GB/T 25762-2010Rolling bearings - Needle roller and cage assemblies for motorcycle connecting rod (English PDF)
滚动轴承 摩托车连杆支承用滚针和保持架组件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 25762-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 23, 2010
Implementation date
June 1, 2011
Scope
GB/T 25762-2010 is the English-translated version of 滚动轴承 摩托车连杆支承用滚针和保持架组件.
GB/T 25762-2010 is the Chinese standard "Rolling bearings - Needle roller and cage assemblies for motorcycle connecting rod".
Its scope clause reads: This standard specifies the motorcycle inside the engine crank pin and connecting rod piston pin bearing needle roller and cage assembly (hereinafter referred to as assembly) on behalf of No method, technical requirements, test methods, inspection rules, rust and packaging.
This standard applies to motorcycle connecting rod bearing with assembly, also apply to air compressors and other crank linkage with the link with the support group Member of the production, testing and acceptance.
This standard does not apply to special purpose motorcycles (such as motorcycle racing and motocross) link support With components. Its clauses include terms and definitions; symbols (see figure 1).
Found what you need?
Document preview — GB/T 25762-2010
National Standard of the People's Republic of China
- ICS
- 21.100.20
- Classification
- J 11
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 symbols (see Figure 1)
1 Scope
This standard specifies the motorcycle inside the engine crank pin and connecting rod piston pin bearing needle roller and cage assembly (hereinafter referred to as assembly) on behalf of
No method, technical requirements, test methods, inspection rules, rust and packaging.
This standard applies to motorcycle connecting rod bearing with assembly, also apply to air compressors and other crank linkage with the link with the support group
Member of the production, testing and acceptance. This standard does not apply to special purpose motorcycles (such as motorcycle racing and motocross) link support
With components.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 309-2000 Rolling Needle (neqISO 3096.1996)
GB/T 699-1999 quality carbon structural steel
GB/T 3077-1999 alloy steel
GB/T 4199-2003 Rolling defined tolerances (ISO 1132-1.2000, MOD)
GB/T 4570-2008 motorcycles and endurance test methods
GB/T 5374-2008 motorcycles and reliability of the test method
GB/T 6930-2002 Rolling Vocabulary (ISO 5593.1997, IDT)
GB/T 8597-2003 Rolling rust-proof packaging
GB/T 18254-2002 high carbon chromium bearing steel
GB/T 20056-2006 Rolling bearings Radial needle roller and cage assembly dimensions and tolerances (ISO 3030.1996, MOD)
GB/T 24607-2009 rolling bearing life and reliability testing and rating
GB/T 24608-2009 Rolling commodity parts and inspection rules
JB/T 1255-2001 carbon chromium bearing steel bearing parts heat treatment technology conditions
Supplementary Provisions JB/T 2974-2004 Rolling Code Method
3 Terms and Definitions
Terms and definitions GB/T 4199-2003 and GB/T 6930-2002 established apply to this standard.
4 symbols (see Figure 1)
Unless otherwise indicated, the symbol shown in the figure and table showing the value expressed nominal size.
Ew. the outer diameter of the needle group
Fw. inner diameter of the needle group
Bc. Component Width
GB/T 25770-2024 | GB/T 25764-2024 | GB/T 25763-2024 | GB/T 25767-2025 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 25762-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 25762-2010
$169.00