Valid

GB/T 24512.1-2009Seamless steel tubes and pipes for nuclear power plant - Part 1: Carbon steel seamless tubes and pipes (English PDF)

核电站用无缝钢管 第1部分:碳素钢无缝钢管

Preview PDF

This is a limited preview

Buy now to download the full PDF (17 pages)

Need quotation for your management?

Get a formal quotation for GB/T 24512.1-2009 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 30, 2009

Implementation date

June 1, 2010

Scope

GB/T 24512.1-2009 is the English-translated version of 核电站用无缝钢管 第1部分:碳素钢无缝钢管.

GB/T 24512.1-2009 is the Chinese standard "Seamless steel tubes and pipes for nuclear power plant - Part 1: Carbon steel seamless tubes and pipes".

Its scope clause reads: GB 24512 of the provisions of this part of the nuclear power plant with carbon steel seamless pipe classification, code, size, shape, weight and tolerances, technical Operation requirements, test methods, inspection rules, packaging, labeling and quality report.

This section applies to the manufacture of nuclear power plants 1,2,3 and non-nuclear pressure equipment parts Seamless carbon steel (including carbon manganese steel).

Its clauses include classification and designation; ordering content; size, shape, weight and tolerance; technical requirements; hd245 410 ~ 550 >=245 >=24 >=22; hd245cr 410 ~ 550 >=245 >=24 >=22; hd265 410 ~ 570 >=265 >=23 >=21; hd265cr 410 ~ 570 >=265 >=23 >=21; hd280 470 ~ 590 >=275 >=21 >=21; hd245.

Found what you need?

Document preview — GB/T 24512.1-2009

National Standard of the People's Republic of China

ICS
77.140.75
Classification
H 48

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 5.1.2,5.2.2,5.3.1.2,5.3.2.1,5.5,5.7,6.1.2,6.1.3 this section , 6.2.2.2,6.3.2,6.7,6.14.2,
  • 1 Scope
  • 2 Normative references

1 Scope

GB 24512 of the provisions of this part of the nuclear power plant with carbon steel seamless pipe classification, code, size, shape, weight and tolerances, technical

Operation requirements, test methods, inspection rules, packaging, labeling and quality report.

This section applies to the manufacture of nuclear power plants 1,2,3 and non-nuclear pressure equipment parts Seamless carbon steel (including carbon manganese steel).

2 Normative references

The following documents contain provisions which, through reference in this Part of GB 24512, constitute provisions of this part. For dated reference documents

Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section

Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.

GB/T 222 chemical composition of finished steel tolerance

GB/T 223.5 steel Determination of total soluble silicon and silicon content reduced silicon molybdate salt spectrophotometric method (GB/T 223.5-

2008, ISO 4829-1. 1986, ISO 4829-2. 1988, MOD)

GB/T 223.9 steel and aluminum alloys - Determination of chromium content Azure S Spectrophotometry

Determination of GB/T 223.11 steel and alloy chromium content of visual titration or potentiometric titration (GB/T 223.11-2008,

ISO 4937. 1986, MOD)

GB/T 223.12 Methods for chemical analysis of iron, steel and alloys of sodium carbonate separation - diphenyl hydrazine spectrophotometric determination of chromium content

GB/T 223.14 Methods for chemical analysis of iron, steel and alloys, tantalum reagent extraction and spectrophotometric determination of vanadium content

Spectrophotometric determination of titanium content GB/T 223.16 Methods for chemical analysis of iron, steel and alloy The chromotropic acid

GB/T 223.18 Methods for chemical analysis of iron, steel and alloy The sodium thiosulfate separation - determination of copper content Iodometry

GB/T 223.23 steel and alloy - Determination of nickel content dimethylglyoxime spectrophotometry

GB/T 223.26 steel and alloy - Determination of molybdenum content - Thiocyanate spectrophotometric

GB/T 223.29 steel and alloys of lead content measured carrier precipitation - xylenol orange spectrophotometric method

223.31 Steel Determination GB/T and alloy distillation of arsenic content - Molybdenum blue spectrophotometric method (GB/T 223.31-2008,

ISO 17058.2004, IDT)

GB/T 223.40 Determination of steel and alloy niobium content sulphochlorophenol S spectrophotometry

GB/T 223.50 Methods for chemical analysis of iron, steel and alloy Phenylfluorone - Direct spectrophotometric determination of cetyl trimethyl ammonium bromide

