Valid

GB/T 26092-2010Gear helix measuring instrument (English PDF)

齿轮螺旋线测量仪

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 26092-2010 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

January 10, 2011

Implementation date

October 1, 2011

Scope

GB/T 26092-2010 is the English-translated version of 齿轮螺旋线测量仪.

GB/T 26092-2010 is the Chinese standard "Gear helix measuring instrument". Its scope clause reads: This standard specifies the terms and definitions, types and basic parameters of the helical gear measuring instrument, requirements, safety performance, testing conditions, test Methods, marking and packaging.

This standard applies to measurable gear modulus of not less than 0.5mm, tip diameter of not more than 600mm of gear helix meter (with Hereinafter referred to as "spiral measuring instrument"). Its clauses include terms and definitions; types and basic parameters.

Found what you need?

Document preview — GB/T 26092-2010

National Standard of the People's Republic of China

ICS: 17.040.30
Classification: J 42

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

1 Scope
2 Normative references
3 Terms and Definitions
4 Types and basic parameters

1 Scope

This standard specifies the terms and definitions, types and basic parameters of the helical gear measuring instrument, requirements, safety performance, testing conditions, test

Methods, marking and packaging.

This standard applies to measurable gear modulus of not less than 0.5mm, tip diameter of not more than 600mm of gear helix meter (with

Hereinafter referred to as "spiral measuring instrument").

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 191-2008 Packaging - Pictorial signs (ISO 780.1997, MOD)

GB 4793.1-2007 measurement, control and laboratory safety requirements for electrical equipment Part 1. General requirements (IEC 61010-

1.2001, IDT)

GB/T 4879-1999 rust-proof packaging

GB/T 5048-1999 proof packaging

GB/T 6388-1986 transport package shipping mark

GB/T 6468-2010 gear helix model

GB/T 9969-2008 General Industrial Product Manual

GB/T 10095.1-2008 Cylindrical gear accuracy system - Part 1. Definitions tooth surface deviation and ipsilateral tooth allowable value (ISO 1328-1.1995, IDT)

GB/T 14436-1993 General industrial products assurance documents

GB/T 17163-2008 dimensional measuring instruments - Basic terminology

3 Terms and Definitions

GB/T 10095.1-2008, GB/T 17163-2008 established in the following terms and definitions apply to this standard.

3.1

Or generating method using the coordinate method, using the appropriate sensors, with measurement data output system, it is mainly used to measure the helix form deviation,

Helix tilt bias, special measuring instrument gear helix total deviation parameters such projects.

4 Types and basic parameters

Type 4.1

Press control mode helix meter can be divided into Computer Numerical Control (CNC) and non-computer numerical control type. Digital computer

Controlled helix meter type and the name of the main part shown in Figure 1. Illustration illustration purposes only and does not indicate a specific configuration.

GB/T 40742.1-2021 | GB/T 22092-2018 | GB/T 26093-2010 | GB/T 26091-2010 | GB/T 26090-2010 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

GB/T 19878-2026|GB/T 47121-2026|GB/T 10922-2025|GB/T 24468-2025|GB/T 34874.1-2025|GB/T 34874.4-2025

How to Download GB/T 26092-2010

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.