GB/T 26099.1-2010General principles of three-dimensional modeling for mechanical products - Part 1: General requirements (English PDF)
机械产品三维建模通用规则 第1部分：通用要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26099.1-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
January 10, 2011
Implementation date
October 1, 2011
Scope
GB/T 26099.1-2010 is the English-translated version of 机械产品三维建模通用规则 第1部分：通用要求.
GB/T 26099.1-2010 is the Chinese standard "General principles of three-dimensional modeling for mechanical products - Part 1: General requirements".
Its scope clause reads: This section GB/T 26099 specifies the term three-dimensional modeling of mechanical products, classification and constitute a model, modeling general requirements, the model file Nomenclature, model checking and model management requirements.
This section applies to build three-dimensional mechanical product modeling process three-dimensional digital model, application and management. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 26099.1-2010
National Standard of the People's Republic of China
- ICS
- 01.100.01
- Classification
- J 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Feature
- 3.2 Entity solidbody
- 3.3 Maturity maturedegree
1 Scope
This section GB/T 26099 specifies the term three-dimensional modeling of mechanical products, classification and constitute a model, modeling general requirements, the model file
Nomenclature, model checking and model management requirements.
This section applies to build three-dimensional mechanical product modeling process three-dimensional digital model, application and management.
2 Normative references
The following documents contain provisions which, through reference GB/T 26099 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 16722.1 Technical product documentation computer-aided technical information - Security requirements (GB/T 16722.1-2008,
ISO 11442.2006, NEQ)
GB/T 16722.2 Technical product documentation computer-aided technical information - Original documentation (GB/T 16722.2-2008,
ISO 11442.2006, NEQ)
GB/T 16722.3 Technical product documentation - computer-aided information processing technology product design process state (GB/T 16722.3-2008, ISO 11442.2006, NEQ)
GB/T 16722.4 Technical product documentation computer-aided technical information - Document management and retrieval system (GB/T 16722.4-2008, ISO 11442.2006, NEQ)
GB/T 18784 CAD/CAM data quality
GB/T 18784.2 CAD/CAM data quality assurance methods
GB/T 24734.1 Technical product documentation - Digital product definition data practices - Part 1. Terms and definitions (GB/T 24734.1-2009, ISO 16792.2006, NEQ)
GB/T 24734.2-2009 Technical product documentation - Digital product definition data practices - Part 2. Data set identification and control (ISO 16792.2006, NEQ)
3 Terms and Definitions
GB/T 24734.1 and established the following terms and definitions apply to this section.
3.1 Feature
A collection of geometry or engineering information and the expression of certain features and semantics of a combination of engineering.
3.2 Entity solidbody
From the surface or edge forms a closed volume of the three-dimensional geometry.
3.3 Maturity maturedegree
The design is completed and the degree of perfection of quantitative description, its value ranges from 0 to 1.
GB/T 26641-2021 | GB/T 23901.5-2019 | GB/T 23906-2009 | GB/T 26100-2010 | GB/T 26099.4-2010 | GB/T 26099.3-2010 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 46848.7-2025Technical product documentation - Product design data management requirements - Part 7: Check and issue
- GB/T 46849.1-2025Technical product documentation - Requirements for model based definition - Part 1: General requirements
- GB/T 33582-2017General principles of structural finite element analysis for mechanical products
Similar standards
How to Download GB/T 26099.1-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 26099.2-2010 — General principles of three-dimensional modeling for mechanical products - Part 2: Part modeling
GB/T 26099.3-2010 — General principles of three-dimensional modeling for mechanical products - Part 3: Assembly modeling
GB/T 26099.4-2010 — General principles of three-dimensional modeling for mechanical products - Part 4: Model projection drawings
Secure payment via Stripe
Payments accepted
GB/T 26099.1-2010
$85.00