Valid

GB/T 26019-2010Methods for chemical analysis of high impurity tungsten mineral - Determination of tungsten trioxide content - Twice separation and igniting gravimetric method (English PDF)

高杂质钨矿化学分析方法 三氧化钨量的测定 二次分离灼烧重量法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 26019-2010 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

January 10, 2011

Implementation date

October 1, 2011

Scope

GB/T 26019-2010 is the English-translated version of 高杂质钨矿化学分析方法 三氧化钨量的测定 二次分离灼烧重量法.

GB/T 26019-2010 is the Chinese standard "Methods for chemical analysis of high impurity tungsten mineral - Determination of tungsten trioxide content - Twice separation and igniting gravimetric method".

Its scope clause reads: This standard specifies the determination of tungsten trioxide in high-quality tungsten.

This standard is applicable to the determination of the amount of tungsten oxide in tungsten ore with a phosphorus content of less than 2%, a titanium content of less than 1% and a tin content of less than 2%. three Tungsten oxide measurement range. 20% or more. Its clauses include method summary; reagent.

Found what you need?

Document preview — GB/T 26019-2010

National Standard of the People's Republic of China

ICS
77.120.99
Classification
H 63

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 method summary
  • 3 reagent
  • 3.11 Ammonia-Ammonium Nitrate Mixture
  • 3.17 ferric nitrate solution
  • 3.18 beryllium nitrate solution

1 Scope

This standard specifies the determination of tungsten trioxide in high-quality tungsten.

This standard is applicable to the determination of the amount of tungsten oxide in tungsten ore with a phosphorus content of less than 2%, a titanium content of less than 1% and a tin content of less than 2%. three

Tungsten oxide measurement range. 20% or more.

2 method summary

Samples in the presence of a small amount of ammonium fluoride, hydrochloric acid, nitric acid, perchloric acid dissolved, concentrated to white smoke to get rid of excess fluoride and nitric acid

Roots, tungsten tung tung acid precipitation, filtration, separation with most of the coexisting elements, with ammonia dissolved tungstic acid, adding ferric nitrate and beryllium nitrate precipitation separation

His impurities, the filtrate by steaming, burning, to hydrofluoric acid to silicon, and then said after the amount of tungsten trioxide. The amount of tungsten trioxide in the residue was measured by spectrophotometry,

Correction results. When the molybdenum content is greater than 0.3%, the results need to be corrected.

3 reagent

Unless otherwise stated, the reagents used in this section are analytical reagents that conform to national standards or industry standards, and the water used is distilled water.

3.1

Sodium peroxide.

3.2

Ammonium fluoride.

3.3

Disodium EDTA (EDTA).

3.4

Hydrochloric acid (rho1.19g/mL).

3.5

nitric acid (rho1.42g/mL).

3.6

hydrofluoric acid (rho1.15g/mL).

3.7

anhydrous ethanol.

3.8

ammonia (rho0.90g/mL).

3.9

aqueous ammonia solution (1 1).

3.10

aqueous ammonia solution (1 4).

3.11 Ammonia-Ammonium Nitrate Mixture

Remove 40 mL of aqueous ammonia (3.9), add 450 mL of water, add 2 mL of nitric acid (3.5).

3.12

Sodium hydroxide solution (24 g/L).

3.13

Sodium hydroxide solution (100 g/L).

3.14

Sodium hydroxide solution (50 g/L).

3.15

perchloric acid (rho1.67g/mL).

3.16

Perchloric acid wash solution (1.199).

3.17 ferric nitrate solution

Weigh 1g of pure iron powder, add 50mL nitric acid (3.5), dissolved in the electric furnace dissolved in water after dilution

1000mL.

3.18 beryllium nitrate solution

weighed 10g analysis of pure BeSO4 · 4H2O, add 400mL water dissolved, add 50mL ammonia (3.8), heating boiled

GB/T 37204-2018 | GB/T 21183-2017 | GB/T 26314-2010 | GB/T 26023-2010 | GB/T 26012-2010 | GB/T 26009-2010 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 26019-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 26019-2010

$125.00