Tin

GB/T 223.53 Methods for chemical analysis of iron, steel and alloys by flame atomic absorption spectrophotometric method for determination of copper content (GB/T 223.53-

1987, eqv ISO /DIS4943. 1986)

GB/T 223.54 Methods for chemical analysis of iron, steel and alloys by flame atomic absorption spectrophotometric method for determination of nickel content (GB/T 223.54-

1987, eqv ISO /DIS4940. 1986)

GB/T 223.58 Methods for chemical analysis of iron, steel and alloys of sodium arsenite - sodium nitrite determination of manganese content titration

GB/T 223.59 Steel and Alloy Determination of phosphorus content by bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometry

GB/T 223.60 Methods for chemical analysis of iron, steel and alloy perchloric acid dehydration gravimetric method for the determination of silicon content

GB/T 223.62 Methods for chemical analysis of iron, steel and alloy butyl acetate extraction spectrophotometric determination of phosphorus content

GB/T 223.63 Methods for chemical analysis of iron, steel and alloy The sodium (potassium) for Determination of amount

GB/T 223.64 steel and alloy manganese content - Flame atomic absorption spectrometric method (GB/T 223.64-2008,

ISO 10700.1994, IDT)

GB/T 223.67 steel and alloy sulfur content - Methylene blue spectrophotometric method (GB/T 223.67-2008,

ISO 10701.1994, IDT)

Determination of sulfur content of potassium iodate titration method after GB/T 223.68 Methods for chemical analysis of iron, steel and alloy tube furnace combustion

GB/T 223.69 after carbon and alloy steel - Determination of the pipe furnace combustion gas volumetric method

After the determination of carbon content - Gravimetric method GB/T 223.71 Methods for chemical analysis of iron, steel and alloy tube furnace combustion

GB/T 223.72 steel and alloy sulfur content - Gravimetric method

GB/T 223.76 Methods for chemical analysis of iron, steel and alloys by flame atomic absorption spectrometry of vanadium content

GB/T 223.78 Methods for chemical analysis of iron, steel and alloy Curcumin spectrophotometric determination of boron content directly (GB/T 223.78-2000, idt ISO 10153.1997)

GB/T 224 Determination of depth of decarburization of steel method (GB/T 224-2008, ISO 3887.2003, MOD)

GB/T 226 steel macrostructure and defect etching test method (GB/T 226-1991, neq ISO 4969. 1980)

GB/T 228 metal materials at room temperature tensile test method (GB/T 228-2002, eqv ISO 6892.1998)

GB/T 229 metal Charpy pendulum impact test method (GB/T 229-2007, ISO 148-1.2006, MOD)

GB/T 232 metallic materials - Bend test (GB/T 232-1999, eqv ISO 7438. 1985)

GB/T 241 metal pipe Hydrostatic pressure testing

GB/T 242 Test Method metal tube expansion port (GB/T 242-2007, ISO 8493.1998, IDT)

GB/T 246 metal pipe flattening test method (GB/T 246-2007, ISO 8492.1998, IDT)

GB/T 1979 structure steel macrostructure and defect rating FIG.

GB/T 2102 Acceptance, packing, marking and quality certification

GB/T 2975 Steel and steel products for mechanical testing location and sample preparation (GB/T 2975-1998, eqv ISO 377.

1997)

GB/T 4336 carbon steel and low alloy steel spark source atomic emission spectrometry method (conventional method)

GB/T 4338 high-temperature metallic materials - Tensile testing (GB/T 4338-2006, ISO 783.1999, MOD)

GB/T 5777-2008 Seamless Steel ultrasonic testing method (ISO 9303. 1989, Seamlessandwelded (except submergedarc-welded) steeltubesforpressurepurposes-fulperipheralultrasonictestingforthede- tectionoflongitudinalimperfections, MOD)

GB/T 6394 Determination of average grain size of metal (GB/T 6394-2002, ASTME112.1996, MOD)

GB/T 7735 steel pipe eddy current testing method (GB/T 7735-2004, ISO 9304. 1989, MOD)

GB/T 10561 Steel - Determination of content of nonmetallic inclusions standards diagrams microscopic examination method (GB/T 10561-2005,

ISO 4967.1998, IDT)

GB/T 12606 pipe magnetic flux leakage inspection method (GB/T 12606-1999, eqv ISO 9402. 1989; ISO 9598. 1989)

