Valid

GB/T 25907.7-2010Information technology - Uyghur, Kazak, Kirgiz coded character set - 16 Dot matrix font - Part 7: Teilik lean (English PDF)

信息技术 维吾尔文、哈萨克文、柯尔克孜文编码字符集 16点阵字型 第7部分:塔里克白体

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 25907.7-2010 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

January 10, 2011

Implementation date

November 1, 2011

Scope

GB/T 25907.7-2010 is the English-translated version of 信息技术 维吾尔文、哈萨克文、柯尔克孜文编码字符集 16点阵字型 第7部分:塔里克白体.

GB/T 25907.7-2010 is the Chinese standard "Information technology - Uyghur, Kazak, Kirgiz coded character set - 16 Dot matrix font - Part 7: Teilik lean". Its scope clause reads: GB 25907 provisions of this part of the GB 21669-2008 in Uygur, Kazak, Kirgiz 16 character dot matrix column Rick white body font.

This section applies to the Uygur, Kazak, Kirgiz information systems, but also for other related equipment. Its clauses include terms and definitions; graphic character; standard data management; byte 1 byte.

Found what you need?

Document preview — GB/T 25907.7-2010

National Standard of the People's Republic of China

ICS
35.040
Classification
L 71

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 graphic character
  • 5 standard data management
  • 7 bitmap fonts
  • Appendix A (informative) Tariq white body
  • Annex B (informative) font width information in Table
  • Annex C (normative) 16 dot font data

1 Scope

GB 25907 provisions of this part of the GB 21669-2008 in Uygur, Kazak, Kirgiz 16 character dot matrix column

Rick white body font.

This section applies to the Uygur, Kazak, Kirgiz information systems, but also for other related equipment.

2 Normative references

The following documents contain provisions which, through reference in this text, constitute provisions of this part. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this section, however, encourage the parties to this part of the research agreement

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this section.

GB 21669-2008 IT Uygur, Kazak, Kirgiz coded character set

GB 13000 Information technology - Universal Multiple-Octet Coded Character Set (UCS) (GB 13000-2010, ISO /IEC 10646.2003, IDT)

3 Terms and Definitions

The following terms and definitions apply to this section.

3.1 Font glyph

One kind of recognizable abstract graphic symbol, it does not depend on any particular design.

3.2 Font

Glyph image set having the same basic design, such as. Tariq white body.

3.3 Bitmap fonts dotmatrixfont

In a collection of dots to show the graphic character type (shape).

3.4 Font width

The effective width of the dot graphic characters.

3.5 Word order characterorder

Graphic character in the set are arranged according to certain rules of order.

4 graphic character

4.1 The number of characters

This section according to GB 21669-2008 provisions provided Uygur, Kazak, Kirgiz 190 graphic characters, in which.

Uygur, Kazak, Kirgiz behalf of 42 characters;

Uygur, Kazak, Kirgiz deformed characters appear 143;

Uygur, Kazak, Kirgiz share numbers, punctuation marks, special symbols 5.

4.2 A character sequence

This section provides 190 Uygur, Kazak, Kirgiz nominal character, appeared deformed characters and common symbols font

They are arranged in the order specified in GB 13000.

5 standard data management

In order to strengthen the exchange of information with the product with Uighur, Kazakh, Kirghiz management font and text-based data standards, to ensure that this

Part in the implementation of data consistency and correctness to authorize the use of font data transfer matters, to maintain the standard font data,

Updating and revision of the responsibility of the unified centralized units.

The method represents bitmap fonts

6.1 Grid

Equidistant grid by a number of vertical and horizontal lines intersect to form.

The provisions of section 16 bitmap fonts, which is a lateral grid 16 grid, 16 longitudinal grid. The center of each square is set at the center position of the point.

Raster Only constituting the lattice points are positioned 16 dot grid shown in Figure 1.

Figure 116 dot raster

6.2 points

Point is the smallest unit constituting the lattice-shaped, circular indicated that it is located within the black areas of the parties to the grid.

6.3 lattice words

Words Uygur, Kazak, Kirgiz graphic character bitmap fonts from a number of points placed within the grid to set the table

Shown. Uygur, Kazak, Kirgiz, "" the word lattice 16 shown in Figure 2.

Figure 216 words dot letters for ""

6.4 font width information

Uygur, Kazak, Kirgiz is unequal width font, each character has its own specific width, the width of the font width

Information table to represent, see Appendix B.

7 bitmap fonts

7.1 font data

Uygur, Kazak, Kirgiz - 16 dot matrix representation of the data, see Appendix C.

Table 7.2 bitmap fonts

GB 21669-2008 in 190 This section provides the Uighur, Kazakh, Kirgiz 16 dot matrix graphic character Tarifa

G white body font in Table 1.

