GB/T 25737-2025Acceptance specification for 1000kV substation monitoring system (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting.

This document replaces GB/T 25737-2010 "1000kV substation monitoring system acceptance specification" and is consistent with GB/T 25737-2010.

In addition to structural adjustments and editorial changes, the main technical changes are as follows.

— Added acceptance conditions such as product inspection, safety and reliability, and acceptance environment (see Chapter 4);

— Added content related to the acceptance process and clarified the acceptance organization process (see Chapter 5);

— Added a chapter on basic acceptance content, refined the common parts of factory acceptance and on-site acceptance, and added new protocol documents, configuration files, etc.

Review requirements and system and equipment information consistency verification requirements (see 6.1);

— Added content related to acceptance and rectification, and clarified the requirements for rectification of problems during the acceptance period (see Chapter 7);

— Added content related to acceptance results, clarified acceptance conditions, acceptance reports and acceptance material filing requirements (see Chapter 8);

— Changed the responsibilities of each unit in the acceptance working group (see Appendix A, Chapter 4 of the 2010 edition);

— Added acceptance test items for functions such as sequential control and intelligent alarm (see Appendix C);

— Added the main plant station joint commissioning test content (see Appendix D).

Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.

This document was proposed by the China Electricity Council.

This document is under the jurisdiction of the National Technical Committee for Ultra-High Voltage AC Transmission Standardization (SAC/TC569).

This document was drafted by: China Electric Power Research Institute Co., Ltd., State Grid Corporation of China, China Southern Power Grid Co., Ltd., State Grid Tianjin Electric Power Company, State Grid Shanghai Electric Power Company, China Southern Power Grid Co., Ltd. Ultra-high Voltage Transmission Company, State Grid Hunan Province Power Co., Ltd., Guangxi Power Grid Co., Ltd. Electric Power Research Institute, State Grid Liaoning Electric Power Co., Ltd., State Grid Chongqing Electric Power Co., Ltd.

Electric Power Research Institute of State Grid Corporation of China, Electric Power Research Institute of Guizhou Power Grid Co., Ltd., Electric Power Research Institute of State Grid Hebei Electric Power Company, North China Electric Power University, State Grid Shandong Electric Power Company, State Grid Corporation of China Northeast Branch, and State Grid Corporation of China East China Branch.

The main drafters of this document are: Li Ang, Chang Naichao, Li Jin, Xie Xin, Chen Jian, Zhang Jinhu, Chen Hongfu, Zhang Kefeng, Li Yalei, Li Long, Zhou Ke, Wang Shunjiang, Zeng Zhiqiang, Li Jinsong, Xu Changbao, Gao Jun, Lv Fangcheng, Liu Yong, Zhao Na, Peng Fei, Li Wenzhuo, and Zhang Liang.

The previous versions of this document and the documents it replaces are as follows.

— First published in 2010 as GB/T 25737-2010;

— This is the first revision.

1 Scope

This document specifies the acceptance conditions, acceptance process, acceptance content, acceptance rectification and acceptance results of the 1000kV substation monitoring system. Require.

This document is applicable to the acceptance of 1000kV substation monitoring systems. It can be used as a reference for the acceptance of substation monitoring systems at other voltage levels.

2 Normative references

GB/T 24833

3 Terms and Definitions

The terms and definitions defined in GB/T 24833 and the following apply to this document.

4 Acceptance conditions