GB/T 26099.4-2010General principles of three-dimensional modeling for mechanical products - Part 4: Model projection drawings (English PDF)
机械产品三维建模通用规则 第4部分：模型投影工程图
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26099.4-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
January 10, 2011
Implementation date
October 1, 2011
Scope
GB/T 26099.4-2010 is the English-translated version of 机械产品三维建模通用规则 第4部分：模型投影工程图.
GB/T 26099.4-2010 is the Chinese standard "General principles of three-dimensional modeling for mechanical products - Part 4: Model projection drawings".
Its scope clause reads: This section GB/T 26099 specifies the machinery or spare parts to the general requirements of the three-dimensional model projection drawing when detailed requirements, The basic design requirements and views.
This section applies to machinery parts or products using three-dimensional model projection drawing engineering drawings of the requirements. Its clauses include terms and definitions; general requirements.
Found what you need?
Document preview — GB/T 26099.4-2010
National Standard of the People's Republic of China
- ICS
- 01.100.01
- Classification
- J 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 general requirements
1 Scope
This section GB/T 26099 specifies the machinery or spare parts to the general requirements of the three-dimensional model projection drawing when detailed requirements,
The basic design requirements and views.
This section applies to machinery parts or products using three-dimensional model projection drawing engineering drawings of the requirements.
2 Normative references
The following documents contain provisions which, through reference GB/T 26099 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 4457.4 Mechanical drawings Fatou line (GB/T 4457.4-2002, ISO 128-24.1999, MOD)
GB/T 4458.1 Mechanical drawings - view (GB/T 4458.1-2002, ISO 128-34.2001, MOD)
GB/T 10609.1 Technical Drawing title bar
GB/T 13361 Technical Drawing generic term
GB/T 14665 Mechanical Engineering CAD drawing rules
GB/T 14689 Technical drawings and drawings format format (GB/T 14689-2008, ISO 5457.1999, MOD)
GB/T 14690 Technical Drawing ratio (GB/T 14690-1993, eqv ISO 5455. 1979)
GB/T 14691 Technical drawings font (GB/T 14691-1993, eqv ISO 3098-1. 1974)
GB/T 14692 Technical drawings - Projection methods (GB/T 14692-2008, ISO /DIS5456.1993, NEQ)
GB/T 16675.1 Technical drawings - Simplified representation - Part 1. - Drawing
GB/T 16948 Technical product documentation - Vocabulary term projection method (GB/T 16948-1997, eqv ISO 10209-2.1993)
Sectional GB/T 17452 Technical drawings - view and a sectional view (GB/T 17452-1998, eqv ISO /DIS11947-
2.1995)
GB/T 17453 Technical drawings - sectional area of representation (GB/T 17453-2005, ISO 128-50.2001,
IDT)
GB/T 26099.1 General rules for three-dimensional modeling of mechanical products - Part 1. General requirements
3 Terms and Definitions
GB/T 13361, GB/T 16948 and GB/T 26099.1 and established the following terms and definitions apply GB/T 26099 of
This section.
3.1 Drawing template
3D mechanical design software, a file type. By standardizing we customize and use the file enables the projector to produce drawings of
To harmonize and improve user productivity purposes.
4 general requirements
Three-dimensional mechanical design software to produce engineering drawings through the projection shall meet the following general requirements.
GB/T 26641-2021 | GB/T 23901.5-2019 | GB/T 23906-2009 | GB/T 26100-2010 | GB/T 26099.3-2010 | GB/T 26099.2-2010 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 26099.4-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 26099.1-2010 — General principles of three-dimensional modeling for mechanical products - Part 1: General requirements
GB/T 26099.2-2010 — General principles of three-dimensional modeling for mechanical products - Part 2: Part modeling
GB/T 26099.3-2010 — General principles of three-dimensional modeling for mechanical products - Part 3: Assembly modeling
Secure payment via Stripe
Payments accepted
GB/T 26099.4-2010
$85.00