Valid

GB/T 26044-2010Single crystal round copper wire and drawing stock for signal transmission (English PDF)

信号传输用单晶圆铜线及其线坯

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 26044-2010 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

January 10, 2011

Implementation date

October 1, 2011

Scope

GB/T 26044-2010 is the English-translated version of 信号传输用单晶圆铜线及其线坯.

GB/T 26044-2010 is the Chinese standard "Single crystal round copper wire and drawing stock for signal transmission".

Its scope clause reads: This standard specifies the signal transmission line and single-wafer copper billet requirements, test methods, inspection rules and signs, packaging, transportation, storage Storage, quality certificate and contract (or purchase order) content.

This standard applies to thermal-type continuous casting technology produced by the circular cross-section and single wafer made of copper billet copper single wafer. Its clauses include terms and definitions; requirements.

Found what you need?

Document preview — GB/T 26044-2010

National Standard of the People's Republic of China

ICS
77.150.30
Classification
H 62

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Requirements

1 Scope

This standard specifies the signal transmission line and single-wafer copper billet requirements, test methods, inspection rules and signs, packaging, transportation, storage

Storage, quality certificate and contract (or purchase order) content.

This standard applies to thermal-type continuous casting technology produced by the circular cross-section and single wafer made of copper billet copper single wafer.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 3048.2 wire and cable electrical performance test methods - Part 2. Metal resistivity test

GB/T 3952 electrician copper billet

GB/T 3953 electrician round copper wire

GB/T 4909.2 Test methods for bare wires - Part 2. Measure

GB/T 4909.3 Test methods for bare wires - Part 3. Tensile Test

GB/T 4909.4 Test methods for bare wires - Part 4. torsion test

GB/T 5121 (all parts) of copper and copper alloys -

YS/T 448 copper and copper alloy casting and machining products macroscopic inspection method

3 Terms and Definitions

The following terms and definitions apply to this standard.

3.1 Single wafer copper billet Thesinglecrystalroundcopperdrawingstock

Hot mold continuous casting technology to produce a circular cross-section line blank, and any number of grains within a circular cross-section contained no more than 10 copper wire rod.

3.2 Single wafer copper Thesinglecrystalroundcopperwire

Single wafer further processing of copper billet made of round copper wire.

4 Requirements

4.1 Categories

4.1.1 grade, status, specifications

Its single wafer copper wire rod, according to chemical composition divided into two grades. The grade, status, size should be in accordance with Table 1.

Table 1 single wafer and copper wire rod grades, status, specifications

Name brand status diameter/ mm

Single wafer copper billet TU1, TU2 cast (Z) > 3.0 ~ 30.0

Single wafer copper TU1, TU2

Soft (R) 0.070 ~ 3.0

Hard (Y) 0.070 ~ 12.0

Note. soft state (R) is a low temperature annealed copper wire.

GB/T 27671-2023 | GB/T 26302-2020 | GB/T 26017-2020 | GB/T 26045-2025 | GB/T 26035-2010 | GB/T 26034-2010 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 26044-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 26044-2010

$165.00