GB/T 25684.3-2021Earth-moving machinery - Safety - Part 3: Requirements for loaders (English PDF)

foreword

This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents"

drafted:

This document is part 3 of GB/T 25684 "Earth-moving Machinery Safety": GB/T 25684 has released the following parts:

--- Part 1: General requirements;

--- Part 2: Requirements for bulldozers;

--- Part 3: Requirements for loaders;

--- Part 4: Requirements for backhoe loaders;

--- Part 5: Requirements for hydraulic excavators;

--- Part 6: Requirements for dump trucks;

--- Part 7: Requirements for scrapers;

--- Part 8: Requirements for motor graders;

--- Part 9: Requirements for pipelayers;

--- Part 10: Requirements for trenchers;

--- Part 11: Requirements for backfill compactors;

--- Part 12: Requirements for mechanical excavators;

--- Part 13: Requirements for road rollers:

This document replaces GB 25684:3-2010 "Earth-moving Machinery Safety Part 3: Requirements for Loaders", and GB 25684:3-

Compared with:2010, in addition to structural adjustment and editorial changes, the main technical changes are as follows:

a) Some terms and definitions have been changed (see 3:1~3:4, 3:1~3:4 of the:2010 edition);

b) Deleted the term and definition of "hydraulic lifting capacity" (see 3:5 of the:2010 edition);

c) Change "safety requirements and/or protective measures" to "safety requirements and protective measures" (see Chapter 4, Chapter 4 of the:2010 edition);

d) The contents of "loader with front aisle" and "driver's seat" were deleted (see 4:2 and 4:3 of the:2010 edition);

e) Changed the provisions of the rear window (see 4:2, 4:4 of the:2010 edition);

f) Changed the general requirements for stability (see 4:4:1, 4:6:1 of the:2010 edition);

g) The relevant requirements for rollover protection structures, falling object protection structures, fenders and restraint systems for machines with front access have been deleted (see:2010

4:5:1~4:5:3 and 4:5:6 of the year edition);

h) Changed "guards for loaders with front access" to "guards for loaders" and added Note (see 4:3:2,:2010

version 4:5:5);

i) Changed the table of stability factor for fork conditions (see Table 1, Table 1 of the:2010 edition);

j) Deleted the contents of hydraulic lifting capacity, rated working load, fork size and handling attachments (see:2010 edition 4:6:3:3~4:

6:3:5, 4:6:4:3, 4:6:4:4, 4:6:5:3~4:6:5:5, 4:6:6:3 and 4:6:6:4);

k) The verification of safety requirements and/or protective measures has been deleted (see Chapter 5 of the:2010 edition):

This document is equivalent to ISO 20474-3:2017 "Safety of Earth-moving Machinery Part 3: Requirements for Loaders":

Please note that some content of this document may be patented: The issuing agency of this document assumes no responsibility for identifying patents:

Introduction

This document is a Type C standard defined by ISO 12100:

The scope of this document describes the machinery involved and the scope of the hazards, hazardous states or hazardous events involved:

Since the design and manufacture of the machine follow the requirements of Class C standards, when the requirements of Class C standards are different from those of Class A or Class B standards

At the same time, the requirements of Class C standards take precedence over other standards:

GB/T 25684 "Earth-moving Machinery Safety" is a basic and universal standard that guides my country's earth-moving machinery products to meet relevant safety requirements:

allow: GB/T 25684 aims to establish general safety requirements applicable to earth-moving machinery products and special safety requirements for specific machine families

It is proposed to consist of 14 parts:

--- Part 1: General requirements: The purpose is to establish general safety requirements applicable to all machine types in the earthmoving machinery industry:

The foundational standard for a full range of standards:

--- Part 2: Requirements for bulldozers: The purpose is to propose specific products that meet the unique characteristics of bulldozer products:

Security Requirements Clause:

--- Part 3: Requirements for loaders: The purpose is to propose specific products that meet the characteristics of their own products according to the unique characteristics of loader products:

Security Requirements Clause:

--- Part 4: Requirements for backhoe loaders: The purpose is to propose a product that meets the unique characteristics of backhoe loader products:

Point-specific security requirements clause:

--- Part 5: Requirements for hydraulic excavators: The purpose is to put forward the unique characteristics of hydraulic excavator products that meet the characteristics of their own products:

Point-specific security requirements clause:

--- Part 6: Requirements for dump trucks: The purpose is to propose specific products that meet the unique characteristics of dump truck products:

Security Requirements Clause:

