Valid

GB/T 2441.8-2010Determination of urea - Part 8: Sulphate content - Visible turbidimetric method (English PDF)

尿素的测定方法 第8部分:硫酸盐含量 目视比浊法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 2441.8-2010 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 30, 2010

Implementation date

January 1, 2011

Scope

GB/T 2441.8-2010 is the English-translated version of 尿素的测定方法 第8部分:硫酸盐含量 目视比浊法.

GB/T 2441.8-2010 is Part 8 of GB/T 2441 and specifies the determination of the sulphate content of industrial used urea by the visible turbidimetric method. Clause 1 makes it applicable to the determination of sulphate content in urea produced by the synthesis of ammonia and carbon dioxide, and states no exclusions.

Clause 2 cites a single document, HG/T 2843, and clause 4 refers back to it for any reagent, solution or water whose specification and preparation method the part does not give.

The principle in clause 3 is that barium chloride solution added into an acidic medium reacts with the sulfate ion and produces white suspension particles of barium sulfate, the turbidity so formed being compared with a standard turbidity.

The reagents shown are a barium chloride solution at 50 g/L and a hydrochloric acid solution at 1 plus 3, after which the page breaks off. The table of contents shows that the clauses not reached are Apparatus, Analytical procedures and Expression of analytical results; the page does not print the foreword, so the drafting bodies are not shown.

It replaces GB/T 2441.8-2001, was issued on 2010-06-30 and has applied since 2011-01-01.

Found what you need?

Document preview — GB/T 2441.8-2010

National Standard of the People's Republic of China

ICS
65.080
Classification
G 20
Replacing
GB/T 2441.8-2001

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword3
  • 1 Scope4
  • 2 Normative References4
  • 3 Principles4
  • 4 Reagents and Solutions4
  • 5 Apparatus5
  • 6 Analytical Procedures5
  • 7 Expression of Analytical Results5

1 Scope

This Part of GB/T 2441 specifies determination of sulphate content in industrial used urea by visible turbidimetric method.

This Part is applicable to the determination of sulphate content in urea produced by the synthesis of ammonia and carbon dioxide.

2 Normative References

The provisions in following documents become the provisions of this Part through reference in this Part of GB/T 2441. For dated references, the subsequent amendments (excluding corrigendum) or revisions do not apply to this Standard, however, parties who reach an agreement based on this Standard are encouraged to study if the latest versions of these documents are applicable. For undated references, the latest edition of the referenced document applies.

HG/T 2843 Chemical Fertilizer Products - Standard Volumetric, Standard, Reagent and Indicator Solutions for Chemical Analysis

3 Principles

Add barium chloride solution into the acidic medium; which reacts with sulfate ion and produces white suspension particles of barium sulfate, the turbidity formed by which shall be compared with the standard turbidity.

4 Reagents and Solutions

When no specification and preparation method are specified for the reagents, solutions and water used in this Part, they shall conform to the provisions of HG/T 2843.

4.1 Barium chloride solution, 50g/L.

4.2 Hydrochloric acid solution, 1+3. […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of GB/T 2441.8

EditionTitleRevisionStatus
GB/T 2441.8-2010Determination of urea - Part 8: Sulphate content - Visible turbidimetric methodcurrent editionCurrent
GB/T 2441.8-2001Determination of urea - Part 8: Sulphate content - Visible turbidimetric methodprevious editionSuperseded

This page sells the current edition, GB/T 2441.8-2010. Earlier editions are listed for reference only.

How to Download GB/T 2441.8-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 2441.8-2010

$75.00