similar Appliances Part 2: Immunity

GB/T 5296.2 Instructions for use of consumer products - Part 2: Household and similar electrical appliances

GB/T 16799-2018 Leather for furniture

GB/T 17625.1 Electromagnetic Compatibility Limits Harmonic Current Emission Limits (Equipment Each Phase Input Current <= 16A)

GB 18401 National Basic Safety Technical Specifications for Textile Products

GB 20286 Combustion performance requirements and marking of flame-retardant products and components in public places

GB/T 26125 Determination of six restricted substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ethers) in electrical and electronic products

GB/T 26572 Limit Requirements for Restricted Substances in Electrical and Electronic Products

GB/T 35758 Measurement method of standby power of household appliances

QB/T 4986 Safety Evaluation and Measurement Methods of Electromagnetic Fields of Household and Similar Electrical Appliances

IEC 60335-2-32:2019 Safety of Household and Similar Electrical Appliances Part 2-32. Particular Requirements for Massage Appliances

3 Terms and Definitions

The following terms and definitions apply to this document.