GB/T 13298 metal microstructure inspection method

GB/T 15822 (all parts), non-destructive testing magnetic particle testing

GB/T 17395 seamless steel pipe size, shape, weight and tolerances (GB/T 17395-2008, ISO 4200.1991,

ISO 5252.1991, ISO 1127.1992, NEQ)

GB/T 17505 Steel and steel products General technical delivery requirements (GB/T 17505-1998, eqv ISO 404.1992)

GB/T 20066 Steel and iron - Sampling and determination of the chemical composition of the sample with a sample preparation method (GB/T 20066-2006, ISO 14284.

1996, IDT)

GB/T 20123 Steel - Determination of total carbon and sulfur content of the high-frequency induction furnace combustion infrared absorption method (conventional method) (GB/T 20123-2006, ISO 15350.2000, IDT)

Inductively coupled plasma atomic GB/T 20125 low-alloy steel multielement emission spectrometry

GB/T 20490 Seamless and welded (except submerged arc welded) steel tubes layered ultrasonic testing (GB/T 20490-2006,

ISO 10124.1994, MOD)

JB/T 4730.5 Non-destructive testing of pressure equipments - Part 5. penetrant testing

YB/T 4149 casting tube round

YB/T 5137 high-pressure hot-rolled and forged seamless steel tube round

3 Classification and designation

3.1

part by seamless steel pipe manufacturing is divided into two categories, their category and code are as follows.

a) hot-rolled (extrusion, top, forging, expansion) steel, codenamed W-H;

b) cold drawn (rolled) steel pipe, codenamed W-C.

Seamless Steel 3.2 part by dimensional accuracy divided into two categories, their category and code are as follows.

a) ordinary level precision, code-named PA;

b) High precision, code-named PC.

3.3

The following codes apply to this part.

D outer diameter (nominal diameter, unless otherwise specified or the calculated diameter, is calculated nominal diameter or outside diameter)

S wall thickness (unless otherwise specified nominal wall thickness or minimum thickness, is the nominal wall thickness or minimum thickness)

Smin minimum wall thickness 3.4 steel grades representative of nuclear power by the use of Chinese pinyin first in capital letters (HD) and room temperature, under specified minimum yield strength or

Proof strength values of steel composition, control the Cr content should be followed by the chemical symbol Cr.

For example. HD245, HD245Cr among them.

HD --- "nuclear power" Pinyin first in capital letters;

Provisions 245 --- room temperature under minimum yield strength or proof strength value, in megapascals (MPa);

Cr --- chemical element symbol represents the content control Cr steels (Cr content of not less than 0.15%).

4 ordering content

The pipe section ordering contract or order should include the following.

a) the standard number;

b) the product name;

c) nuclear power plants for the manufacture of steel grade, level. 1, 2, or non-nuclear;

d) steel grades;

e) the number of orders (total weight or length);

f) Dimensions;

g) special requirements.

5 size, shape, weight and tolerance

5.1 diameter and wall thickness

5.1.1

nominal diameter steel pipe according to the nominal wall thickness and delivery pipe nominal diameter and nominal wall thickness shall comply with GB/T 17395 of.

5.1.2

According to the requirements, negotiated by both sides, according to pipe nominal diameter and minimum wall thickness, nominal inner diameter and nominal wall thickness or other foot

Inch standard mode of delivery.

According to the requirements, negotiated by both sides, we can supply other than the GB/T 17395 predetermined size of the pipe.

Note. If not otherwise specified nominal wall thickness or minimum thickness, this part of the "wall thickness" is the nominal wall thickness or the minimum wall thickness; unless otherwise specified nominal diameter or count

Operators diameter, this part of the "OD" is the nominal diameter or outside diameter calculated.

5.2 diameter and wall thickness of tolerance

5.2.1

nominal diameter steel pipe according to the nominal wall thickness and delivery, the nominal diameter and nominal wall thickness tolerances shall comply with the provisions in Table 1.

Pipe according to the nominal outside diameter and minimum wall thickness of the delivery, the nominal diameter tolerances shall comply with the requirements of Table 1, the wall thickness deviation should be allowed

In accordance with Table 2.

Specified in Table 1 together.

5.2.2

When the demand side is not specified in the contract pipe size tolerance level, pipe diameter and wall thickness tolerances shall comply with the general level of

Provisions.