--- Part 7: Requirements for scrapers: The purpose is to propose specific products that meet the characteristics of their own products according to the unique characteristics of scraper products:

Security Requirements Clause:

--- Part 8: Motor grader requirements: The purpose is to propose specific products that meet the unique characteristics of motor graders:

Security Requirements Clause:

--- Part 9: Requirements for pipelayers: The purpose is to propose specific products that meet the unique characteristics of the pipelayer products:

Security Requirements Clause:

--- Part 10: Requirements for trenchers: The purpose is to propose special features that conform to the characteristics of the trencher products according to the unique characteristics of the trencher products:

Security requirements clauses:

--- Part 11: Requirements for backfill compactors: The purpose is to propose products that meet the unique characteristics of backfill compactor products:

Features specific security requirements clause:

--- Part 12: Requirements for mechanical excavators: The purpose is to propose products that meet the unique characteristics of mechanical excavators:

Features specific security requirements clause:

--- Part 13: Requirements for road rollers: The purpose is to propose special characteristics that meet the characteristics of the rollers according to the unique characteristics of the road roller products:

Security requirements clauses:

--- Part 14: Requirements for small implement carriers: The purpose is to put forward a proposal to meet the unique characteristics of small implement carrying machine products:

Specific safety requirements clauses for their own product features:

The safety requirements of Part 2 to Part 14 are used in conjunction with the general requirements of Part 1 to better meet the use requirements:

Earthmoving Machinery Safety

Part 3: Requirements for loaders

1 Scope

This document specifies the safety requirements for loaders as defined by ISO 6165; specifies requirements for earth-moving machinery for

All major hazards, hazardous states and hazardous events related to it when applied under conditions of misoperation (see the appendix of GB/T 25684:

Record A); and specifies techniques for eliminating or reducing risks arising from significant hazards, hazardous states or hazardous events in use, operation and maintenance

measure:

This document is used in conjunction with GB/T 25684:1 (specifying general safety requirements for two or more families of earth-moving machinery): of this document

Specific requirements take precedence over the general requirements of GB/T 25684:1:

This document does not apply to machines manufactured prior to the implementation of this document:

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, dated citations

documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to

this document:

GB/T 10175:1-2008 Earth-moving machinery loaders and backhoe loaders - Part 1: Calculation and verification of rated working load

Test method for calculated values of tipping loads (ISO 14397-1:2007, IDT)

GB/T 25684:1-2021 Earthmoving Machinery Safety Part 1: General Requirements (ISO 20474-1:2017, IDT)

ISO 2330 Forklift truck forks technical requirements and test methods (Fork-lifttrucks-Forkarms-Technicalcharac-

teristics and testing)

Note: GB/T 5182-2008 Technical requirements and test methods for forks of forklift trucks (ISO 2330:2002, IDT)

ISO 5353 Earth-moving machinery, agricultural and forestry tractors and machinery driver seat calibration points (Earth-movingmachinery, and

tractorsandmachineryforagricultureandforestry-Seatindexpoint)

Note: GB/T 8591-2000 Earth-moving machinery driver seat calibration point (eqvISO 5353:1995)

ISO 6016 Earth-moving machinery and its working devices and components of quality measurement methods (Earth-movingmachinery-

Methodsofmeasuringthemassesofwholemachines,theirequipmentandcomponents)

Note: GB/T 21154-2014 Earth-moving machinery and its working devices and components of quality measurement methods (ISO 6016:2008, IDT)

ISO 6165 Earth-moving machinery basic types identification, terms and definitions (Earth-movingmachinery-Basictypes-

Identificationandtermsanddefinitions)

Note: GB/T 8498-2017 Earth-moving machinery basic type identification, terms and definitions (ISO 6165:2012, IDT)

ISO 7131 Terminology and commercial specifications for earth-moving machinery loaders (Earth-movingmachinery-Loaders-Terminol-

ogyandcommercialspecifications)

Note: GB/T 25604-2017 Terminology and commercial specifications for earth-moving machinery loaders (ISO 7131:2009, IDT)

ISO 7546 Bucket capacity calibration for earth-moving machinery loaders and front shovels (Earth-movingmachinery-

Loaderandfrontloadingexcavatorbuckets-Volumetricratings)

Note: GB/T 21942-2008 Bucket capacity calibration of earth-moving machinery loaders and front shovel excavators (ISO 7546:1983, MOD)

ISO 14397-1 Earth-moving machinery loaders and backhoe loaders - Part 1: Calculation and verification of rated working load tipping loads