Table 1 Uygur, Kazak, Kirgiz Text table

Appendix A (Informative)

Tariq white body

Tariq white body is a Uighur, Handwritten Kazakh, Kirgiz, is a type of alphabetic writing, writing from right to the line section

Left, all the characters showed their different widths. "Tariq" means lifting, stopped, note, appendix. Tariq body, also known as Sri Lanka beat Japan chirography (Nasta'liq), ancestors of the vast majority of classical manuscripts are written in this font. Current Uighur, Kazakh, Kilkee

Zi Wen white body text, bold writing and Tariq body is very different. Tariq body freedom, cheerful, compact, beautiful as embroidery fonts, easy to read and write,

Capacity, not interspersed between letters phenomenon, vertical painting thin, horizontal painting rough spot was inclined square.

Appendix B (Informative)

Font width information table

Uygur, Kazak, Kirgiz is unequal width font, each character has its own specific width, font width information table

This section defines the effective width of the 190-character dot pattern, see Table B.1.

Table B.1 font width information table

Wide code word code word code word wide wide wide code word code word code word wide width

060C 2 0678 13 FBAD 6 FBF2 9 FEA5 7 FED7 4

061B 2 067E 10 FBD3 8 FBF3 9 FEA6 7 FED8 5

061F 4 0686 7 FBD4 10 FBF4 8 FEA7 6 FED9 9

0626 9 0698 4 FBD5 6 FBF5 8 FEA8 6 FEDA 11

0627 2 06AD 8 FBD6 6 FBF6 9 FEA9 5 FEDB 6

0628 10 06AF 12 FBD7 4 FBF7 9 FEAA 5 FEDC 6

062A 10 06BE 7 FBD8 6 FBF8 7 FEAD 4 FEDD 8

062C 7 06C5 4 FBD9 4 FBF9 9 FEAE 6 FEDE 11

062D 7 06C6 4 FBDA 6 FBFA 9 FEAF 4 FEDF 3

062E 7 06C7 4 FBDB 4 FBFB 7 FEB0 6 FEE0 5

062F 5 06C8 4 FBDC 6 FE89 9 FEB1 15 FEE1 5

0631 4 06C9 4 FBDD 6 FE8A 7 FEB2 15 FEE2 5

0632 4 06CB 4 FBDE 4 FE8B 4 FEB3 8 FEE3 4

0633 15 06D0 9 FBDF 6 FE8C 5 FEB4 11 FEE4 4

0634 15 06D5 5 FBE0 4 FE8D 2 FEB5 15 FEE5 7

0639 6 FB56 10 FBE1 6 FE8E 5 FEB6 15 FEE6 10

063A 6 FB57 11 FBE2 4 FE8F 10 FEB7 8 FEE7 4

0640 5 FB58 4 FBE3 6 FE90 11 FEB8 11 FEE8 5

0641 9 FB59 5 FBE4 9 FE91 4 FEC9 6 FEE9 5

0642 7 FB7A 7 FBE5 8 FE92 5 FECA 6 FEEA 6

0643 8 FB7B 7 FBE6 4 FE95 10 FECB 4 FEED 4

0644 8 FB7C 6 FBE7 5 FE96 11 FECC 5 FEEE 6

0645 5 FB7D 6 FBE8 4 FE97 4 FECD 6 FEEF 9

0646 7 FB8A 4 FBE9 5 FE98 5 FECE 6 FEF0 7

0648 4 FB8B 6 FBEA 7 FE9D 7 FECF 4 FEF1 9

0649 9 FB92 12 FBEB 7 FE9E 7 FED0 5 FEF2 7

064A 9 FB93 12 FBEC 7 FE9F 6 FED1 9 FEF3 4

066A 7 FB94 6 FBED 8 FEA0 6 FED2 11 FEF4 5

0674 3 FB95 6 FBEE 8 FEA1 7 FED3 3 FEFB 4

0675 6 FBAA 7 FBEF 8 FEA2 7 FED4 5 FEFC 6

0676 4 FBAB 7 FBF0 9 FEA3 6 FED5 7

0677 6 FBAC 6 FBF1 9 FEA4 6 FED6 8

Appendix C (Normative)

16 dot matrix font data

C.1 16 dot matrix font data representation

This section, the graphic character font data is represented by a dot. Each dot font data is 16 × 16 (dots × vertical transverse

Column points), a total of 256 bits, 32 bytes.

C.2 16 dot matrix font data record format

32 bytes 16 dot font data and order of a 0 byte to 31-byte end, are expressed in hexadecimal, per line

Two bytes, the recording format is as follows.

Rows

Number of columns

0 1,234,567,891,011,121,314 15

00 Byte 1 Byte

2 bytes

3 bytes

1530 bytes 31 bytes

C.3 16 dot matrix font data, for example

0626 FEB6 FEDA FEFC 0,000,000,000,000,000

0C00 0040 0080 1000

1,000,004,000,805,000

0C00 00A0 0480 5000

1180 00A0 0880 5000

0,300,000,004,805,000

0,400,024,888,805,000

4600 06D8 C180 5000

8300 43B6 7E60 6000

8100 8200 0000 C000

8,100,820,000,000,000

4,200,820,000,000,000

3C00 8400 0000 0000

0,000,780,000,000,000

0,000,000,000,000,000

0,000,000,000,000,000 […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 25907.7-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 25907.7-2010

$195.00