GB/T 24112-2009Electrical equipment of industrial machines - Electrostatic discharge immunity test specifications (English PDF)
工业机械电气设备 静电放电抗扰度试验规范
This is a limited preview
Buy now to download the full PDF (21 pages)
Need quotation for your management?
Get a formal quotation for GB/T 24112-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 11, 2009
Implementation date
November 1, 2009
Scope
GB/T 24112-2009 is the English-translated version of 工业机械电气设备 静电放电抗扰度试验规范.
GB/T 24112-2009 is the Chinese standard "Electrical equipment of industrial machines - Electrostatic discharge immunity test specifications".
Its scope clause reads: This standard specifies the electrical machinery industry, electronic equipment and systems at the time suffered directly from the operator and adjacent objects electrostatic discharge The immunity requirements and test methods, also provides for different environmental and installation conditions of the test level range and test procedures.
This standard aims to establish a common and reproducible reference for assessing industrial machinery and electrical and electronic equipment from electrostatic discharge performance.
This standard applies to static electrical industrial machinery, electronic equipment and systems discharge immunity test. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 24112-2009
National Standard of the People's Republic of China
- ICS
- 25.010
- Classification
- J 09
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Overview
- 5 Test Level
- 6 Test generator
- 7 Test Configuration
- 8 Test Procedure
- 10 13 Test Report
- Appendix A (informative) Notes
- 1 ESD generator diagram
- 5 laboratory tests, examples of desktop equipment test arrangement
- 7 ungrounded desktop device test arrangement
- 8 ungrounded ground equipment testing arrangement
1 Scope
This standard specifies the electrical machinery industry, electronic equipment and systems at the time suffered directly from the operator and adjacent objects electrostatic discharge
The immunity requirements and test methods, also provides for different environmental and installation conditions of the test level range and test procedures.
This standard aims to establish a common and reproducible reference for assessing industrial machinery and electrical and electronic equipment from electrostatic discharge performance.
This standard applies to static electrical industrial machinery, electronic equipment and systems discharge immunity test.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 4365-2003 Electrotechnical terminology Electromagnetic compatibility (IEC 60050 (161).1990, IDT)
GB/T 17626.2-2006 Electromagnetic compatibility - Testing and measurement techniques - Electrostatic discharge immunity test (IEC 61000-4-2.2001,
IDT)
3 Terms and Definitions
This standard uses the following terms and definitions.
3.1
Apparatus, equipment and systems performance and proper performance of undesired deviation.
Note. The "decrease" The term can be used for temporary or permanent failure failure.
3.2
Equipment or system in its electromagnetic environment to work properly and does not constitute impermissible electromagnetic interference to the environment of any transaction ability.
3.3
In the same material or separated from each other with friction or other similar material, the material having the smallest amount of charge generated.
3.4
Electrostatic discharge generator in the capacitor, to represent body charged to a capacitance value of the test voltage, it may be discrete components or points
Distributed capacitance.
3.5
EUT.
GB/T 23819-2023 | GB/T 23821-2022 | GB/T 26118.1-2010 | GB/T 17889.7-2026 | GB/T 16855.1-2025 | GB/T 24111-2009 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.
Similar standards
How to Download GB/T 24112-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 24112-2009
$375.00