GB/T 26021-2010Gold bar (English PDF)
金条
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26021-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
January 10, 2011
Implementation date
October 1, 2011
Scope
GB/T 26021-2010 is the English-translated version of 金条.
GB/T 26021-2010 is the Chinese standard "Gold bar". Its scope clause reads: This standard specifies the requirements for gold bullion, test methods, inspection rules and signs, packaging, transportation, storage and so on.
This standard applies to the use of cold stamping or casting gold bars. Its clauses include requirements.
Found what you need?
Document preview — GB/T 26021-2010
National Standard of the People's Republic of China
- ICS
- 77.120.99
- Classification
- H 68
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Requirements
- 1 IC-Au99.99
- 2 IC-Au99.95
- 3 Pl-Au99.99
- 4 Pl-Au99.95
1 Scope
This standard specifies the requirements for gold bullion, test methods, inspection rules and signs, packaging, transportation, storage and so on.
This standard applies to the use of cold stamping or casting gold bars.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 4134 ingot
GB/T 8170 repair value expressed about the rules and limit values and judgment
GB/T 11066 (all parts) Methods for chemical analysis of gold
3 Requirements
3.1 Categories
Bullion by the production process and the chemical composition divided into class 24 grades.
Table 1 Grade
No. Grade corresponds production process
3 Pl-Au99.99
4 Pl-Au99.95
Casting method suppress
3.2 Physical Specifications
3.2.1 Nominal bullion weight
20g, 30g, 50g, 68g, 100g, 200g, 300g, 500g, 1000g.
3.2.2
bullion rectangular bottom and four sides, the sides allow proper inclination.
3.2.3
bullion weight in single units by GB/T 8170 provisions of rounding to 0.01g. Bullion weight does not allow negative bias. By both sides
Consultations may provide additional specifications.
3.2.4
bullion size requirements shall comply with the requirements of Table 2, the bottom surface of the corner and the surrounding quadrangular transition should be smooth. Available by agreement between its
His specifications.
3.3 appearance quality
3.3.1
bullion should edge, corner complete, bright surface, the surface smooth transition.
3.3.2
bullion does not allow empty, excessive shrinkage, inclusions, porosity, pockmarked face, cold shuts, surface pumping pits, ice-like defects.
GB/T 23520-2022 | GB/T 23276-2009 | GB/T 23277-2009 | GB/T 26308-2026 | GB/T 26020-2026 | GB/T 26028-2010 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 26021-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 26021-2010
$105.00