Valid

GB/T 25772-2010Rolling bearings - Bearings for railway passenger coach (English PDF)

滚动轴承 铁路客车轴承

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 25772-2010 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 23, 2010

Implementation date

June 1, 2011

Scope

GB/T 25772-2010 is the English-translated version of 滚动轴承 铁路客车轴承.

GB/T 25772-2010 is the Chinese standard "Rolling bearings - Bearings for railway passenger coach".

Its scope clause reads: This standard specifies the railway passenger rolling bearing (hereinafter referred to as bearing) code method, structure type, size, technical requirements, inspection Test methods, inspection rules, marking, packaging and storage, etc. rust.

This standard applies to speeds no greater than bearing at 160km/h conditions of use, for bearing production, testing and acceptance. Its clauses include terms and definitions; symbol.

Found what you need?

Document preview — GB/T 25772-2010

National Standard of the People's Republic of China

ICS
21.100.20
Classification
J 11

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Symbol

1 Scope

This standard specifies the railway passenger rolling bearing (hereinafter referred to as bearing) code method, structure type, size, technical requirements, inspection

Test methods, inspection rules, marking, packaging and storage, etc. rust.

This standard applies to speeds no greater than bearing at 160km/h conditions of use, for bearing production, testing and acceptance.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 272-1993 Rolling Code Method

GB/T 307.2-2005 Rolling measuring and testing principles and methods (ISO 1132-2.2001, MOD)

GB/T 307.3-2005 bearings - General technical rules

GB/T 1176-1987 Cast Copper Alloys conditions

GB/T 4199-2003 Rolling defined tolerances (ISO 1132-1.2000, MOD)

GB/T 6930-2002 Rolling Vocabulary (ISO 5593.1997, IDT)

GB/T 7811-2007 Rolling parameter symbols (ISO 15241.2001, IDT)

GB/T 8597-2003 Rolling rust-proof packaging

GB/T 18254-2002 high carbon chromium bearing steel

GB/T 24605-2009 Rolling product logo

GB/T 24608-2009 Rolling commodity parts and inspection rules

Methods of measurement GB/T 25769-2010 Rolling radial clearance

JB/T 1255-2001 carbon chromium bearing steel bearing parts heat treatment technology conditions

Supplementary Provisions JB/T 2974-2004 Rolling Code Method

JB/T 5391-2007 railway locomotives and wagons Rolling bearing parts magnetic particle testing procedures

JB/T 5392-2007 Rolling bearing parts of railway locomotives and wagons crack inspection

JB/T 6641-2007 Rolling residual magnetism and Evaluation Method

JB/T 7048-2002 plastic cage bearing parts and technical conditions

JB/T 7051-2006 Rolling components surface roughness measurement and evaluation methods

JB/T 7361-2007 Rolling bearing parts hardness test

TB/T 3010-2001 railway vehicles Rolling carbon chromium bearing steel ordering technology

3 Terms and Definitions

Terms and definitions GB/T 4199-2003 and GB/T 6930-2002 established apply to this standard.

4 Symbol

GB/T 7811-2007 symbols given apply to this standard.

GB/T 25763-2024 | GB/T 25764-2024 | GB/T 25770-2024 | GB/T 25767-2025 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 25772-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 25772-2010

$85.00