Valid

GB/T 24335-2009Classification of earthquake damage to buildings and special structures (English PDF)

建(构)筑物地震破坏等级划分

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 24335-2009 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 30, 2009

Implementation date

December 1, 2009

Scope

GB/T 24335-2009 is the English-translated version of 建(构)筑物地震破坏等级划分.

GB/T 24335-2009 is the Chinese standard "Classification of earthquake damage to buildings and special structures". Its scope clause reads: This standard specifies the building (structure) building materials and methods of earthquake damage to the principles of classification.

This standard applies to the earthquake site damage survey, natural disaster damage assessment, intensity assessment, building (structure) building safety appraisal, and seismic damage prediction and Engineering repair work. Its clauses include terms and definitions; basic provisions.

Found what you need?

Document preview — GB/T 24335-2009

National Standard of the People's Republic of China

ICS
91.120.25
Classification
P 15

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Introduction
  • 1 Scope
  • 2 Terms and definitions
  • 3 Basic Provisions
  • 4 building damage classification of macroscopic description
  • 5 Common structure damage classification of macroscopic description

1 Scope

This standard specifies the building (structure) building materials and methods of earthquake damage to the principles of classification.

This standard applies to the earthquake site damage survey, natural disaster damage assessment, intensity assessment, building (structure) building safety appraisal, and seismic damage prediction and

Engineering repair work.

2 Terms and definitions

The following terms and definitions apply to this standard.

2.1

System to withstand vertical and lateral loads (wind and seismic loads) consisting mainly of members.

2.2

Do not bear the load of the system components, such as (frame structure, reinforced concrete column story factory building) enclosure wall, since the load-bearing walls, parapets, decorative

Equipment.

2.3

Built during the earthquake (structures) destruction of severity.

3 Basic provisions

3.1 Construction (structures) type

3.1.1

Building types include. masonry buildings; bottom frame house; within the framework of the Housing; reinforced concrete frame structure; reinforced concrete shear

Wall (or barrel) structure; reinforced concrete frame - shear wall (or barrel) structure; steel frame; steel frame - supporting structure; brick column bent structure

Bent open house;; wooden houses; soil stone structure housing steel, reinforced concrete column bent structure plant; plant.

3.1.2

structure types include. chimneys, water towers.

3.2 Construction (structures) damage classification principles

The extent of damage to load-bearing member, taking into account the extent of the destruction of non-load-bearing member and the repair or loss of function of the degree of difficulty and high

As low as division principle.

3.3 Construction (structures) damage classification step

Follow these steps to divide the building (structure) building was destroyed rating.

a) will be built (structures) according to the structure type classification;

b) distinguish the building (structure) buildings bearing member and non-load-bearing member, respectively, of their assessment of the extent of damage;

c) each member of a comprehensive damage, ease of repair and loss of function of the degree of use of the structure, assessment building (structure) building materials break

Bad grades.

3.4 Construction (structures) damage classification basic standards

Level 3.4.1 I. largely intact.

3.4.2 II grade

minor damage.

Level 3.4.3 III. moderate damage.

Level 3.4.4 IV. severely damaged.

GB/T 17742-2020 | DB11/ 239-2016 | GB 50191-2012 | GB/T 18208.1-2026 | GB/T 18207.1-2026 | GB/T 24336-2009 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 24335-2009

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 24335-2009

$225.00