GB/T 24962-2026Refrigerated hydrocarbon liquids - Static measurement - Calculation procedure (English PDF)
冷冻烃类流体 静态测量 计算方法
Also coversGB/T24962-2026 + GBT24962-2026
This is a limited preview
Buy now to download the full PDF (25 pages)
Need quotation for your management?
Get a formal quotation for GB/T 24962-2026 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 28, 2026
Implementation date
April 1, 2027
Scope
GB/T 24962-2026 is the English-translated version of 冷冻烃类流体 静态测量 计算方法.
This standard sets out a calculation procedure for the static measurement of refrigerated hydrocarbon liquids, such as liquefied gases held in storage tanks. Static measurement concerns determining the quantity held in a tank, and the document covers the computing side of that task. It adopts an international standard.
Terminal operators, custody transfer surveyors, independent inspectors, shipping and trading companies and tank gauging system suppliers are the typical users, since consistent calculation is central to commercial quantity settlement. The standard is a recommended national standard (GB/T) and replaces GB/T 24962-2010, so organizations that cite the older edition in contracts or procedures should consider updating them.
Importers and exporters handling cargoes of this kind in Chinese terminals will find the current edition relevant when reconciling quantities between parties. It becomes effective on 1 April 2027.
Found what you need?
Document preview — GB/T 24962-2026
National Standard of the People's Republic of China
- ICS
- 75.060
- Classification
- E 24
- Replacing
- GB/T 24962-2010
Issued by: State Administration for Market Regulation; Standardization Administration of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
Foreword
GB/T 24962-2026 is a recommended national standard (GB/T) of the People's Republic of China, issued on 28 September 2026 by the State Administration for Market Regulation and the Standardization Administration of China, with effect from 1 April 2027.
This edition replaces GB/T 24962-2010.
The document adopts an international standard (ISO or IEC).
It is under the responsibility of the Standardization Administration of China.
Classification: ICS 75.060; CCS E 24.
1 Scope
This standard sets out a calculation procedure for the static measurement of refrigerated hydrocarbon liquids, such as liquefied gases held in storage tanks. Static measurement concerns determining the quantity held in a tank, and the document covers the computing side of that task. It adopts an international standard.
Terminal operators, custody transfer surveyors, independent inspectors, shipping and trading companies and tank gauging system suppliers are the typical users, since consistent calculation is central to commercial quantity settlement. The standard is a recommended national standard (GB/T) and replaces GB/T 24962-2010, so organizations that cite the older edition in contracts or procedures should consider updating them.
Importers and exporters handling cargoes of this kind in Chinese terminals will find the current edition relevant when reconciling quantities between parties. It becomes effective on 1 April 2027.
Remaining clauses in the full document
- 2 Normative references
- 3 Terms and definitions
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 25 pages — is available in the English PDF.
Referenced standards
Editions of GB/T 24962
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 24962-2026 | Refrigerated hydrocarbon liquids - Static measurement - Calculation procedure | current edition | Current |
| GB/T 24962-2010 | Refrigerated hydrocarbon liquids - Static measurement - Calculation procedure | previous edition | In force until 1 April 2027 |
This page sells the current edition, GB/T 24962-2026. Earlier editions are listed for reference only.
How to Download GB/T 24962-2026
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 24962-2026
$450.00