Valid

GB/T 25310-2010Stationary spot welding machines and projection welding machines (English PDF)

固定式点、凸焊机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 25310-2010 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 10, 2010

Implementation date

May 1, 2011

Scope

GB/T 25310-2010 is the English-translated version of 固定式点、凸焊机.

GB/T 25310-2010 is the Chinese standard "Stationary spot welding machines and projection welding machines". Its scope clause reads: This standard specifies a fixed point, general technical requirements for projection welding machine, test methods and inspection rules.

This standard applies to the power supply voltage does not exceed GB/T 156-2007 specified in Table 1 or by a mechanical device drivers for various types of fixed Spot, projection welding (hereinafter referred to as welder).

Resistance welding machine controller (hereinafter referred to as the controller) and the welder can form as a whole, it can also be separated into a separate device, but whether to take what Structural forms that are applicable to this standard.

NOTE. This standard does not include electromagnetic compatibility (EMC) requirements. Its clauses include terms and definitions; categories and models; conditions of use.

Found what you need?

Document preview — GB/T 25310-2010

National Standard of the People's Republic of China

ICS: 25.160.30
Classification: J 64

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

1 Scope
2 Normative references
3 Terms and Definitions
4 Categories and models
5 conditions of use

1 Scope

This standard specifies a fixed point, general technical requirements for projection welding machine, test methods and inspection rules.

This standard applies to the power supply voltage does not exceed GB/T 156-2007 specified in Table 1 or by a mechanical device drivers for various types of fixed

Spot, projection welding (hereinafter referred to as welder).

Resistance welding machine controller (hereinafter referred to as the controller) and the welder can form as a whole, it can also be separated into a separate device, but whether to take what

Structural forms that are applicable to this standard.

NOTE. This standard does not include electromagnetic compatibility (EMC) requirements.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 156-2007 standard voltage (IEC 60038.2002, MOD)

GB/T 2900.22 Electrotechnical terminology Welder

GB/T 8366-2004 solder resistance welding machine for mechanical and electrical requirements (ISO 669.2000, MOD)

GB/T 10249 Welder Model Methodology

GB 15578-2008 Safety requirements for resistance welding machine

JB/T 3158 Straight resistance spot welding electrodes

JB/T 3946 projection welding electrode plates trough

JB/T 3947 resistance spot welding electrode tab

JB/T 3948 resistance spot welding electrode caps

JB/T 4281 resistance welding electrode materials and accessories

JB/T 5256 welding inspection and sampling method

3 Terms and Definitions

GB/T 2900.22, GB/T 8366-2004, terms and definitions established in GB 15578-2008 apply to this standard.

4 Categories and models

4.1 Classification

By welding electrode movement is divided into the following two kinds.

a) circular motion type;

b) vertical movement style.

4.2 Model

Welder model according to GB/T 10249 standard preparation.

5 conditions of use

5.1 Environmental conditions

Meet the requirements of this standard shall be capable of welding work under the following environmental conditions.

GB/T 41861-2022 | GB/T 40337-2021 | CNCA C06-01-2014 | GB/T 25301-2021 | GB/T 25305-2010 | GB/T 25300-2010 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

GB/T 2550-2025|GB/T 10235-2012|GB/T 10249-2010|GB/T 13165-2010|GB/T 25298-2010|GB/T 25305-2010

How to Download GB/T 25310-2010

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.