GB/T 25616-2010Earth-moving machinery -- Auxiliary starting aid electrical connector (English PDF)

Foreword

This standard is identical with ISO 11862:1993 "electrical connection of earth-moving machinery starting aid" (in English).

This standard is equivalent to translate ISO 11862:1993.

For ease of use, this standard made the following editorial changes.

--- "This International Standard" be replaced by "this standard";

--- Instead of using the decimal point as a decimal point ",". ",";

--- Figure 3 footnote number in the form of "1)" to "a";

--- Of ISO 11862:1993 international standard referenced with the international standard has been adopted as a standard in place of the corresponding;

--- Remove the foreword to international standards.

The standard proposed by China Machinery Industry Federation.

This standard by the national earthmoving machinery Standardization Technical Committee (SAC/TC334) centralized.

1 Scope

This standard specifies the plugs and sockets graphics, size, design, they must be able to cooperate fully in order to meet the different configurations of electrical connectors (T 8498 defined earthmoving machinery to provide connectivity to the auxiliary starting circuit of GB /) requirements can interactively use. This standard has positive Correct polarity connection means universal, standard coding circuit and short circuit protection provisions made, and can be used on the same circuit voltage range of other machines Machinery, vehicles or mobile equipment.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 3956-2008 conductor cable (IEC 60228:2004, IDT) GB/T 5013.4-2008 rated voltage of 450/750V and below rubber insulated cables Part 4. Cords and flexible cables (IEC 60245-4:2004, IDT) GB/T 8498 Earth - moving machinery - Basic types - Identification and terms and definitions (GB/T 8498-2008, ISO 6165:2006, IDT) GB/T 13539.1 low-voltage fuses - Part 1. General requirements (GB/T 13539.1-2008, IEC 60269-1:2006, IDT) GB/T 22353 earthmoving machinery wires and cables of identification and marking (GB/T 22353-2008, ISO 9247:1990, IDT)

3 General requirements

4 Construction