GB/T 24308-2019Code of practice for production and processing of tobacco seeds (English PDF)
烟草种子生产加工技术规程
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 24308-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 10, 2019
Implementation date
June 1, 2019
Scope
GB/T 24308-2019 is the English-translated version of 烟草种子生产加工技术规程.
GB/T 24308-2019 sets the technical requirements and the operating procedures for producing and processing tobacco seed, from germplasm resources and original seed to field seed and pelleted seed.
It applies to the reproduction and regeneration of the germplasm of flue-cured, burley and oriental tobacco and of cigar tobacco, to original breeding, to field production and to pelleted seed processing.
It defines tobacco germplasm, the maintainer line, renewal regeneration, the three-line system, the male and female parents and artificial pollination. It cites GB/T 21138, GB/T 23222, GB/T 25241 and YC/T 344, and an informative Annex A tabulates the traits recorded when tobacco germplasm is renewed.
It replaces GB/T 24308-2009, was issued on 10 May 2019 and has applied since 1 June 2019.
Found what you need?
Document preview — GB/T 24308-2019
National Standard of the People's Republic of China
- ICS
- 65.160
- Classification
- X 87
- Replacing
- GB/T 24308-2009
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Germplasm Resources Reproduction
- 5 original breeding
- 6 Daejeon production
- 7 Pelleted Seed Processing
- Appendix A (informative appendix) Table of Pollutant Renewal Traits of Tobacco Germplasm Resources
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 24308-2009 "Technical Regulations for Tobacco Seed Breeding", compared with GB/T 24308-2009, the main technology The changes are as follows.
--- Increased definition of tobacco germplasm, maintainer, renewal, paternal, maternal, artificial pollination, seed processing and seed initiation (see section 3) chapter);
--- Removed the definition of breeder seeds, stocks and varieties (see Chapter 3 of the 2009 edition);
--- Increased the technical content of breeding and updating of germplasm resources (see Chapter 4);
--- Revised the principle of breeding propagation (see 5.1, version 4.1 of 2009);
--- Revised the technical content and parameters of the original stock breeding original species (see 5.2, 4.2 edition of 2009);
--- Revised the technical content and parameters of Daejeon seed production, and separately specified conventional seed production, hybrid seeds and male sterile lines Seed production (see Chapter 6, Chapter 5 of the 2009 edition);
--- Increased the technical content of pelletized seed processing (see Chapter 7).
Introduction
The issuing body of this document draws attention to the fact that, in conformity with this document, Chapter 7 may be related to "a tobacco germinating coated pellet" Production method" "an aerobic tobacco-coated pelletized seed and preparation method thereof" "an anti-cold and wet stress tobacco coated seed and preparation thereof Methodology The use of related patents, 7.1.3, 7.1.4 and the use of patents related to "CNC germination tanks".
The issuing organization of this document has no position on the authenticity, validity and scope of the patent.
The holder of the patent has assured the issuing authority of this document that he is willing to work with any applicant on reasonable and non-discriminatory terms and conditions.
Negotiate on patent licensing. The patent holder's statement has been filed with the issuing authority of this document.
Patentee. Yunnan Tobacco Agriculture Research Institute, Yuxi Zhongyan Seed Co., Ltd.
Please note that in addition to the above patents, certain aspects of this document may still involve patents. The issuing organization of this document does not undertake to identify these special Liability.
1 Scope
This standard specifies the technical requirements and operating procedures for the production and processing of tobacco germplasm resources, original seeds, field seeds, and pelletized seeds.
This standard applies to the germplasm resources of flue-cured tobacco, burley tobacco, oriental tobacco, cigars, reproductive regeneration, original breeding, field production, and pills. Seed processing.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 21138 Tobacco Seeds
GB/T 23222 Classification and investigation methods of tobacco pests and diseases
GB/T 25241 (all parts) Technical regulations for tobacco intensive breeding
YC/T 344 Tobacco germplasm resource description and data specification
3 Terms and definitions
The following terms and definitions as defined in GB/T 21138 apply to this document.
3.1 Tobacco germplasm
The genetic material that the tobacco parent passes to the offspring.
3.2 Maintain the maintainer line
A variety or line whose characteristic characteristics are consistent with that of the male sterile line and which maintains the male sterile line infertility characteristics.
3.3 Update regeneration
The process of breeding preserved tobacco germplasm resources and maintaining the genetic integrity of the original germplasm.
3.4 Three-ply system
One of the original production methods, Sancha consists of three stages. the plant line, the plant line, and the original seed.
3.5 Male parent
Plants that provide pollen during sexual reproduction.
3.6 Female parent
Plants that receive pollen during sexual reproduction.
3.7 Artificial pollination
The process of manually transferring the paternal pollen to the parent stigma.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 24308
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 24308-2019 | Code of practice for production and processing of tobacco seeds | current edition | Current |
| GB/T 24308-2009 | Code of practice for production and processing of tobacco seeds | previous edition | Superseded |
This page sells the current edition, GB/T 24308-2019. Earlier editions are listed for reference only.
How to Download GB/T 24308-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 21138-2019 — Tobacco seeds
GB/T 23222-2008 — Grade and investigation method of tobacco diseases and insect pests
GB/T 25241.1-2010 — Rules for tobacco intensive seedling production - Part 1: Seedling with float system
Secure payment via Stripe
Payments accepted
GB/T 24308-2019
$205.00