According to the requirements, negotiated by both sides, and in the contract, the supply table outside dimensions and tolerances specified in Table 2 1 steel

Tube or other steel pipe inner diameter tolerances.

Table 1 pipe nominal diameter and nominal wall thickness tolerances in millimeters

Manufacturing methods pipe size classification code

Tolerance

Ordinary Level (PA) Advanced (PC)

W-H

Hot-rolled (extrusion, top, forging)

Steel Pipe

Nominal diameter (D)

Nominal wall thickness (S)

<=54 ± 0.40 ± 0.30

> 54 ± 1% D ± 0.75% D

<=4.0 ± 0.45 ± 0.35

> 4.0 to 20

+ 12.5% S

-10% S

± 10% S

> 20

D < 219 ± 10% S ± 7.5% S

D>=219

+ 12.5% S

-10% S

± 10% S

W-H thermal expansion pipe

Nominal diameter (D)

All ± 1% D ± 0.75% D

Nominal wall thickness (S)

Complete

+ 18% S

-10% S

+ 12.5% S

-10% S

Table 1 (continued) millimeters

Manufacturing methods pipe size classification code

Tolerance

Ordinary Level (PA) Advanced (PC)

W-C

Cold drawn (rolled)

Steel Pipe

Nominal diameter (D)

Nominal wall thickness (S)

<=25.4 ± 0.15 -

> 25.4 ~ 40 ± 0.20 -

> 40 ~ 50 ± 0.25 -

> 50 ~ 60 ± 0.30 -

> 60 ± 0.5% D -

<=3.0 ± 0.3 ± 0.2

> 3.0 ± 10% S ± 7.5% S

Table 2 pipe minimum wall thickness tolerances in millimeters

Manufacturing methods classification code thickness range

Tolerance

Ordinary level Advanced

W-H hot-rolled (extrusion, top, forging) steel

Smin<=4.0 +0.9 0

+0.7

Smin > 4.0

+ 25% Smin

+ 22% Smin

W-C cold drawn (rolled) steel pipe

Smin<=3.0 +0.6 0

+0.4

Smin > 3.0

+ 20% Smin

+ 15% Smin

5.3 length

5.3.1 usual length
5.3.1.1

pipe length is generally 4000mm ~ 12000mm.

5.3.1.2

negotiated by both sides, and specified in the contract, the delivery of a length greater than or less than 4000mm 12000mm but not less than

3000mm pipe. Shorter than 4000mm 3000mm pipe but not less than, the number should not exceed the total batch delivery pipe

5% of the amount.

5.3.2 cut length and double length
5.3.2.1

According to the requirements, negotiated by both sides, and in the contract, the length of the pipe can be cut to length or double length delivery.

5.3.2.2

Pipe press cut length delivery, the length tolerances shall comply with the following requirements.

When a) D<=406.4mm, + 15 0 mm;

b) D > when 406.4mm, + 20 0 mm.

5.3.2.3

Pipe press double length delivery, each double length the following provisions shall stay out of the incision margin.

When a) D<=159mm, cut the balance of 5mm ~ 10mm;

b) 159 < When D<=406.4mm, cut the balance of 10mm ~ 15mm;

c) D > When 406.4mm, and the balance of the cut 15mm ~ 20mm.

5.4 curvature

5.4.1

curvature per meter pipe shall be as follows.

a) S<=15mm time, not more than 1.5mm/m;

b) 15mm < when S<=30mm, not more than 2.0mm/m;

c) S > When 30mm, is not greater than 3.0mm/m.

5.4.2

D>=127mm steel pipe, the entire length of the bend should not exceed 0.10% of the total pipe length.

5.5 roundness and uneven thickness

According to the requirements, negotiated by both sides, and specified in the contract, roundness and wall thickness of the pipe shall not exceed the outer diameter, respectively, and no

80% of the wall thickness tolerance.

5.6 tip shape

Pipe ends and pipe end should be perpendicular to the axis, cut burr should be removed.

5.7

wt.

5.7.1 Delivery Weight

Pipe according to nominal diameter and nominal wall thickness or nominal inner diameter and a nominal wall thickness delivery pipe according to the actual weight of the delivery, also according to theoretical weight delivery.

Pipe according to the nominal outside diameter and minimum wall thickness delivery pipe according to the actual weight of the delivery; supply and demand sides negotiated and specified in the contract, also steel

According to theoretical weight delivery.

