GB/T 24777-2009Safety specification for physico-chemical and dangerous properties testing laboratory of chemicals (English PDF)

3.1 General requirements

3.1.1

To ensure the safe operation of the laboratory, the laboratory shall develop a detailed, operational safety management system, responsibilities to the people, so

Fire, explosion, anti-virus and anti-theft.

3.1.2

Depending on the nature of the different laboratories, in accordance with national security standards, good sound, light, electricity, magnetism, microwave ray tubes and other equipment

Management, strict implementation of practices to prevent all kinds of accidental disclosure.

3.1.3

The laboratory building should be a secondary fire resistance rating, fire spacing, safety exit, etc. should meet the requirements of GB 50016, involving explosion

Product testing laboratories shall comply with GB 50089 requirements.

3.1.4

flammable, explosive, vapors and gases Laboratory dissipation, electrical equipment shall comply with the explosion. Measurement, control and laboratory electricity

Safety requirements for gas equipment shall comply with the relevant provisions of GB 4793, the explosive gas environment with electrical equipment shall comply with the requirements of GB 3836.

3.1.5

Laboratory mine design should meet the requirements of GB 50057.

3.1.6

involving explosives, flammable liquids, flammable gases and other flammable materials equipment, console, etc. should be taken to the ground, an inert gas

Protection, installation guide body static devices in addition to anti-static measures.

3.1.7

The laboratory shall carry obvious dangers identification (such as international common toxic, harmful, dangerous and logo) in place.

3.1.8

Laboratory staff should be pre-job safety education, and knowledge of chemical safety training every year.

3.1.9

The laboratory shall occur according to laboratory accidents, develop laboratory procedures or emergency treatment plan, such as a radioactive, toxic,

Harmful gases and corrosive substances leaking; significant hazardous substance detected, sample processing.

3.1.10

laboratory should be equipped with appropriate fire-fighting equipment according to the type of fire that may occur, and organize relevant personnel to exercise regularly.

3.2 management of dangerous chemicals

3.2.1

hazardous chemicals including explosives, flammable aerosols, oxidising gases, under pressure of the gas, flammable liquids, flammable solids, self-reactive substance

GB 23350-2021 | GB/T 27842-2011 | GB/T 25322-2010 | GB/T 24778-2009 | GB/T 24776-2009 | GB/T 24775-2009 | […]