GB/T 25443-2010Portable spot welding machines (English PDF)
移动式点焊机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 25443-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 10, 2010
Implementation date
May 1, 2011
Scope
GB/T 25443-2010 is the English-translated version of 移动式点焊机.
GB/T 25443-2010 is the Chinese standard "Portable spot welding machines". Its scope clause reads: This standard specifies the mobile spot welding (hereinafter referred to as welder) general technical requirements, test methods and inspection rules.
Voltage power supply or by a mechanical device driven welder This standard applies to not more than GB/T 156-2007 specified in Table 1, including single Single and multi-station welding machine used.
Resistance welding machine controller (hereinafter referred to as the controller) and the welder can form as a whole, it can also be separated into a separate device, but whether to take what Structural forms that are applicable to this standard.
NOTE. This standard does not include electromagnetic compatibility (EMC) requirements. Its clauses include terms and definitions; categories and models.
Found what you need?
Document preview — GB/T 25443-2010
National Standard of the People's Republic of China
- ICS
- 25.160.30
- Classification
- J 64
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Categories and models
1 Scope
This standard specifies the mobile spot welding (hereinafter referred to as welder) general technical requirements, test methods and inspection rules.
Voltage power supply or by a mechanical device driven welder This standard applies to not more than GB/T 156-2007 specified in Table 1, including single
Single and multi-station welding machine used.
Resistance welding machine controller (hereinafter referred to as the controller) and the welder can form as a whole, it can also be separated into a separate device, but whether to take what
Structural forms that are applicable to this standard.
NOTE. This standard does not include electromagnetic compatibility (EMC) requirements.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 156-2007 standard voltage (IEC 60038.2002, MOD)
GB/T 2900.22 Electrotechnical terminology Welder
GB/T 8366-2004 solder resistance welding machine for mechanical and electrical requirements (ISO 669.2000, MOD)
GB 10249 Welder Model Methodology
GB 15578-2008 Safety requirements for resistance welding machine
3 Terms and Definitions
GB/T 2900.22, GB/T 8366-2004, terms and definitions established in GB 15578-2008 apply to this standard.
4 Categories and models
4.1 Categories
4.1.1
The form of the structure is divided into welding a) hanging spot welder;
b) Hand-held spot welder.
4.1.2 welder divided according to type of use
a) mobile spot welding;
b) spot welding robot welding tongs.
4.1.3
divided by input power phase number.
a) single-phase spot welding;
b) Three-phase spot welder.
4.1.4
divided according to the principle.
a) frequency spot welding;
b) rectifying spot welder;
c) inverter spot welder;
d) capacitive discharge spot welder.
4.1.5
according to the working frequency is divided into.
a) frequency spot welding;
b) IF spot welding;
GB/T 41861-2022 | GB/T 40337-2021 | CNCA C06-01-2014 | GB/T 15579.12-2026 | GB/T 15579.11-2026 | GB 15578-2026 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 25443-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 25443-2010
$85.00