5.7.2 Calculation of theoretical weight

Steel pipe theoretical weight calculated according to the provisions of GB/T 17395 (density steel press 7.85kg/dm3).

According to the nominal inner diameter and a nominal wall thickness of the delivery pipe, the outer diameter shall be calculated theoretical weight calculation, the calculation is based on the nominal inside diameter of the outer diameter and nominal

The outer diameter of the wall thickness calculated value; press delivery pipe minimum wall thickness should be used to calculate the average thickness of the theoretical weight, which is based on the thickness and the average thickness

Which allows the wall thickness deviation calculated from the average of the maximum and minimum values.

5.7.3 Weight Tolerance

According to the requirements, negotiated by both sides, and in the contract, the delivery pipe theoretical weight of the actual weight and deviation should be consistent as

Under the provisions of.

a) a single pipe. ± 10%;

b) a minimum of 10t each batch of steel pipe. ± 7.5%.

6 Technical Requirements

Grades and chemical composition of the steel 6.1

6.1.1

steel grades and chemical composition (melting component and finished components) shall comply with the requirements of Table 3.

Terminology finished chemical composition, and method of determining the definition should be consistent with the provisions of GB/T 222's.

Unless smelting needs, without the need to agree, it allows you to add elements not mentioned in Table 3 in the steel. The manufacturer shall take all appropriate

Measures to prevent other scrap materials and production processes used in the mechanical properties of steel to weaken and fitness elements into steel.

6.1.2

According to the requirements, negotiated by both sides, and in the contract, in addition to the elements specified in Table 3, further analysis of the chemical composition of the finished product

Boron, lead, arsenic and mercury, and to provide results of its analysis to the demand side.

6.1.3

This section of steel grades and other similar standard grades of steel control See Appendix A.

Book Book Book (quality

) /

Si

Cr

Ni

Al to

Cu

Sn

Ce qb

D2

. 2

. 1

. 3

. 0

. 2

. 1

. 2

. 2

. 0

. 0

. 0

. 0

. 2

. 1

. 3

. 0

. 2

. 1

. 2

. 2

. 0

. 0

. 0

. 0

D2

Cr

. 2

. 1

. 3

. 0

. 2

. 3

. 1

. 2

. 2

. 0

. 0

. 0

. 0

. 2

. 1

. 3

. 0

. 1

. 3

. 1

. 2

. 2

. 0

. 0

. 0

. 0

D2

. 2

. 4

. 4

. 3

. 0

. 3

. 0

. 0

. 2

. 0

. 0

Ti

. 0

. 0

. 0

. 0

. 2

. 4

. 4

. 3

. 0

. 3

. 0

. 0

. 2

. 0

. 0

Ti

. 0

. 0

. 0

. 0

D2

Cr

. 2

. 4

. 4

. 1

. 3

. 0

. 3

. 0

. 0

. 2

. 0

. 0

Ti

. 0

. 0

. 0

. 0

. 2

. 4

. 4

. 1

. 3

. 0

. 3

. 0

. 0

. 2

. 0

. 0

Ti

. 0

. 0

. 0

. 0

Book Book Book (Cont.

(quality

) /

Si

Cr

Ni

Al to

Cu

Sn

Ce qb

D2

. 2

. 1

. 3

. 8

. 6

. 2

. 1

. 5

. 0

. 0

. 2

. 0

. 4

. 0

. 0

. 2

. 1

. 4

. 8

. 6

. 2

. 1

. 5

. 0

. 0

. 2

. 0

. 4

. 0

. 0

D2

Cr

. 2

. 1

. 3

. 0

. 6

. 1

. 3

. 1

. 5

. 0

. 0

. 2

. 0

. 4

. 0

. 0

. 2

. 1

. 4

. 0

. 6

. 1

. 3

. 1

. 5

. 0

. 0

. 2

. 0

. 4

. 0

. 0

Al to

Cu

Sn

. 5 ,allow

Sn

. 0 , but

. 0 ,copper

. C

. 1 , C

6S

. 3

. C e q n / (C

) / (N i +

Cu

) /

D2

D2

Cr

Al to

. 0 ,Do not , but

D2

. C

Ni

Cu

. 7 , but

;when

Ti

The

Al

Ti

. 0

6.2 Manufacturing Methods

6.2.1 Manufacturing Outline

Former steel manufacturing, the manufacturer shall establish manufacturing outline, which shall include the manufacturing process of various manufacturing and inspection processes.

