GB/T 25713-2010Machinery vibrating stress relief device (English PDF)
机械式振动时效装置
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 25713-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 23, 2010
Implementation date
July 1, 2011
Scope
GB/T 25713-2010 is the English-translated version of 机械式振动时效装置.
GB/T 25713-2010 is the Chinese standard "Machinery vibrating stress relief device". Its scope clause reads: This standard specifies the terms and definitions mechanical vibration aging device, basic parameters, technical requirements, test methods and inspection rules and Packaging, labeling and storage and transportation.
This standard applies to carbon steel, low alloy steel, stainless steel, cast iron, non-ferrous metals (copper, aluminum, titanium and its alloys) and other materials casting , Forgings, welded parts, molds, machined parts for the processing target mechanical vibration aging device (hereinafter referred to as a "means"). Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 25713-2010
National Standard of the People's Republic of China
- ICS
- 25.120.30
- Classification
- J 61
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Sweep scanning
- 3.2 Sweep curve scanningcurve
- 3.3 Aging time and aging curve agingtime
- 3.4 Traces trackingcurve
1 Scope
This standard specifies the terms and definitions mechanical vibration aging device, basic parameters, technical requirements, test methods and inspection rules and
Packaging, labeling and storage and transportation.
This standard applies to carbon steel, low alloy steel, stainless steel, cast iron, non-ferrous metals (copper, aluminum, titanium and its alloys) and other materials casting , Forgings, welded parts, molds, machined parts for the processing target mechanical vibration aging device (hereinafter referred to as a "means").
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB 5226.1 mechanical and electrical safety of machinery - Electrical equipment - Part 1. General requirements
GB/T 6388 transport package shipping mark
GB/T 9969 General Instructions industrial products
GB/T 13384 mechanical and electrical products packaging General technical conditions
GB/T 17626.2 test and measurement techniques - Electrostatic discharge immunity test
GB/T 17626.4-2008 test and measurement techniques - electrical fast transient burst immunity test
JB/T 3000 model designation of foundry equipment
Determination of JB/T 6331.2 casting machinery noise sound pressure level measurement
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Sweep scanning
Fixed eccentric moment, the exciter high speed from a low-key process.
3.2 Sweep curve scanningcurve
Frequency exciting means uniform rise from low to high speed process, the workpiece is detected acceleration value point of speed change with the excitation frequency or exciter
Sweep of the curve called the curve, an abbreviated curve, where, a is the acceleration (unit. m/s2); n is exciter speed (unit. r/min).
3.3 Aging time and aging curve agingtime
When the exciter speed stabilized at a certain value, the duration of time is called aging; meantime, reflecting the acceleration of aging time change
Of the curve, the curve is called aging, denoted at the curve, where, a is an acceleration (unit. m/s2), t is the aging time (unit. min).
3.4 Traces trackingcurve
Aging initial frequency acceleration is a fixed value, the control value of the acceleration in the aging process remains the same, the need to constantly adjust the laser
GB/T 39957-2021 | GB/T 37371-2019 | GB/T 37365-2019 | GB/T 25715-2023 | GB/T 25711-2023 | GB/T 25716-2022 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 25713-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 25713-2010
$165.00