GB/T 24659.3-2009Agricultural crawler tractors - Support roller - Requirement (English PDF)
农业履带拖拉机 支重轮 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 24659.3-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 15, 2009
Implementation date
May 1, 2010
Scope
GB/T 24659.3-2009 is the English-translated version of 农业履带拖拉机 支重轮 技术条件.
GB/T 24659.3-2009 is the Chinese standard "Agricultural crawler tractors - Support roller - Requirement". Its scope clause reads: This section GB/T 24659 specifies the technical requirements for agricultural crawler tractors rollers, test methods, inspection rules, marks, packages Loading, transport and storage.
This section applies to agricultural crawler tractors rollers (hereinafter referred to as rollers). Its clauses include technical requirements.
Found what you need?
Document preview — GB/T 24659.3-2009
National Standard of the People's Republic of China
- ICS
- 65.060.10
- Classification
- T 64
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
1 Scope
This section GB/T 24659 specifies the technical requirements for agricultural crawler tractors rollers, test methods, inspection rules, marks, packages
Loading, transport and storage.
This section applies to agricultural crawler tractors rollers (hereinafter referred to as rollers).
2 Normative references
The following documents contain provisions which, through reference GB/T 24659 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 222 chemical composition of finished steel tolerance
GB/T 223 (all parts), steel and alloy chemical analysis method
GB/T 228 metal materials at room temperature tensile test method (GB/T 228-2002, eqvISO 6892.1998)
GB/T 230.1 metallic materials - Rockwell hardness test - Part 1. Test methods (A, B, C, D, E, F, G, H, K, N, T standard
Feet) (GB/T 230.1-2009, ISO 6508-1.2005, MOD)
GB/T 231.1 metallic materials Brinell hardness test - Part 1. Test method (GB/T 231.1-2009, ISO 6506-1.
2005, MOD)
GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan (GB/T 2828.1-2003, ISO 2859-1.1999, IDT)
GB/T 3871.12 Agricultural tractors - Test procedures - Part 12. Test
GB/T 5617 steel induction hardening or flame hardening after the effective hardened layer depth measurement (GB/T 5617-2005, ISO 3754.
1976, NEQ)
GB/T 6414-1999 casting dimensional tolerances and machining allowances (eqvISO 8062.1994)
GB/T 11351-1989 casting weight tolerance
JB/T 5673-1991 agricultural and forestry tractors and machinery paint general technical conditions
3 Technical requirements
3.1
wheels shall comply with the provisions of this section and procedures approved by the drawings and technical documents of products manufactured in accordance with prescribed.
3.2
material recommended ZG45Mn steel table or in compliance with the chemical composition and mechanical properties of a set of carbon steel casting, ensuring the strength and use
Under the conditions of life, to allow the use of other brands of material.
Table 1
Chemical composition of a /% Mechanical properties
C Mn Si S P Tensile strength Rm/MPa Elongation A /%
0.40 ~ 0.50 0.70 ~ 1.10 0.30 ~ 0.60 <=0.06 <=0.06 >=570 >=12
A residual content of chemical elements shall be as follows (%, <=). Ni0.30, Cr0.35, Cu0.30, Mo0.10, V0.05, and the total does not exceed
1.00%. Deviation of the chemical composition of the finished product shall comply with GB/T 222's.
GB/T 39899-2021 | GB/T 21958-2017 | CNCA C11-06-2014 | GB/T 24657-2009 | GB/T 24659.4-2009 | GB/T 24659.2-2009 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 24659.3-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 24659.4-2009 — Agricultural crawler tractors - Metal track - Requirement
GB/T 24659.2-2009 — Agricultural crawler tractors - Track idler - Requirement
GB/T 24659.1-2009 — Agricultural crawler tractors - Track idler - Requirement
Secure payment via Stripe
Payments accepted
GB/T 24659.3-2009
$105.00