6.2.2 steel smelting method
6.2.2.1

outer arc furnace steel should be used by the Canadian refining and outer vacuum refining process, or oxygen converter plus refining and vacuum refining process,

Or ESR smelting. When the demand side to specify a particular method of smelting, should be specified in the contract.

6.2.2.2

negotiated by both sides, and specified in the contract, may be more demanding other smelting methods.

6.2.3

tube manufacturing methods and requirements of

6.2.3.1

tube should be casting, molding or hot-rolled (forged) methods.

6.2.3.2

Casting tube shall comply with YB/T 4149, wherein the low magnification defect centers crack, crack in the middle, the skin cracks and skin

Level with bubble level should be less than 1, respectively.

Hot rolling (forging) tube should be consistent with the provisions of YB/T 5137's.

Molded tube (ingot) head and tail cut the amount should be sufficient to ensure the quality of steel pipe.

6.2.4 The method of manufacturing a steel pipe

Hot-rolled steel should be used (extrusion, top, forging, expansion) or cold drawn (rolled) seamless method of manufacture. Thermal expansion pipe should refer to the blank pipe by heating the whole

Enlarging the system deformed steel tubes made of higher caliber.

Pipe machining distortion of the total elongation factor (forging ratio) of not less than 3. The manufacturer shall take appropriate manufacturing process to ensure that the pipe

Different parts of the deformation process uniformity.

6.3 Delivery Status

6.3.1

pipe should be normalizing heat treatment delivery. Normalizing heat treatment temperature should be 890 °C ~ 940 °C; holding time shall comply with. press

1mm wall thickness of not less than 1min each calculation, at least 30min. After normalizing steel, it should be cooled in still air.

6.3.2

by the need to agree, and specified in the contract, the pipe can be normalized heat treatment delivery. Positive temperature heat treatment should be

890 °C ~ 940 °C; holding time shall comply with. less than 1min calculated for each 1mm wall thickness by at least 30min. Temperature heat treatment of

It should not be less than 620 °C.

6.3.3

For an outer diameter of not less than 457mm of thermal expansion of steel pipe, steel pipe end when the expansion temperature at 810 °C ~ 940 °C, and the lowest temperature is not the final expansion

Lower than the phase transition critical temperature Ar3, is the result of air-cooled pipe, steel pipe should be considered is the result of normalizing.

6.4 Mechanical Properties

6.4.1 Tensile Properties
6.4.1.1 Tensile properties at room temperature

Room temperature tensile properties of the delivery status of the tubes shall conform to Table 4.

Table 4 at room temperature tensile properties of steel

No. Grade tensile strength

Rma /

MPa

Lower yield strength or proof strength

ReL or RP0.2 /

MPa

Elongation ratio Aa /

Portrait Landscape

1 HD245 410 ~ 550 >=245 >=24 >=22

2 HD245Cr 410 ~ 550 >=245 >=24 >=22

3 HD265 410 ~ 570 >=265 >=23 >=21

4 HD265Cr 410 ~ 570 >=265 >=23 >=21

5 HD280 470 ~ 590 >=275 >=21 >=21

6 HD280Cr 470 ~ 590 >=275 >=21 >=21 a measured tensile strength and elongation after fracture shall comply with. Rm (A-2) > 10500.

6.4.1.2 High Temperature Tensile Properties

Delivery Status steel high-temperature tensile properties shall conform to Table 5.

Table 5 high-temperature tensile properties of steel

No. Grade

Test temperature / tensile strength

Rm /

MPa

Proof strength

RP0.2 /

MPa

1 HD245

250 - >=170

300 - >=149

2 HD245Cr

250 - >=170

300 - >=149

3 HD265 300 >=369 >=154

4 HD265Cr 300 >=369 >=154

5 HD280 300 >=423 >=186

6 HD280Cr 300 >=423 >=186

6.4.1.3 tensile test specimens

An outer diameter less than 219mm of steel pipe, longitudinal tensile test shall be sampled along the pipe.

An outer diameter of not less than 219mm of steel pipe when pipe size permits, tr...

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

Similar standards

How to Download GB/T 24512.1-2009

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
17 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 24512.1-2009

$300.00